Synthetic fibre-reinforced polymer composites (FRPs) have long been favored in structural engineering for their exceptional mechanical properties. However, their environmental impact due to energy intensive manufacturing, and disposal has prompted exploration into sustainable biobased alternatives such as flax FRP composites (FFRPs). While using flax fibres as composite reinforcement has lightness and damping benefits from a structural point of view, it also introduces design challenges as the complex microstructure of flax fibres and flax FRPs induces a more viscoelastic fatigue response. Therefore, prestraining and pre-creeping are proposed in this study as simple methods to improve fatigue performance by taking advantage of alignment mechanisms intrinsic to flax fibre and yarn microstructure. An experimental campaign was conducted on [0/90/0]S flax FRP laminates (hence, predominantly UD) to compare the tension-tension fatigue performance of reference specimens to pre-strained and pre-creeped specimens. It was observed that pre-straining and especially pre-creeping are effective at improving FFRPs fatigue performance with significant increase in fatigue life, increase in dynamic modulus, and decrease in accumulation of deformation (ratcheting).@en

Biobased fibre-reinforced polymer (FRP) composites, consisting of natural lignocellulosic fibres such as flax or hemp, are great alternatives to synthetic fibres to mitigate the environmental impact of high-performance composites in engineering structures. Natural fibres such as flax have damping and specific mechanical properties suitable to potentially replace glass fibres in FRP composites in engineering structures. However, structural design with flax FRPs can be challenging for engineers due to their rather peculiar mechanical responses thanks to the complex multi-scale microstructure of the flax fibres. In particular, flax FRP composites have shown large ratcheting (accumulation of plastic deformation) and stiffness increase when subjected to tensile fatigue loading. Therefore, this paper proposes a novel yet simple 'pre-straining' method as a promising strategy for improving the fatigue response of flax FRP, to potentially replace synthetic glass FRP in various engineering structures. To this end, cross-ply flax, and glass FRP composite laminates were manufactured and subsequently tensile-tensile fatigue experiments were performed. It was observed that pre-straining of flax FRP composite coupons can improve their mechanical performance by increasing stiffness and reducing ratcheting during fatigue which is attributed to further alignment of the fibres within the twisted yarns, as well as possible microfibril alignment. The pre-straining of glass fibre reinforced composites samples did not lead to any remarkable reduction in ratcheting nor increase in stiffness. @en

The development of bio-based fibre-reinforced polymer composites (FPRs) has accelerated in recent years aiming at replacing synthetic FRPs in primary structures. Comparative case studies on biobased fibres (such as flax and hemp) indicate their potential to replace synthetic glass and carbon fibres in certain FRP structures as more sustainable and environmentally friendly alternatives. In those studies, the effects of in-situ hygrothermal conditions on the physical and mechanical performance of the natural fibre composites were generally overlooked, however, due to hygroscopicity of lignocellulosic natural fibres, flax fibre composites mechanical response is sensitive to its environmental temperature and relative humidity. To quantify and understand the effects of in-situ hygrothermal conditions on flax FRP composite, a quasi-static tensile testing campaign was conducted at various temperatures and relative humidities. Glass and flax FRP laminates were tested in cross-ply and angle-ply configurations. It was observed that the strength and stiffness of cross-ply and angle-ply FFRP laminates were significantly affected by relative humidity contrary to GFRP counterparts. All laminates exhibited strength and/or stiffness variation with temperature that can be attributed to the sensitivity of the common epoxy matrix. However, a distinct difference was observed between the flax and glass cross-ply laminates with the modulus of the flax FRP being highly affected by temperature and relative humidity while the glass FRP modulus was unaffected.@en

Biobased fibre reinforced polymer (FRP) composites, consisting of natural lignocellulosic fibres such as flax or hemp, are great alternatives to synthetic fibres with the potential of reducing the environmental impact, particularly regarding the recyclability of high-performance engineering structures. Natural fibres such as flax have damping and specific mechanical properties suitable to potentially replace glass fibres in FRP composites. However, the hygroscopicity in natural fibres raises durability questions for structures subjected to (diurnal and seasonal) environmental changes such as wind turbine blades. Existing research on flax FRPs describes on one hand damages related to hygrothermal ageing and on the other hand damage related to fatigue but the interaction of hygrothermal effect with mechanical ageing such as fatigue is not yet understood. A concept is proposed to relate the hygrothermal fatigue behaviour of biobased FRP composites to their fatigue behaviour in standard laboratory air conditions, using damage analysis comprised of permanent strains and stiffness variations measurements, as well as visual macro and micro damage inspections, to enable the development of a mechanism based lifetime predictions model. @en