Passive acoustic sensing utilizes the ability of sound to travel beyond the line-of-sight to understand the surroundings. This provides an advantage over the currently used sensors in Intelligent Vehicles that can sense obstacles within their line-of-sight only. Recently, a localization based approach has been implemented to take advantage of this sensing modality to predict approaching vehicles behind the blind corner in an urban scenario. While this approach shows a lot of promise, there is a difficulty in integrating the multi-microphone system. Additionally, the system would be unable to differentiate between the nature of two sound sources. This motivates the exploration of a classification based approach which uses audio data from only a single microphone to identify the sound sources present in them. This thesis investigates the possibility of having such a system on the Intelligent Vehicle to predict approaching vehicles from behind the blind corners. A review of the literature revealed that techniques categorized under Sound Event Detection (SED) are suitable to implement a classification based approach. The prediction of the vehicle is treated as a binary classification problem and a Convolutional Recurrent Neural Network (CRNN) is used as the acoustic model to detect the presence of an approaching car in the audio sample represented by Log Mel Spectrogram features. Additionally, domain adaptation techniques were implemented to explore the possibility
of improving the system performance with limited data collected while the ego-vehicle is driving. Experiments carried out indicate that when the ego-vehicle is static, the system performs well with the approaching vehicle predicted 1.4s before it is in line-of-sight and a balanced accuracy of 86.9% achieved for the classification task. However, the system achieved an accuracy of 68% on the samples recorded while the ego-vehicle was driving. Further experiments indicate that the acoustic model cannot generalize well to unseen situations in most cases and experiment with domain adaptation did not show
any improvement in performance.

Simultaneous Localization And Mapping (SLAM) algorithms provide accurate localization for autonomous vehicles and provide essential information for the path planning module. However, SLAM algorithms as- sume a static environment in order to estimate a location. This assumption influences the pose estimation in dynamic urban environments. The impact of this assumption on day-to-day scenarios of an intelligent vehicle is unknown. A deeper understanding on the effect of dynamic scenarios in an urban environment could lead to simple and robust solutions for SLAM algorithms in intelligent vehicles. The objective of this research is to develop a methodology that isolates the effect of an urban dynamic environment on the per- formance of a SLAM algorithm. This requires constant environment conditions including constant weather conditions, lighting conditions and identical trajectories over time. The methodology is tested with a stereo feature based V-SLAM algorithm called ORB SLAM [19], which illustrates the in-depth analysis that is possi- ble with this experiment. The main research question is: How does a dynamic urban environment influence the pose estimation accuracy of stereo ORB SLAM? Two specific dynamic scenarios are designed to represent a dynamic urban environment: driving behind another vehicle and vehicles approaching on the other side of the road. On these scenarios, an in-depth anal- ysis of ORB SLAM is performed to observe how the algorithm’s design influences the robustness to a dynamic environment. Functions within the algorithm are bypassed to analyze the effect on the performance. Specifi- cally, the place recognition function and map point filtering function are bypassed. The analysis proofs which functions assist in the overall robustness to a dynamic environment. Moreover, an analysis is performed of the algorithm in localization mode to research the effect of utilizing maps that were created under different conditions. The knowledge gained from the full analysis can be utilized to improve other V-SLAM algorithms. The experiment is performed in CARLA [6], an open source simulator. CARLA provides an elaborate sen- sor suite which support multiple camera setups and LIDAR sensors. Furthermore, the simulator provides free maps which represent realistic urban environments and allows for easy and accurate access to the ground truth position. A setup is designed with the simulator that allows complete isolation of the effect of a dy- namic environment. The setup allows full control of lighting conditions, weather conditions and allows iden- tical trajectories over time in different dynamic scenarios. Each scenario is simulated over several different trajectories in which the camera images are converted to rosbags. Each variation of the ORB SLAM algorithm is tested on the produced rosbags. The resulting pose estimations in dynamic conditions are compared to the pose estimations made during static conditions to analyze the effect of dynamic scenarios on the perfor- mance of the algorithm. The method successfully isolated the effect of a dynamic environment on the performance of stereo ORB SLAM. It allows for a detailed analysis which aids in finding the source of performance differences. In general, stereo ORB SLAM displays robust behavior to a dynamic environment. The experiment shows that the algo- rithm is sensitive to false relocalization when the stereo camera setup is driving 10 meters behind another vehicle for a long period of time. During these conditions, ORB SLAM cannot provide accurate pose esti- mations even when the place recognition module is deactivated. Furthermore, the map point filtering does increase the robustness in certain dynamic scenarios. Finally, the data suggests that utilizing maps created in different conditions does influence the pose estimation in localization mode. However, more data is needed to confirm these results. The methodology has proven its value for in depth analysis of robustness to an urban dynamic environ- ment for a SLAM algorithm. This experiment is not limited to ORB SLAM but could be utilized for other monocular and stereo V-SLAM methods, as well as LIDAR based methods. New solutions can be developed to increase robustness to a dynamic environment and tested on the same rosbags. This methodology could be an important tool for the development SLAM algorithms for intelligent vehicles.

New measures have to be taken to combat fatalities caused by traffic accidents. Intelligent vehicles have the potential to increase safety, but depend heavily on their automated perception ability.
Acoustic perception, an unused sensing modality in this field, has potential for the detection of nearby vehicles, an ability both human drivers and autonomous vehicles could use assistance with. In this thesis two existing datasets, AudioSet a large general purpose dataset and RoadCube a small dedicated vehicle recognition set, are evaluated. Furthermore commonly used acoustic features and classifier algorithm are evaluated. Special attention is given to the influence of a moving listener vehicle on the performance. For the evaluation a new dataset, DriveSound, is captured. It contains samples captured from a listener car, both when its moving or idle. Results show that RoadCube can be used for the detection of road vehicles, but only when the listener is idle. The best performing classifier from RoadCube, a Gaussian Mixture Model classifier surpassed classifiers trained on the evaluation dataset itself with a Matthews Correlation Coefficient (MCC) of 0.34. None of the classifiers performed well on the samples captured by a moving listener, except for the DriveSound-driving classifiers. The Support Vector Machine trained on this dataset attained a MCC of 0.56.