When a linear controller is replaced by a reset controller, it is possible to keep the gain behaviour essentially the same, while improving the phase behaviour. However, because reset control is nonlinear, higher order harmonics appear, which may deteriorate the results. In this paper, reset controllers are combined with fractional derivatives, decreasing the magnitude of higher order harmonics. In this way, better results are found in simulations of a Clegg integrator, of a FORE (first order reset element), and of a CgLp (constant in gain lead in phase) controller. The reason why better results are found is explained.@en

This article introduces a closed-loop frequency analysis tool for reset control systems. To begin with sufficient conditions for the existence of the steady-state response for a closed-loop system with a reset element and driven by periodic references are provided. It is then shown that, under specific conditions, such a steady-state response for periodic inputs is periodic with the same period as the input. Furthermore, a framework to obtain the steady-state response and to define a notion of closed-loop frequency response, including high order harmonics, is presented. Finally, pseudosensitivities for reset control systems are defined. These simplify the analysis of this class of systems and allow a direct software implementation of the analysis tool. This methods gives deeper insight into the performance of the system than that achieved with the describing function method.

@en

This paper addresses a phenomenon caused by resetting only one of the two states of a so-called second order 'Constant in gain Lead in phase' (CgLp) element. CgLp is a recently introduced reset-based nonlinear element, bound to circumvent the well-known linear control limitation - the waterbed effect. The ideal behaviour of such a filter in the frequency domain is unity gain while providing a phase lead for a broad range of frequencies, which clearly violates the linear Bode's gain phase relationship. However, CgLp's ideal behaviour is based on a describing function, which is a first order approximation that neglects the effects of higher order harmonics in the output of the filter. Consequently, achieving the ideal behaviour is challenging when higher order harmonics are relatively large. It is shown in this paper that by resetting only one of the two states of a second order CgLp, the nonlinear filter will act as a linear one at a certain frequency, provided that some conditions are met. This phenomenon can be used to the benefit of reducing higher order harmonics of CgLp's output and achieving the ideal behaviour and thus better performance in terms of precision.

@en