The carbon partitioning and lengthening rate of bainitic ferrite (α_b) are excellent experimental parameters to estimate our level of understanding of the mechanism of bainitic transformation from a continuum perspective and our ability to capture it in analytical expressions. For Fe-C alloys and relatively simple steels the classical Zener-Hillert theory captures the bainitic transformation rather well but mispredicts the level of carbon in solution in the bainite and overestimates the lengthening rates for transformations at lower temperatures. To address this issue, this paper presents a new thermo-kinetic model based on the Zener-Hillert theory and the Gibbs energy balance concept to simulate the lengthening behavior of α_b in the Fe-C and low alloyed steels. The model incorporates the effect of the temperature dependent carbon diffusion within the migrating interface via a temperature dependent ferrite/austenite interfacial energy and a temperature dependent diffusion coefficient but does not impose local equilibrium across the interface. The good agreement between the model predictions and nine sets of published experiments indicates that both the carbon supersaturation in α_b and the slower lengthening rate are caused by carbon diffusion within the migrating interface. It is found that the degree of carbon supersaturation in α_b increases significantly with decreasing temperature. Consequently, the enhanced carbon solute drag effect, resulting from carbon diffusion within the interface, strongly retards the lengthening rates of α_b at lower temperatures. Transformation strain is shown to have a modest effect on the lengthening rates but to lower the degree of carbon supersaturation.

Over many decades, significant efforts have been made to improve the strength-elongation product of advanced high strength steels (AHSSs) by creating tailored multi-phase microstructures. Successive solid-state phase transformations for steels with a well selected chemical composition turned out to be the key instrument in the realisation of such microstructures. In this contribution, we first provide a brief review of the desired microstructures for Transformation-induced plasticity (TRIP), Carbide-free Bainitic (CFB), Quenching & Partitioning (Q&P) and Medium Manganese steels followed by comprehensive discussions on the phase transformations to be used in their creation. The implications for the steel composition to be selected are addressed too. As the presence of the right amount and type of metastable retained austenite (RA) is of crucial importance for the mechanical performance of these AHSSs, special attention is paid to the important role of successive solid-state phase transformations in creating the desired fraction and composition of RA by suitable element partitioning (in particular C and Mn). This critical partitioning not only takes place during final cooling (austenite decomposition) but also during the back transformation (austenite reversion) during reheating. This review aims to be more than just descriptive of the various findings, but to present them from a coherent thermodynamic / thermo-kinetic perspective, such that it provides the academic and industrial community with a rather complete conceptual and theoretical framework to accelerate the further development of this important class of steels. The detailed stepwise treatment makes the review relevant not only for experts but also metallurgists entering the field.