Intervalometer (Slight Return)

van de Giesen, N.C.; de Villiers, D.J.; Hut, R.W.; Schleiss, M.A.; ten Veldhuis, J.A.E.

Intervalometer (Slight Return)

Poster (2019)

Authors

N.C. van de Giesen Water Resources -

D.J. de Villiers Water Resources -

R.W. Hut Water Resources -

M.A. Schleiss Atmospheric Remote Sensing -

J.A.E. ten Veldhuis Water Resources -

Research Group

Water Resources () (TU Delft)

To reference this document use:

http://resolver.tudelft.nl/uuid:d27f7f21-2b35-4cb9-8640-a945f1183e1a

More Info

expand_more

Published Date

2019

Language

English

Reuse Rights

Other than for strictly personal use, it is not permitted to download, forward or distribute the text or part of it, without the consent of the author(s) and/or copyright holder(s), unless the work is under an open content license such as Creative Commons.

Faculty

Civil Engineering & Geosciences

Department

Water Management

Research Group

Water Resources

Abstract

An intervalometer is an extremely simple measurement device that measures the intervals between the impact of raindrops on a surface. In our case, we used a piezo-electric element put in a small 3D-printed holder. When a raindrop hits the surface, a voltage is generated that is detected by a simple CPU, such as that of an Arduino. A softwarr-based signal filter is applied to filter out frequencies that are too far removed from the Eigenfrequency of the element. Once an impact is detected, a transistor shorts out the the piezo, after which it is ready for the next drop. It takes about 20 ms to register a drop. The design follows the open hardware philosophy and all codes, including those for 3D printing, can be found at https://github.com/nvandegiesen/Intervalometer/wiki/Intervalometer.

The intervalometer has been tested under different climatic conditions. The main focus here is on a campaign in Tanzania. It turned out that the intervalometer gives surprisingly consistent results and with some calibration, rainfall rates can be determined. Because the arrival rates are known in great detail, one can check to see if the Poisson assumption, underlying many rainfall models, is valid. For tropical Tanzania, it turned out that only under rare drizzle-like conditions does Poisson hold.