Wet-chemical approach is widely applied for phosphate recovery from incinerated ash of waste activated sludge (WAS), along with metals removed/recovered. The high contents of both aluminum (Al) and iron (Fe) in WAS-incinerated ash should be suitable for producing coagulants with some waste anions like Cl⁻ and SO₄²⁻ With acid (HCl) leaching and metals’ removing, approximately 88 wt% of phosphorus (P) in the ash could be recovered as hydroxylapatite (HAP: Ca₅(PO₄)₃OH); Fe³⁺ in the acidic leachate could be selectively removed/recovered by extraction with an organic solvent of tributyl phosphate (TBP), and thus a FeCl₃-based coagulant could be synthesized by stripping the raffinate with the original brine (containing abundant Cl⁻ and SO₄²⁻). Furthermore, a liquid poly-aluminum chloride (PAC)-based coagulant could also be synthesized with Al³⁺ removed from the ash and the brine, which behaved almost the same in the coagulation performance as a commercial coagulant on both phosphate and turbidity removals. Both P-recovery from the ash and coagulant production associated with the brine would enlarge the markets of both ‘blue’ phosphate and ‘green’ coagulants.

Sludge incineration and seawater desalination are two approaches that can be used in the disposal of waste activated sludge (WAS) and for obtaining fresh water. As resource recovery from wastewater treatment and water purification is a topic of particular interest in these times, “water mining” has become a focus of research, with phosphate/P-recovery from WAS incineration ash, and extraction of useful elements from the brine of desalination being important steps in the pursuit of a circular/blue economy. However, P-recovery from ash involves removing metals, which need to be disposed of carefully, as does the brine collected. If cations in the ash and anions in the brine could be combined in order to produce coagulants/flocculants, a new circular model would be established. A preliminary experiment for this purpose has demonstrated that a liquid poly‑aluminum chloride (PAC) could be synthesized from the aluminum ion/Al³⁺ removed from the ash and the original brine. With this work, we synthesized the liquid PAC by a hydrothermal method, and the results from infrared spectrometer demonstrated that the synthesized PAC was similar to a commercial PAC. Moreover, the synthesized PAC was able to efficiently reduce the effluent turbidity of wastewater treatment plants (WWTPs), especially when compared with the commercial PAC. It is therefore important that research in this area be continued in order to improve the quality of synthesized coagulants and to produce different coagulants based on cations and anions in ash and brine.

There has been increasing interest in wireless, miniaturized implantable medical devices for in vivo and in situ physiological monitoring. Here, we present such an implant that uses a conventional ultrasound imager for wireless powering and data communication and acts as a probe for real-time temperature sensing, including the monitoring of body temperature and temperature changes resulting from therapeutic application of ultrasound. The sub-0.1-mm³, sub-1-nW device, referred to as a mote, achieves aggressive miniaturization through the monolithic integration of a custom low-power temperature sensor chip with a microscale piezoelectric transducer fabricated on top of the chip. The small displaced volume of these motes allows them to be implanted or injected using minimally invasive techniques with improved biocompatibility. We demonstrate their sensing functionality in vivo for an ultrasound neurostimulation procedure in mice. Our motes have the potential to be adapted to the distributed and localized sensing of other clinically relevant physiological parameters.

Emerging non-imaging ultrasound applications, such as ultrasonic wireless power delivery to implantable devices and ultrasound neuromodulation, require wearable form factors, millisecond-range pulse durations and focal spot diameters approaching 100 μm with electronic control of its three-dimensional location. None of these are compatible with typical handheld linear array ultrasound imaging probes. In this work, we present a 4 mm × 5 mm 2D ultrasound phased array transmitter with integrated piezoelectric ultrasound transducers on complementary metal-oxide-semiconductor (CMOS) integrated circuits, featuring pixel-level pitch-matched transmit beamforming circuits which support arbitrary pulse duration. Our direct integration method enabled up to 10 MHz ultrasound arrays in a patch form-factor, leading to focal spot diameter of ∼200 μm, while pixel pitch-matched beamforming allowed for precise three-dimensional positioning of the ultrasound focal spot. Our device has the potential to provide a high-spatial resolution and wearable interface to both powering of highly-miniaturized implantable devices and ultrasound neuromodulation.

Invasive Spartina alterniflora (S. alterniflora), a native riparian species in the U.S. Gulf of Mexico, has led to serious degradation to the ecosystem and biodiversity as well as economic losses since it was introduced to China in 1979. Although multi-temporal remote sensing offers unique capability to monitor S. alterniflora over large areas and long time periods, three major hurdle exist: (1) in the coastal zone where S. alterniflora occupies, frequent cloud coverage reduces the number of available images that can be used; (2) prominent spectral variations exist within the S. alterniflora due to phonological variations; (3) poor spectral separability between S. alterniflora and its co-dominant native species is often presented in the territories where S. alterniflora intruded in. To articulate these questions, we proposed a new pixel-based phenological feature composite method (Ppf-CM) based on Google Earth Engine. The Ppf-CM method was brainstormed to battle the aforementioned three hurdles as the basic unit for extracting phonological feature is individual pixel in lieu of an entire image scene. With the Ppf-CM-derived phenological feature as inputs, we took a step further to investigate the performance of the latest deep learning method as opposed to that of the conventional support vector machine (SVM); Lastly, we strive to understand how S. alterniflora has changed its spatial distribution in the Beibu Gulf of China from 1995 to 2017. As a result, we found (1) the developed Ppf-CM method can mitigate the phonological variation and augment the spectral separability between S. alterniflora and the background species regardless of the significant cloud coverage in the study area; (2) deep learning, compared to SVM, presented better potentials for incorporating the new phenological features generated from the Ppf-CM method; and (3) for the first time, we discovered a S. alterniflora invasion outbreak occurred during 1996–2001.