C. Ohms | TU Delft Repository

CO

C. Ohms

Conference paper (8)

Doctoral thesis (1)

Journal article (10)

19 records found

1

Investigation of residual stress/strain and texture in a large dissimilar metal weld using synchrotron radiation and neutrons

Conference paper (2014) - C. Ohms (author), RV Martins (author)

Residual stresses in thick bi-metallic fusion welds: a neutron diffraction study

Doctoral thesis (2013) - C. Ohms (author), I.M. Richardson (supervisor), H. Schut (advisor)

Generation IV reactor safety and materials research by the institute for energy and transport at the European Commission¿s Joint Research Centre

Journal article (2013) - K Tucek (author), H Tsige-Tamirat (author), M Laurie (author), K Turba (author), C. Ohms (author), KF Nilsson (author), P Hahner (author), L Ammirabile (author), A Lazaro (author), A Grah (author), J Carlsson (author), Ch Doderlein (author), M Oettingen (author), MA Futterer (author), E D'Agata (author)

Manufacture, residual stress measurement and analysis of a VVER-440 nozzle mockup

Conference paper (2013) - L Tatar (author), G Torok (author), D Smith (author), S Do (author), C. Ohms (author), L Kovacs (author)

Automatic meshing method for optimization of the fusion zone dimensions in finite element models of welds

Conference paper (2013) - K Decroos (author), C. Ohms (author), R.H. Petrov (author), M Seefeldt (author), F Verhaeghe (author), L.A.I. Kestens (author)

Calculation of macroscopic elasto-plastic anisotropy based on an analytical expression of the Orientation Distribution Function in the case of fibre textures

Journal article (2013) - K Decroos (author), M Seefeldt (author), C. Ohms (author), R Petrov (author), F Verhaeghe (author), LAI Kestens (author)

Modelling and characterisation of the texture development in the fusion zone of an austenitic weld

Journal article (2011) - K Decroos (author), M Seefeldt (author), C. Ohms (author), R.H. Petrov (author), F Verhaeghe (author), L.A.I. Kestens (author)

Residual stress measurement by neutron diffraction in a single bead on plate weld - influence of instrument and measurement settings on the scatter of the results

Journal article (2010) - C. Ohms (author), RC Wimpory (author), D Neov (author)

Full 3D spatially resolved mapping of residual strain in a 316L austenitic stainless steel weld specimen

Journal article (2010) - RV Martins (author), C. Ohms (author), K Decroos (author)

Combination of simulation and experiment in designing repair weld strategies: A feasibility study

Journal article (2010) - LK Keppas (author), RC Wimpory (author), DE Katsareas (author), C. Ohms (author)

Full depth-resolved strain mapping of a three-pass slot weld specimen in austenitic stainless steel using the spiral slit technique

Journal article (2010) - RV Martins (author), C. Ohms (author), K Decroos (author)

A step towards a complete uncertainty analysis of residual stress determination using neutron diffraction

Journal article (2010) - RC Wimpory (author), C. Ohms (author)

None

Conference paper (2010) - S Courtin (author), V Robin (author), P Gilles (author), C. Ohms (author)

Residual stress measurement and finite element mapping on a narrow gap dissimilar metal weld pipe

Conference paper (2009) - C. Ohms (author), X Ficquet (author), S Courtin (author), D Neov (author), P Gilles (author), P Joly (author)

Statistical analysis of residual stress determinations using neutron diffraction

Journal article (2009) - RC Wimpory (author), C. Ohms (author), M Hofmann (author), R Schneider (author), AG Youtsos (author)

Residual stress measurements in a three-bead slot weld in a 20 mm carbon steel plate. PVP2009-77496

Conference paper (2009) - C. Ohms (author), RC Wimpory (author), D Neov (author), M Hofmann (author), M Turski (author), R Haigh (author), M. Fitzpatrick (author), L Edwards (author)

Optimising residual stress measurements and predictions in a welded benchmark specimen: A review of phase 2 of the net task group 1 single bead on plate round robin. PVP2009-77157

Conference paper (2009) - MC Smith (author), AC Smith (author), RC Wimpory (author), C. Ohms (author), B Nadri (author), PJ Bouchard (author)

NET TG1: Residual stress assessment by neutron diffraction and finite element modeling on a single bead weld on a steel plate

Journal article (2009) - C. Ohms (author), RC Wimpory (author), DE Katsareas (author), AG Youtsos (author)

None

Conference paper (2009) - S Courtin (author), Ph Gilles (author), P Joly (author), C. Ohms (author), X Ficquet (author)