We constrain fracture networks in flat-lying shallow water carbonates producing fracture models at scale from cm-to tens of meters over a large area of several tens of km2.Imaging is integrated with structural observation on the ground and isotope studies on the vein infill. Structures observed are sub-vertical mode I and hybrid veins displaying a conjugate pattern, sub-vertical stylolites and sub-horizontal stylolites. The structures formed during subsidence through a stress field characterized by the presence of a significant sub-horizontal tectonic stress. Little deformation occurred in the uppermost 400-500m. Wholesale fracturing affected the carbonates at depths between 500 and 800m resulting in a pervasive network of open fractures and stylolites. Increasing development of sub-horizontal stylolites generated the calcite which eventually sealed the fractures. Using the acquired fracture network, we test the impact of different aperture models on flow simulations @en

Geological well testing is a valuable tool that allows us to improve understanding of pressure transient behaviour in a fractured reservoir. However, not all wells in a fractured reservoir will show pressure transients that are expected for NFRs. Our findings demonstrate that high resolution models with proper grid refinement around the wells and fractures are required to model pressure transient behaviour adequately and produce a physically meaningful wellbore response for a fractured reservoir. The key concept for interpreting well test data from fractured reservoirs is the dual-porosity model. This model, originally developed by Warren and Root (1963) has been the industry standard for modelling NFRs and interpreting well-test data from NFRs for more than 50 years. Although there are a number of factors impacting the exact shape of the pressure transients, our results suggest that observing the classical “V-shape” in the pressure derivative, as expected from a dual-porosity model may be an exception, rather than a rule in NFR, even for well-connected fracture networks. Our work quantifies when and why the assumptions inherent to the dual-porosity model break down when interpreting well-test data from NFR. @en

Despite the scarcity of major deformation structures such as folds and faults, the flat-lying, post-rift shallow water carbonates of the Jandaira Formation (Potiguar Basin, NE Brazil) display well-organized fracture systems distributed of tens of km2. Structures observed in the outcropping carbonates are sub-vertical, generally N-S trending mode I and hybrid veins and barren fractures, sub-vertical roughly E-W trending stylolites and sub-horizontal stylolites. These features developed during subsidence in a simple and constant stress field characterized by, beside gravity, a significant horizontal stress probably of tectonic origin. The corresponding depth curves have different origin and slopes and, therefore, cross each other resulting in position of the principal stresses which change with depth. As a result, the type and amount of fractures affecting subsiding rocks change despite the fact that the far-field stresses remain constant. Following early diagenesis and porosity elimination in the first 100-200m depth, Jandaira carbonates experienced wholesale fracturing at depths of 400-800m resulting in a network of NNW-NE trending fractures partly organized in conjugate sets with a low interfault angle and a sub-vertical intersection, and sub-vertical stylolites roughly perpendicular to the fractures. Intense fluid circulation was activated as a consequence through the carbonates. With increasing subsidence, sub-horizontal stylolites formed providing calcite which precipitated in the open fractures transforming them in veins. The Jandaira formation lost thereby the permeability it had reached during the previous stage. Because of the lack of major deformation, the outcrops of the Jandaira Formation is an excellent analog for carbonate reservoirs in the Middle East, South Atlantic and elsewhere. @en