The vector field method was originally proposed to guide a single fixed-wing Unmanned Aerial Vehicle (UAV) towards a desired path. In this work, a non-uniform vector field method is proposed that changes in both magnitude and direction, for the purpose of achieving formations of UAVs. As compared to related work in the literature, the proposed formation control law does not need to assume absence of wind. That is, due to the effect of the wind on the UAV, one can handle the UAV air speed being different from its ground speed, and the UAV heading angle being different from its course angle. Stability of the proposed formation method is analyzed via Lyapunov stability theory, and validations are carried out in software-in-the-loop and hardware-in-the-loop comparative experiments. Note to Practitioners - The software-in-the-loop and hardware-in-the-loop experiments, which are done with PX4 autopilot software and hardware, show that the proposed method can be implemented on board of UAVs and integrated with the control architecture of existing autopilot suites. Comparisons with standard formation algorithms show that the proposed method is effective in achieving formation in different path scenarios.

@en

Unmanned Aerial Vehicles (UAVs) have been emerging as a promising but challenging platform for studying autonomous and cooperative control. This Ph.D. thesis focuses on fixed-wing UAVs which, with their more efficient aerodynamics, can ensure longer flight durations and more autonomy than multi-rotorUAVs. However, in the current state of the art, limited work has been done on deploying formations of fixed-wing UAVs that can operate autonomously even in the presence of large uncertainties. Uncertainties in fixed-wing UAVs include uncertain wind environments, unmodelled longitudinal/lateral dynamics, uncertain load conditions, uncertain communication conditions among the UAVs, and other uncertain factors. Within this PhD thesis we develope novel adaptive and distributed guidance approaches for fixed-wing UAVs. The following three aspects are studied: * Vector field guidance under uncertainties * Distributed formation control with uncertain UAV dynamics * Testing in the real world to achieve Sim-to-Real transfer@en

The high maneuverability of fixed-wing unmanned aerial vehicles (UAVs) exposes these systems to several dynamical and parametric uncertainties, severely affecting the fidelity of modeling and causing limited guidance autonomy. This article shows enhanced autonomy via adaptation mechanisms embedded in the guidance law: a vector-field method is proposed that does not require a priori knowledge of the UAV course time constant, coupling effects, and wind amplitude/direction. Stability and performance are assessed using the Lyapunov theory. The method is tested on software-in-the loop and hardware-in-the-loop UAV platforms, showing that the proposed guidance law outperforms state-of-the-art guidance controllers and standard vector-field approaches in the presence of significant uncertainty.

@en

Reliable guidance of fixed-wing Unmanned Aerial Vehicles (UAVs) is challenging, as their high maneuverability exposes them to several dynamical changes and parametric uncertainties. Reliability of state-of-the-art guidance methods is often at stake, as these methods heavily rely on precise UAV course dynamics, assumed in a decoupled first-order form with known time constant. To improve reliability of guidance for fixed-wing UAVs, this work proposes a novel vector field law that can handle uncertain course time constant and state-dependent uncertainty in the course dynamics arising from coupling. Stability is studied in the Lyapunov framework, while reliability of the proposed method is tested on a software-in-the loop UAV simulator. The simulations show that, in the presence of such uncertainty, the proposed method outperforms the standard vector field approaches.

@en

The actual performance of model-based path-following methods for unmanned aerial vehicles (UAVs) shows considerable dependence on the wind knowledge and on the fidelity of the dynamic model used for design. This study analyzes and demonstrates the performance of an adaptive vector field (VF) control law which can compensate for the lack of knowledge of the wind vector and for the presence of unmodeled course angle dynamics. Extensive simulation experiments, calibrated on a commercial fixed-wing UAV and proven to be realistic, show that the new VF method can better cope with uncertainties than its standard version. In fact, while the standard VF approach works perfectly for ideal first-order course angle dynamics (and perfect knowledge of the wind vector), its performance degrades in the presence of unknown wind or unmodeled course angle dynamics. On the other hand, the estimation mechanism of the proposed adaptive VF effectively compensates for wind uncertainty and unmodeled dynamics, sensibly reducing the path-following error as compared to the standard VF.

@en

Unmanned Aerial Vehicles (UAVs) have multi-domain applications, fixed-wing UAVs being a widely used class. Despite the ongoing research on the topics of guidance and formation control of fixed-wing UAVs, little progress is known on implementation of semi-physical validation platforms (software-in-the-loop or hardware-in-the-loop) for such complex autonomous systems. A semi-physical simulation platform should capture not only the physical aspects of UAV dynamics, but also the cybernetics aspects such as the autopilot and the communication layers connecting the different components. Such a cyber-physical integration would allow validation of guidance and formation control algorithms in the presence of uncertainties, unmodelled dynamics, low-level control loops, communication protocols and unreliable communication: These aspects are often neglected in the design of guidance and formation control laws for fixed-wing UAVs. This paper describes the development of a semi-physical platform for multi-fixed wing UAVs where all the aforementioned points are carefully integrated. The environment adopts Raspberry Pi’s programmed in C++, which can be interfaced to standard autopilots (PX4) as a companion computer. Simulations are done in a distributed setting with a server program designed for the purpose of routing data between nodes, handling the user inputs and configurations of the UAVs. Gazebo-ROS is used as a 3D visualization tool.

@en

This paper discusses the design and software-in-the-loop implementation of adaptive formation controllers for fixed-wing unmanned aerial vehicles (UAVs) with parametric uncertainty in their structure, namely uncertain mass and inertia. In fact, when aiming at autonomous flight, such parameters cannot assumed to be known as they might vary during the mission (e.g. depending on the payload). Modelingg and autopilot design for such autonomous fixed-wing UAVs are presented. The modeling is implemented in Matlab, while the autopilot is based on ArduPilot, a popular open-source autopilot suite. Specifically, the ArduPilot functionalities are emulated in Matlab according to the Ardupilot documentation and code, which allows us to perform software-in-the-loop simulations of teams of UAVs embedded with actual autopilot protocols. An overview of realtime path planning, trajectory tracking and formation control resulting from the proposed platform is given. The software-in-the-loop simulations show the capability of achieving different UAV formations while handling uncertain mass and inertia.

@en

Heating, ventilation and air-conditioning (HVAC) units in buildings form a system-of-subsystems entity that must be accurately integrated and controlled by the building automation system to ensure the occupants' comfort with reduced energy consumption. As control of HVACs involves a standardized hierarchy of high-level set-point control and low-level Proportional-Integral-Derivative (PID) controls, there is a need for overcoming current control fragmentation without disrupting the standard hierarchy. In this work, we propose a model-based approach to achieve these goals. In particular: The set-point control is based on a predictive HVAC thermal model, and aims at optimizing thermal comfort with reduced energy consumption; the standard low-level PID controllers are auto-tuned based on simulations of the HVAC thermal model, and aims at good tracking of the set points. One benefit of such control structure is that the PID dynamics are included in the predictive optimization: in this way, we are able to account for tracking transients, which are particularly useful if the HVAC is switched on and off depending on occupancy patterns. Experimental and simulation validation via a three-room test case at the Delft University of Technology shows the potential for a high degree of comfort while also reducing energy consumption.

@en

This paper establishes a novel adaptive hierarchical formation control method for uncertain heterogeneous nonlinear agents described by Euler–Lagrange (EL) dynamics. Formation control is framed as a synchronization problem where a distributed model reference adaptive control is used to synchronize the EL systems. The idea behind the proposed adaptive formation algorithm is that each agent must converge to the model defined by its hierarchically superior neighbors. Using a distributed inverse dynamics structure, we prove that distributed nonlinear matching conditions between connected agents hold, so that matching gains exist to make the entire formation converge to same homogeneous dynamics: to compensate for the presence of uncertainties, estimation laws are devised for such matching gains, leading to adaptive synchronization. An appropriately designed distributed Lyapunov function is used to derive asymptotic convergence of the synchronization error. The effectiveness of the proposed methodology is supported by simulations of a formation of Unmanned Aerial Vehicles (UAVs).

@en