Periodic wakes are created on upstream wind turbines by pitching strategies, such as the Helix approach, to enhance wake mixing and thereby increase power production for wind turbines directly in their wake. Consequently, a cyclic load is not only generated on the actuating turbine’s blades but also on the waked wind turbine. While the upstream load is the result of the pitching required for wake mixing, the downstream load originates from interaction with the periodic wake and only causes fatigue damage. This study proposes two novel individual pitch control schemes in which such a periodic load on the downstream turbine can be treated: by attenuation or amplification. The former method improves the fatigue life of the downstream turbine, whereas the latter enhances wake mixing further downstream by exploiting the already-present periodic content in the wake; both were validated on a three-turbine wind farm in high-fidelity large-eddy simulations. Fatigue damage reductions of around 10% were found in the load mitigation case, while an additional power enhancement of 6% was generated on the third turbine when implementing the amplification strategy. Both objectives can easily be toggled depending on a wind farm operator’s demands and the desired loads/energy capture tradeoff.

@en

To justify the use of two single-input single-output (SISO) control loops instead of more complex multi-input multi-output (MIMO) control, the axes in a wind turbine's pitch control system should be fully decoupled using the multi-blade coordinate transform. To achieve that, usually, an azimuth offset is required, correcting for phase lags originating from, e.g., actuator delays and blade flexibility. In wind turbine simulations, this parameter is commonly obtained by analysis of the linearized turbine models. This work, however, demonstrates that analyzing linearized turbine models is not sufficient for correcting the full phase lag when coupling wind turbine simulation tools to large-eddy simulators (LES), since additional phase lags may arise. Instead, this work proposes deriving the azimuth offset using data-driven modelling directly in coupled LES, where data is generated by exciting the structure with pseudo-random binary noise. Using this approach it was found that the optimal azimuth offset is three degrees higher than when using the linearized model, which demonstrates that deriving the optimal azimuth offset from linearized models is not suitable for coupled simulations.

@en

As wind turbine power capacities continue to rise, taller and more flexible tower designs are needed for support. These designs often have the tower's natural frequency in the turbine's operating regime, increasing the risk of resonance excitation and fatigue damage. Advanced load-reducing control methods are needed to enable flexible tower designs that consider the complex dynamics of flexible turbine towers during partial-load operation. This article proposes a novel modulation-demodulation control (MDC) strategy for side-side tower load reduction driven by the varying speed of the turbine. The MDC method demodulates the periodic content at the once-per-revolution (1P) frequency in the tower motion measurements into two orthogonal channels. The proposed scheme extends the conventional tower controller by augmentation of the MDC contribution to the generator torque signal. A linear analysis framework into the multivariable system in the demodulated domain reveals varying degrees of coupling at different rotational speeds and a gain sign flip. As a solution, a decoupling strategy has been developed, which simplifies the controller design process and allows for a straightforward (but highly effective) diagonal linear time-invariant (LTI) controller design. The high-fidelity OpenFAST wind turbine software evaluates the proposed controller scheme, demonstrating effective reduction of the 1P periodic loading and the tower's natural frequency excitation in the side-side tower motion.

@en

Advancements in wind turbine technology have made wind energy more cost-competitive. While taller towers use less material, they are more susceptible to fatigue. This study introduces a convex model predictive control scheme to actively counteract side-side periodic loads using a velocity-based approach, which captures the system's nonlinear behavior without requiring extensive prior operating points. A quasi-linear parameter-varying dynamic model for wind turbine towers is established through model demodulation transformation. Simulation results show a 96% reduction in net force in the side-side direction at the tower top under turbulent wind conditions.

@en

On-shore horizontal-axis wind turbines (HAWTs) provide a cost-effective solution for low carbon electricity generation. However, public acceptance is still a problem. A possible alternative to a HAWT is a vertical-axis wind turbine (VAWT), which is more visually appealing and less noisy. Furthermore, the inherent omni-directionality of VAWTs makes them suitable for installation in urban environments where the turbulence levels are high, and the wind direction variations are significant. However, the variation with the azimuth angle of the blade-effective wind speed and the angle of attack makes VAWT performance difficult to predict. This study proposes a wind speed estimator for a VAWT to address this challenge and to exploit knowledge of the blade-effective wind speed for load reduction control strategies. An Unscented Kalman Filter is used to solve the blade-effective wind speed estimation problem and is applied to a realistic 1.5 m two-bladed H-Darrieus VAWT model, for which the aerodynamic characteristics are determined using an actuator cylinder model. The system performance is evaluated using different wind speed variation scenarios. Overall, good agreement between the reference and estimated blade-effective wind speed is found both in terms of trend and absolute values.

@en

Economic model predictive control (EMPC) has received increasing attention in the wind energy community due to its ability to trade-off economic objectives with ease. However, for wind turbine applications, inherent nonlinearities, such as from aerodynamics, pose difficulties in attaining a convex optimal control problem (OCP), by which real-time deployment is not only possible but also a globally optimal solution is guaranteed. A variable transformation can be utilized to obtain a convex OCP, where nominal variables, such as rotational speed, pitch angle, and torque, are exchanged with an alternative set in terms of power and energy. The ensuing convex EMPC (CEMPC) possesses linear dynamics, convex constraints, and concave economic objectives and has been successfully employed to address power control and tower fatigue alleviation. This work focuses on extending the blade loads mitigation aspect of the CEMPC framework by exploiting its individual pitch control (IPC) capabilities, resulting in a novel CEMPC-IPC technique. This extension is made possible by reformulating static blade and rotor moments in terms of individual blade aerodynamic powers and rotational kinetic energy of the drivetrain. The effectiveness of the proposed method is showcased in a mid-fidelity wind turbine simulation environment in various wind cases, in which comparisons with a basic CEMPC without load mitigation capability and a baseline IPC are made.

@en

Wind farm controllers such as the Helix approach have shown potential in increasing plant power production through wake mixing. The concept suggests that actuating the upstream turbines' blade pitching with a specific periodic signal can induce a helix-shaped wake, thereby alleviating wind velocity deficit on downstream turbines. Wake mixing initiation by downstream turbines may also be shown advantageous for power production; however, little to no attention has been given to such an approach. Similar wake mixing is expected to be achievable at lower control costs if the downstream turbine can benefit from the periodic component already present in the wake of the upstream turbine. Such a hypothesis is studied in this work by designing a minimal control scheme where the wake acting on the downstream turbine is simulated by a periodic input disturbance. A Kalman filter is proposed for incoming input disturbance phase estimation using SCADA data. The reconstructed phase information allows synchronization of the downstream control action with the periodic input disturbance by means of a phase synchronization wake mixing controller. The periodic component was estimated with a minimal root-mean-square error and the resulting control action was in phase with the input disturbance and demonstrated satisfactory performance even with a small phase perturbation. Future work will include applications in a high-fidelity wind turbine model and wind tunnel studies.

@en

The Immersion and Invariance (II) wind speed estimator is a powerful and widely-used technique to estimate the rotor effective wind speed on horizontal axis wind turbines. Anyway, its global convergence proof is rather cumbersome, which hinders the extension of the method and proof to time-delayed and/or uncertain systems. In this letter, we illustrate that the circle criterion can be used as an alternative method to prove the global convergence of the II estimator. This also opens up the inclusion of time-delays and uncertainties. First, we demonstrate that the II wind speed estimator is equivalent to a torque balance estimator with a proportional correction term. As the nonlinearity in the estimator is sector bounded, the well-known circle criterion is applied to the estimator to guarantee its global convergence for time-delayed systems. By looking at the theoretical framework from this new perspective, this letter further proposes the addition of an integrator to the correction term to improve the estimator performance. Case studies show that the proposed estimator with an additional integral correction term is effective at wind speed estimation. Furthermore, its global convergence can be guaranteed by the circle criterion for time-delayed systems.

@en

The estimation of the rotor effective wind speed is used in modern wind turbines to provide advanced power and load control capabilities. However, with the ever increasing rotor sizes, the wind field over the rotor surface shows a higher degree of spatial variation. A single effective wind speed estimation therefore limits the attainable levels of load mitigation, and the estimation of the blade effective wind speed (BEWS) might present opportunities for improved load control. This letter introduces two novel BEWS estimator approaches: a proportional-integral-notch (PIN) estimator based on individual blade load measurements, and a Coleman estimator targeting the estimation in the nonrotating frame. Given the seeming disparities between these two estimators, the objective of this letter is to analyze the similarities between the approaches. It is shown that the PIN estimator, which is equivalent to the diagonal form of the Coleman estimator, is a simple but effective method to estimate the BEWS. The Coleman estimator, which takes the coupling effects between individual blades into account, shows a more well-behaved transient response than the PIN estimator.

@en

The wind turbine side-side tower motion is known to be lightly damped. One viable active damping solution is realized by deploying individual pitch control (IPC) such that counteracting blade forces are created to alleviate the tower fatigue loading caused by this motion. Existing IPC methods for side-side tower damping in the literature, such as linear quadratic regulator and lead-lag controller, cannot accommodate direct optimization and tradeoff tunings of the wind turbine economic performance. In this work, a novel side-side tower damping IPC strategy under a convex economic model predictive control (CEMPC) framework is therefore developed to address these challenges. The main idea of the framework lies in the variable transformation in power and energy terms to obtain linear dynamics and convex constraints, over which the economic performance of the wind turbine is maximized with a globally optimal solution in a receding horizon manner. The effectiveness of the proposed method is showcased in a high-fidelity simulation environment under both steady and turbulent wind cases. Lower fatigue damage on the side-side tower bending moment is attained with an acceptable level of pitch activities, negligible impact on the blade loads, and minor improvement on the power production.

@en

The current trend in the evolution of wind turbines is to increase their rotor size in order to capture more power. This leads to taller, slender and more flexible towers, which thus experience higher dynamical loads due to the turbine rotation and environmental factors. It is hence compelling to deploy advanced control methods that can dynamically counteract such loads, especially at tower positions that are more prone to develop cracks or corrosion damages. Still, to the best of the authors’ knowledge, little to no attention has been paid in the literature to load mitigation at multiple tower locations. Furthermore, there is a need for control schemes that can balance load reduction with optimization of power production. In this paper, we develop an Economic Model Predictive Control (eMPC) framework to address such needs. First, we develop a linear modal model to account for the tower flexural dynamics. Then we incorporate it into an eMPC framework, where the dynamics of the turbine rotation are expressed in energy terms. This allows us to obtain a convex formulation, that is computationally attractive. Our control law is designed to avoid the "turn-pike" behavior and guarantee recursive feasibility. We demonstrate the performance of the proposed controller on a 5MW reference WT model: the results illustrate that the proposed controller is able to reduce the tower loads at multiple locations, without significant effects to the generated power.@en

The ever-increasing power capacities of wind turbines promote the use of tall and slender turbine towers. This poses a challenge from a fatigue loading perspective by the relocation of the first and lightly-damped tower side-side natural frequency into the turbine operating regime, promoting its excitation during nominal operation. The excitation of this resonance can be aggravated by periodic loading in the presence of rotor mass and/or aerodynamic imbalance. Earlier work already presented a method to prevent the side-side excitation using a combination of model demodulation and quasilinear parameter varying model predictive control techniques. However, the method does not incorporate features for active control for side-side load mitigations. Because the information of the beforementioned periodic side-side loading is unknown and unmeasurable in practical scenarios, this paper presents a Kalman filtering method for its estimation in a demodulated fashion. The Kalman filter employs an extended demodulated wind turbine model augmented with random walk models of the periodic load. The simulation result demonstrates the effectiveness of the proposed method in estimating the periodic load components along with unmeasurable tower states in their demodulated form. These estimates pose an opportunity for use in future advanced controller designs for active load reductions.@en

Modern wind turbine control algorithms typically utilize rotor effective wind speed measured from an anemometer on the turbine’s nacelle. Unfortunately, the measured wind speed from such a single measurement point does not give a good representation of the effective wind speed over the blades, as it does not take the varying wind condition within the entire rotor area into account. As such, Blade Effective Wind Speed (BEWS) estimation can be seen as a more accurate alternative. This paper introduces a novel Subspace Predictive Repetitive Estimator (SPRE) approach to estimate the BEWS using blade load measurements. In detail, the azimuth-dependent cone coefficient is firstly formulated to describe the mapping between the out-of-plane blade root bending moment and the wind speed over blades. Then, the SPRE scheme, which is inspired by Subspace Predictive Repetitive Control (SPRC), is proposed to estimate the BEWS. Case studies exhibit the proposed method’s effectiveness at predicting BEWS and identifying wind shear in varying wind speed conditions. Moreover, this novel technique enables complicated wind inflow conditions, where a rotor is impinged and overlapped by wake shed from an upstream turbine, to be estimated.@en

With the trend of increasing wind turbine rotor diameters, the mitigation of blade fatigue loadings is of special interest to extend the turbine lifetime. Fatigue load reductions can be partly accomplished using individual pitch control (IPC), and is commonly facilitated by the so-called multiblade coordinate (MBC) transformation. This operation transforms and decouples the blade load signals in a non-rotating yaw-axis and tilt-axis. However, in practical scenarios, the resulting transformed system still shows coupling between the axes. To cope with this phenomenon, earlier research has shown that the introduction of an additional MBC tuning variable-the azimuth offset-decouples the multivariable system. However, the introduction of this extra variable complicates the controller design process, and requires expert knowledge and specialized analysis software. To provide an efficient method for the optimization of fixed-structure IPC controllers, based on black box and computationally costly objective functions, this paper considers a Bayesian optimization controller tuning framework. Results show the efficiency of the framework to tune a combined 1P + 2P IPC implementation, without prior knowledge, and based on high-fidelity simulation results using a computationally expensive objective function.

@en