Enhancing Fatigue Performance Of Structural Biocomposites By Pre-Straining And Pre-Creeping Methods

Abstract

Synthetic fibre-reinforced polymer composites (FRPs) have long been favored in structural engineering for their exceptional mechanical properties. However, their environmental impact due to energy intensive manufacturing, and disposal has prompted exploration into sustainable biobased alternatives such as flax FRP composites (FFRPs). While using flax fibres as composite reinforcement has lightness and damping benefits from a structural point of view, it also introduces design challenges as the complex microstructure of flax fibres and flax FRPs induces a more viscoelastic fatigue response. Therefore, prestraining and pre-creeping are proposed in this study as simple methods to improve fatigue performance by taking advantage of alignment mechanisms intrinsic to flax fibre and yarn microstructure. An experimental campaign was conducted on [0/90/0]S flax FRP laminates (hence, predominantly UD) to compare the tension-tension fatigue performance of reference specimens to pre-strained and pre-creeped specimens. It was observed that pre-straining and especially pre-creeping are effective at improving FFRPs fatigue performance with significant increase in fatigue life, increase in dynamic modulus, and decrease in accumulation of deformation (ratcheting).