Background: Accuracy and precision assessment in radiomic features is important for the determination of their potential to characterize cancer lesions. In this regard, simulation of different imaging conditions using specialized phantoms is increasingly being investigated. In this study, the design and evaluation of a modular multimodality imaging phantom to simulate heterogeneous uptake and enhancement patterns for radiomics quantification in hybrid imaging is presented. Methods: A modular multimodality imaging phantom was constructed that could simulate different patterns of heterogeneous uptake and enhancement patterns in positron emission tomography (PET), single-photon emission computed tomography (SPECT), computed tomography (CT), and magnetic resonance (MR) imaging. The phantom was designed to be used as an insert in the standard NEMA-NU2 IEC body phantom casing. The entire phantom insert is composed of three segments, each containing three separately fillable compartments. The fillable compartments between segments had different sizes in order to simulate heterogeneous patterns at different spatial scales. The compartments were separately filled with different ratios of 99mTc-pertechnetate, 18F-fluorodeoxyglucose ([18F]FDG), iodine- and gadolinium-based contrast agents for SPECT, PET, CT, and T1-weighted MR imaging respectively. Image acquisition was performed using standard oncological protocols on all modalities and repeated five times for repeatability assessment. A total of 93 radiomic features were calculated. Variability was assessed by determining the coefficient of quartile variation (CQV) of the features. Comparison of feature repeatability at different modalities and spatial scales was performed using Kruskal-Wallis-, Mann-Whitney U-, one-way ANOVA- and independent t-tests. Results: Heterogeneous uptake and enhancement could be simulated on all four imaging modalities. Radiomic features in SPECT were significantly less stable than in all other modalities. Features in PET were significantly less stable than in MR and CT. A total of 20 features, particularly in the gray-level co-occurrence matrix (GLCM) and gray-level run-length matrix (GLRLM) class, were found to be relatively stable in all four modalities for all three spatial scales of heterogeneous patterns (with CQV < 10%). Conclusion: The phantom was suitable for simulating heterogeneous uptake and enhancement patterns in [18F]FDG-PET, 99mTc-SPECT, CT, and T1-weighted MR images. The results of this work indicate that the phantom might be useful for the further development and optimization of imaging protocols for radiomic quantification in hybrid imaging modalities.@en

Background: Central necrosis can be detected on [¹⁸F]FDG PET/CT as a region with little to no tracer uptake. Currently, there is no consensus regarding the inclusion of regions of central necrosis during volume of interest (VOI) delineation for radiomic analysis. The aim of this study was to assess how central necrosis affects radiomic analysis in PET. Methods: Forty-three patients, either with non-small cell lung carcinomas (NSCLC, n = 12) or with pheochromocytomas or paragangliomas (PPGL, n = 31), were included retrospectively. VOIs were delineated with and without central necrosis. From all VOIs, 105 radiomic features were extracted. Differences in radiomic features between delineation methods were assessed using a paired t-test with Benjamini-Hochberg multiple testing correction. In the PPGL cohort, performances of the radiomic models to predict the noradrenergic biochemical profile were assessed by comparing the areas under the receiver operating characteristic curve (AUC) for both delineation methods. Results: At least 65% of the features showed significant differences between VOI_vital-tumour and VOI_gross-tumour (65%, 79% and 82% for the NSCLC, PPGL and combined cohort, respectively). The AUCs of the radiomic models were not significantly different between delineation methods. Conclusion: In both tumour types, almost two-third of the features were affected, demonstrating that the impact of whether or not to include central necrosis in the VOI on the radiomic feature values is significant. Nevertheless, predictive performances of both delineation methods were comparable. We recommend that radiomic studies should report whether or not central necrosis was included during delineation.

@en

Introduction: In Sierra Leone, access to prostheses is limited due to absence of practical knowledge, materials, trained staff, and high cost. This paper investigates the impact of a 3D printed prosthesis on the health-related quality of life (HRQoL) in prosthesis recipients. Methods: Patients with upper extremity amputations were included in this case study from December 2018 until July 2019. Data on the HRQoL was gathered until April 2020 in Masanga Hospital, central rural Sierra Leone. At two follow-up moments the HRQoL was assessed by applying the standard EQ-5D-5L questionnaire. These two follow-up moments varied between one week and just over a year after receiving the prosthesis. A second patient questionnaire was used to assess prosthesis satisfaction. Results: Seven patients were included. The results of the EQ-5D-5L questionnaire show no deterioration of the HRQoL in any patient and the overall HRQoL increased by almost 20% compared to the null measurement. One patient was lost to follow up after the first re-visit. The responses to the second questionnaire indicated that patients are satisfied with the prosthesis and use it in various situations. Patients often mentioned they feel more included in society when wearing the prosthesis. One patient says wearing the prosthesis helped in accepting the amputation. As a result, enough self-confidence was experienced without the prosthesis and the patients stopped wearing the prosthesis. Discussion: The overall HRQoL in patients wearing a 3D-printed prosthesis increases compared to not wearing one. Assessing the HRQoL at regular intervals is important for the long-term follow-up and to safeguard sustainability and long-term success of this project. Nevertheless, defining the HRQoL is challenging due to cultural differences and misunderstandings. Therefore, the use of alternative questionnaires to define the HRQoL should be investigated. To improve and warrant long-term success, identifying long-term problems is important, and the second questionnaire accounts for this need.

@en

Introduction: To improve carotid artery stenting (CAS), more information about the functioning of the stent is needed. Therefore, a method that can image the flow near and around a stent is required. The aim of this study was to evaluate the performance of high-frame-rate contrast-enhanced ultrasound (HFR CEUS) in the presence of a stent. Methodology: HFR CEUS acquisitions of a carotid artery phantom, a silicone tube with diameter 8 mm, with and without a stent were acquired at transmit voltages of 2V, 4V and 10V using a Verasonics ultrasound system and C5-2 probe. Different concentrations of ultrasound contrast agent (UCA) were tested in a blood mimicking fluid (BMF). Particle image velocimetry (PIV) analysis was performed on Singular Value Decomposition (SVD) filtered images. Mean and peak velocities, and correlation coefficients were compared between stented and non-stented regions. Also, experimental results were compared with theoretical and numerical models. Results: The averaged experimental mean velocity (0.113 m/s) was significant lower than the theoretical and numerical mean velocity (0.129 m/s). The averaged experimental peak velocity (0.152 m/s) was significant lower than the theoretical and numerical peak velocity (0.259 m/s). Correlation coefficients and averaged mean velocity values were lower (difference of 0.022 m/s) in stented regions compared to non-stented regions. Conclusion: In vitro experiments showed an underestimation of mean and peak velocities in stented regions compared to non-stented regions. However, the microbubbles can be tracked efficiently and the expected laminar flow profile can be quantified using HFR CEUS near and around a stent.

@en