The application of a porous coating to a cylinder can significantly reduce the vortex shedding tone when placed in a uniform flow. The mechanism of how this porous media attenuates vortex shedding has been studied more in recent years yet it is still not fully understood. Typical porous materials within a certain range of porosity and airflow resistivity, such as metal foam and porous polyurethane, have been studied extensively; however, the fundamental flow mechanisms responsible for vortex shedding attenuation are very difficult to determine. For example, it is nearly impossible to visualize the internal flow field of porous media with a randomized open-cell internal structure. A Structured Porous Coated Cylinder (SPCC) was designed in recent years to alleviate this internal flow field problem, as the SPCC has clear line of sight along the span and radial direction. SPCC variations have been previously studied and shown to reduce the vortex shedding tone of a bare cylinder in a very similar manner as a randomized porous coated cylinder. In this paper, we present a Tomographic Particle Image Velocimetry study of an SPCC tested in a water tunnel, revealing the previously unseen internal and near-wall flow fields of an SPCC. The flow is visualized in the porous layers, revealing complex interaction between the freestream flow field and the porous structure. Using cross-correlation methods within the flow field, we reveal the entrainment of the flow within the porous layers. Furthermore, implementation of Proper Orthogonal Decomposition shows that vortex shedding occurs within the porous layers. @en

View Video Presentation: https://doi-org.tudelft.idm.oclc.org/10.2514/6.2021-2226.vid

The mechanisms responsible for vortex shedding reduction, due to the application of a porous coating to a smooth cylinder placed in uniform flow, are still uncertain despite several numerical and experimental studies. To help understand these mechanisms, a transparent Structured Porous Coated Cylinder (SPCC) was manufactured to investigate the internal and near-wall flow fields. The SPCC mimics the more commonly used porous materials such as metal foam and polyurethane, that possess randomized structures preventing a clear line-of-sight along the span and circumference of the porous layers. Tomographic Particle Image Velocimetry was used in a water-tunnel facility to investigate three small regions of an SPCC, on the windward, mid-region and leeward sides. In this paper, previously unseen experimentally obtained internal flow fields of a porous coated cylinder are presented. The following summarize the key observations (1) stagnation from freestream flow to the inner cylinder diameter in the windward region, (2) boundary layer profiles within the porous layer in the circumferential mid-region and (3) bleeding from the porous layer into the wake in the leeward region. These results provide key experimental findings for comparison and validation of numerical simulations of bulk porous media, such as the Darcy-Forscheimer method used in conjunction with the Ffowcs Williams-Hawkings acoustic analogy.@en

Porous coated cylinders have been shown to reduce the vortex shedding tone and broadband noise of a bare cylinder placed in uniform flow within specific Reynolds number regimes. The processes by which the vortex shedding and thus tone suppression take place are still uncertain despite numerous numerical and experimental studies. It is understood that adding a porous medium to a bare cylinder will have an influence on the Reynolds number of cylinder, yet the increase of outer diameter alone and the influences of surface roughness are insufficient to explain the changes in the shedding tone magnitude and frequency that are observed by many. Investigating the internal flow field of a porous coated cylinder could lead to a deeper understanding of the flow processes that result in the tonal noise reduction. This has not been achieved to date, as commonly used materials such as metal foam and polyurethane possess randomized porous structures, which make investigating the internal flow field nearly impossible without affecting the structure itself. This paper presents a preliminary analysis of the internal and external flow fields of two structured porous coated cylinders. The cylinders were manufactured using solid transparent materials that possess direct lines of sight through the pores in the axial and spanwise directions. Such structured porous coated cylinders have been previously successful in reducing the typical vortex shedding tone. Tomographic and 2-D planar Particle Image Velocimetry (PIV) were used in a water-tunnel facility to visualize the internal and external flow fields. To date only the 2-D planar PIV results have been post-processed that reveal differences in the wake for the two different cylinder types such as recirculation of flow around the pores. Vorticity flow structures are observed to vary along the cylinder span in the same pattern as the porous structure and streamlines at the windward cylinder side reveal the entry of flow into the porous medium. @en