Climate change, due to the continued emissions of carbon dioxide into our atmosphere and subsequent warming of the planet, is an existential crisis facing humanity. The rising temperature is are resulting in the melting of our ice caps and glaciers, influencing the weather patterns, are making many parts of the world unliveable and are driving many species into extinction. If the current trend is continued, catastrophic and irreversible effects to our planet is almost guaranteed. To tackle this issue, we need to immediately find a viable replacement for the carbon emitting fossil fuels currently used in our energy, transportation and chemical infrastructures. Moving to renewable energy sources like wind and solar energy is already proving to be the answer to this problem. However, in-order to scale the use of these non-emitting sustainable energy sources rapidly, some of the issues associated with these sources like the intermittency and the heavy reliance of fossil fuels in the hard to electrify sectors need to be dealt with....@en

Finding alternative ways to tailor the electronic properties of a catalyst to actively and selectively drive reactions of interest has been a growing research topic in the field of electrochemistry. In this Letter, we investigate the tuning of the surface electronic properties of electrocatalysts via polymer modification. We show that when a nickel oxide water oxidation catalyst is coated with polytetrafluoroethylene, stable Ni-CFx bonds are introduced at the nickel oxide/polymer interface, resulting in shifting of the reaction selectivity away from the oxygen evolution reaction and toward hydrogen peroxide formation. It is shown that the electron-withdrawing character of the surface fluorocarbon molecule leaves a slight positive charge on the water oxidation intermediates at the adjacent active nickel sites, making their bonds weaker. The concept of modifying the surface electronic properties of an electrocatalyst via stable polymer modification offers an additional route to tune multipathway reactions in polymer/electrocatalyst environments, like with ionomer-modified catalysts or with membrane electrode assemblies.

@en

Detailed knowledge about the semiconductor/electrolyte interface in photoelectrochemical (PEC) systems has been lacking because of the inherent difficulty of studying such interfaces, especially during operation. Current understandings of these interfaces are mostly from the extrapolation of ex situ data or from modeling approaches. Hence, there is a need for operando techniques to study such interfaces to develop a better understanding of PEC systems. Here, we use operando photoelectrochemical attenuated total reflection Fourier transform infrared (PEC-ATR-FTIR) spectroscopy to study the metal oxide/electrolyte interface, choosing BiVO4 as a model photoanode. We demonstrate that preferential dissolution of vanadium occurs from the BiVO4/water interface, upon illumination in open-circuit conditions, while both bismuth and vanadium dissolution occurs when an anodic potential is applied under illumination. This dynamic dissolution alters the surface Bi:V ratio over time, which subsequently alters the band bending in the space charge region. This further impacts the overall PEC performance of the photoelectrode, at a time scale very relevant for most lab-scale studies, and therefore has serious implications on the performance analysis and fundamental studies performed on this and other similar photoelectrodes.

@en

Recent advances in photoelectrochemical redox flow cells, such as solar redox flow batteries, have received much attention as an alternative integrated technology for simultaneous conversion and storage of solar energy. Theoretically, it has been reported that even single- photon devices can demonstrate unbiased photo-charging with high solar-to-chemical con- version efficiency; however, the poor redox kinetics of photoelectrodes reported thus far severely limit the photo-charging performance. Here, we report a band alignment design and propose surface coverage control to reduce the charge extraction barrier and create a facile carrier pathway from both n- and p-type photoelectrodes to the electrolyte with the respective redox reaction. Based on these observations, we develop a single-photon photo- charging device with a solar-to-chemical conversion efficiency over 9.4% for a redox flow cell system. Along with these findings, we provide design principles for simultaneous optimisa- tion, which may lead to enhanced conversion efficiency in the further development of solar- rechargeable redox flow cells.@en

During hydrogen production for (renewable) energy storage, direct seawater electrolysis offers several notable advantages over freshwater electrolysis. Unfortunately, it is also hindered by possible oxidation reactions of chloride and (to a lesser extent) bromide, which can occur in parallel to the evolution of oxygen and form harmful by-products at the anode. Although the respective oxidation reactions of Br^- and Cl^- have been researched quite well on Pt, not much is known concerning bromide oxidation and its effect on the evolution of chlorine and oxygen for metal oxides, which are the class of electrocatalysts overwhelmingly used in industry. Using glassy carbon-supported iridium oxide (IrO_x) as a model system, we investigated the oxidation behaviour of this well-known oxygen evolution catalyst in an acidic Br^-/Cl^- electrolyte. We first briefly discuss the solution chemistry and oxidation products that may be expected. Model studies were performed of the parallel evolution of Br₂, Cl₂ and O₂ to increase the understanding of the anodic competition problem, with a special focus on the selectivity towards oxygen. Using rotating ring-disk voltammetry and UV–Vis spectroscopy, our results suggest that bromide and chloride competitively absorb on IrO_x, but do not alter each other's oxidation reaction mechanisms, which both seem to adhere best to a Volmer-Heyrovský mechanism. We also find that bromide and chloride adsorption significantly slow down the oxygen evolution reaction, in an additive way. Even a relatively small amount of bromide highly affected the oxygen evolution selectivity. Formation of the interhalogen compound BrCl, which is possible in a mixed Br^-/Cl^- electrolyte, does not seem to occur.

@en

Hydrogen production from seawater electrolysis is highly promising for the capture and storage of intermittent renewable energy, but is hindered by the possibility of unwanted reactions at the anode. The oxidation reactions of chloride and (to a lesser extent) bromide, which can occur in parallel to the evolution of oxygen, lead to environmentally harmful by-products and thus represent undesirable side-reactions. We present some general considerations of solution chemistry and oxidation products that may be expected in a mixed acidic bromide/chloride electrolyte. We performed electrochemical model studies of the simultaneous oxidation of bromide and chloride and their mutual interaction on a Pt electrocatalyst, with the aim of deepening the general understanding of the anodic competition problem. Using simplified model systems, our findings suggest that the oxidation of bromide is hindered by competing chloride adsorption, in a way that can be quite satisfactorily modelled by a simple Langmuir isotherm describing the competing adsorption and reactivity of all species. The oxidation of chloride was however not properly captured by this same model, and may be substantially different. Furthermore, the formation of the interhalogen compound BrCl seems to occur in-between the oxidation of bromide and chloride.

@en

Photocharging has recently shown the ability to significantly improve the performance of several metal oxide photoanodes, similar to the enhancements achieved with co-catalysts and passivation overlayers. Herein, we demonstrate the effect of photocharging on CuWO₄ photoanodes for the first time, with prolonged AM 1.5 illumination under open-circuit conditions. The photocharging treatment on CuWO₄ samples doubled the photocurrent obtained at 1.23 V_RHE. This enhancement is attributed to the light induced formation of a surface bound copper complex with the solution anion species in the electrolyte. This thin semiconducting copper borate layer forms a heterojunction with the CuWO₄, improving the charge separation near the surface and thus suppressing the recombination of charge carriers in the space charge region. The striking similarities in photocharging of different metal oxide semiconductors highlights that the metal oxide semiconductor-electrolyte interface is more complex than previously understood. The formation of this time-dependent light induced surface layer should therefore be considered in all experimental studies on photo-electrochemistry with metal oxide semiconductor photoanodes.

@en

Electrocatalysis of carbon dioxide can provide a valuable pathway towards the sustainable production of chemicals and fuels from renewable electricity sources. One of the main challenges to enable this technology is to find suitable electrodes that can act as efficient, stable and selective CO₂ reduction catalysts. Modified silver catalysts and in particular, catalysts electrochemically derived from silver-oxides, have shown great promise in this regard. Here, we use operando EXAFS analysis to study the differences in surface composition between a pure silver film and oxide-derived silver catalysts-a nanostructured catalyst with improved CO₂ reduction performance. The EXAFS analysis reveals the presence of trace amounts of oxygen in the oxide-derived silver samples, with the measured oxygen content correlating well with experimental studies showing an increase in CO₂ reduction reactivity towards carbon monoxide. The selectivity towards CO production also partially scales with the increased surface area, showing that the morphology, local composition and electronic structure all play important roles in the improved activity and selectivity of oxide-derived silver electrocatalysts. Earlier studies based on X-ray photoelectron spectroscopy (XPS) were not able to identify this oxygen, most likely because in ultra-high vacuum conditions, silver can self-reduce to Ag⁰, removing existing oxygen species. This operando EXAFS study shows the potential for in situ and operando techniques to probe catalyst surfaces during electrolysis and aid in the overall understanding of electrochemical systems.

@en

Photocharging has recently been demonstrated as a powerful method to improve the photoelectrochemical water splitting performance of different metal oxide photoanodes, including BiVO₄. In this work, we use ambient-pressure X-ray Raman scattering (XRS) spectroscopy to study the surface electronic structure of photocharged BiVO₄. The O K edge spectrum was simulated using the finite difference method near-edge structure program package, which revealed a change in electron confinement and occupancy in the conduction band. These insights, combined with ultraviolet-visible spectroscopy and X-ray photoelectron spectroscopy analyses, reveal that a surface layer formed during photocharging creates a heterojunction with BiVO₄, leading to favorable band bending and strongly reduced surface recombination. The XRS images presented in this work exhibit good agreement with soft X-ray absorption near-edge structure spectra from the literature, demonstrating that XRS is a powerful tool to study the electronic and structural properties of light elements in semiconductors. Our findings provide direct evidence of the electronic modification of a metal oxide photoanode surface as a result of the adsorption of electrolyte anionic species under operating conditions. This work highlights that the surface adsorption of these electrolyte anionic species is likely present in most studies on metal oxide photoanodes and has serious implications for the photoelectrochemical performance analysis and fundamental understanding of these materials.

@en

The conversion of light to electrical and chemical energy has the potential to provide meaningful advances to many aspects of daily life, including the production of energy, water purification, and optical sensing. Recently, plasmonic nanoparticles (PNPs) have been increasingly used in artificial photosynthesis (e.g., water splitting) devices in order to extend the visible light utilization of semiconductors to light energies below their band gap. These nanoparticles absorb light and produce hot electrons and holes that can drive artificial photosynthesis reactions. For n-type semiconductor photoanodes decorated with PNPs, hot charge carriers are separated by a process called hot electron injection (HEI), where hot electrons with sufficient energy are transferred to the conduction band of the semiconductor. An important parameter that affects the HEI efficiency is the nanoparticle composition, since the hot electron energy is sensitive to the electronic band structure of the metal. Alloy PNPs are of particular importance for semiconductor/PNPs composites, because by changing the alloy composition their absorption spectra can be tuned to accurately extend the light absorption of the semiconductor. This work experimentally compares the HEI efficiency from Ag, Au, and Ag/Au alloy nanoparticles to TiO₂ photoanodes for the photoproduction of hydrogen. Alloy PNPs not only exhibit tunable absorption but can also improve the stability and electronic and catalytic properties of the pure metal PNPs. In this work, we find that the Ag/Au alloy PNPs extend the stability of Ag in water to larger applied potentials while, at the same time, increasing the interband threshold energy of Au. This increasing of the interband energy of Au suppresses the visible-light-induced interband excitations, favoring intraband excitations that result in higher hot electron energies and HEI efficiencies.

@en