To improve access to electricity, decentralized, solar-based off-grid solutions like Solar Home Systems (SHSs) and rural micro-grids have recently seen a prolific growth. However, electrical load profiles, usually the first step in determining the electrical sizing of off-grid energy systems, are often non-existent or unreliable, especially when looking at the hitherto un(der)-electrified communities. This paper aims to construct load profiles at the household level for each tier of electricity access as set forth by the multi-tier framework (MTF) for measuring household electricity access. The loads comprise dedicated off-grid appliances, including the so-called super-efficient ones that are increasingly being used by SHSs, reflecting the off-grid appliance market’s remarkable evolution in terms of efficiency and price. This study culminated in devising a stochastic, bottom-up load profile construction methodology with sample load profiles constructed for each tier of the MTF. The methodology exhibits several advantages like scalability and adaptability for specific regions and communities based on community-specific measured or desired electricity usage data. The resulting load profiles for different tiers shed significant light on the technical design directions that current and future off-grid systems must take to satisfy the growing energy demands of the un(der)-electrified regions. Finally, a constructed load profile was also compared with a measured load profile from an SHS active in the field in Rwanda, demonstrating the usability of the methodology.

@en

Nearly 840 million people still lack access to electricity, while over a billion more have an unreliable electricity connection. In this article, the three different electrification pathways-grid extension, centralized microgrids, and standalone solar-based solutions, such as pico-solar and solar home systems (SHS)-are critically examined while understanding their relative merits and demerits. Grid extension can provide broad scale access at low levelized costs but requires a certain electricity demand threshold and population density to justify investments. To a lesser extent, centralized (off-grid) microgrids also require a minimum demand threshold and knowledge of the electricity demand. Solar-based solutions are the main focus in terms of off-grid electrification in this article, given the equatorial/tropical latitudes of the un(der-)electrified regions. In recent times, decentralized solar-based off-grid solutions, such as pico-solar and SHS, have shown the highest adoption rates and promising impetus with respect to basic lighting and electricity for powering small appliances. However, the burning question is-from lighting a million to empowering a billion-can solar home systems get us there?The two main roadblocks for SHS are discussed, and the requirements from the ideal electrification pathway are introduced. A bottom-up, interconnected SHS-based electrification pathway is proposed as the missing link among the present electrification pathways.

@en

The original publication’s Fig. 5 image lacks some of its labels. On the top right, the label for the solid black line is BCF^ while the label of the broken blue line is BCF^. The correct label for the solid black line should be BCfmin^ while the broken blue line should be BCF = 1^. Figure 5 image with the wrong label (top image) and with the correct label (bottom image) is shown here. The original publication was corrected.(Figure Presented.).

@en

Off-grid solar home systems (SHSs) currently constitute a major source of providing basic electricity needs in un(der)-electrified regions of the world, with around 73 million households having benefited from off-grid solar solutions by 2017. However, in and of itself, state-of-the-art SHSs can only provide electricity access with adequate power supply availability up to tier 2, and to some extent, tier 3 levels of the Multi-tier Framework (MTF) for measuring household electricity access. When considering system metrics of loss of load probability (LLP) and battery size, meeting the electricity needs of tiers 4 and 5 is untenable through SHSs alone. Alternatively, a bottom-up microgrid composed of interconnected SHSs is proposed. Such an approach can enable the so-called climb up the rural electrification ladder. The impact of the microgrid size on the system metrics like LLP and energy deficit is evaluated. Finally, it is found that the interconnected SHS-based microgrid can provide more than 40% and 30% gains in battery sizing for the same LLP level as compared to the standalone SHSs sizes for tiers 4 and 5 of the MTF, respectively, thus quantifying the definite gains of an SHS-based microgrid over standalone SHSs. This study paves the way for visualizing SHS-based rural DC microgrids that can not only enable electricity access to the higher tiers of the MTF with lower battery storage needs but also make use of existing SHS infrastructure, thus enabling a technologically easy climb up the rural electrification ladder.

@en

The use of batteries is indispensable in stand-alone photovoltaic (PV) systems, and the physical integration of a battery pack and a PV panel in one device enables this concept while easing the installation and system scaling. However, the influence of high temperatures is one of the main challenges of placing a solar panel close to a battery pack. Therefore, this paper aims to select a suitable battery technology considering the temperature of operation and the expected current profiles. The methodology for battery selection is composed of a literature review, an integrated model, the design of an application-based testing, and the execution of the aging test. The integrated model was employed to choose among the battery technologies, and to design a testing procedure that simulated the operational conditions of the PV-battery Integrated Module (PBIM). Two Li-ion pouch cells were tested at two representative temperatures while applying various charging/discharging profiles. After the testing, the LiFePO4 (LFP) cells showed better performance when compared to LiCoO2 batteries (LCO), where for instance, the LCO cells capacity tested at 45∘C, faded 2,45% more than the LFP cells at the same testing conditions. Therefore, LFP cells are selected as a suitable option to be part of the PBIM.@en

With almost 1.1 billion people lacking access to electricity, solar-based off-grid products like Solar Home Systems (SHS) have become a promising solution to provide basic electricity needs in un(der)-electrified regions. Therefore, optimal system sizing is a vital task as both oversizing and undersizing a system can be detrimental to system cost and power availability, respectively. This paper presents an optimal SHS sizing methodology that minimizes the loss of load probability (LLP), excess energy dump, and battery size while maximizing the battery lifetime. A genetic algorithm-based multi-objective optimization approach is utilized to evaluate the optimal SHS sizes. The potential for SHS to cater to every tier of the Multi-tier framework (MTF) for measuring household electricity access is examined. The optimal system sizes for standalone SHS are found for different LLP thresholds. Results show that beyond tier 2, the present day SHS sizing needs to be expanded significantly to meet the load demand. Additionally, it is deemed untenable to meet the electricity needs of the higher tiers of MTF purely through standalone SHS without compromising one or more of the system metrics. A way forward is proposed to take the SHS concept all the way up the energy ladder such that load demand can also be satisfied at tier 4 and 5 levels.

@en

Almost a billion people globally lack access to electricity. For various reasons, grid extension is not an immediately viable solution for the un(der-) electrified communities. As most of these electricity-starved regions lie in tropical latitudes, the use of off-grid solar-based solutions like solar home systems (SHS) is a logical approach. However, state-of-the-art SHS is limited in its power levels and availability. Moreover, sub-optimal system sizing leads to either over-utilization --- and therefore, faster degradation --- of the SHS battery, or under-utilization of the SHS battery, leading to higher system costs. Additionally, off-grid SHS designs suffer from a lack of reliable load profile data needed as the first step for an off-grid photovoltaic (PV) system (e.g., SHS) design. The work undertaken in this dissertation aims to analyze the technological limits and opportunities of using SHS in terms of power level, availability, and battery size, lifetime for achieving universal electrification. Firstly, the three main electrification pathways, viz., grid extension, centralized microgrids, and standalone solar-based solutions like pico-solar and SHS are analyzed for their relative merits and demerits. Then, a methodology is presented to quantify the electricity demand of the households in the form of load profiles for the various tiers of electricity access as outlined by the multi-tier framework (MTF) for measuring the household electricity access. Secondly, for the SHS application, a non-empirical battery lifetime estimation methodology is presented that can be used at the design phase of SHS for comparing the performance of candidate battery choices at hand in the form of battery lifetime. Thirdly, an optimal standalone system size is evaluated for each tier of electrification, taking into account the battery lifetime, temperature impact on SHS performance, power supply availability in terms of the loss of load probability (LLP), and excess PV energy. A genetic algorithm-based multi-objective optimization is performed, giving insights on the delicate interdependencies of the various system metrics like LLP, excess energy, and battery lifetime on the SHS sizing. This exercise concludes that meeting the electricity requirements of tiers 4 and 5 level of electrification is untenable through SHS alone. Consequently, a bottom-up DC microgrid born out of the interconnection of SHS is explored. A modular and scalable architecture for such a bottom-up, interconnected SHS-based architecture is introduced, and the benefits of the microgrid over standalone SHS are quantified in terms of lower battery sizes and the defined system metrics. On modeling the energy sharing between the SHS, it is shown that battery sizing gains of more than 40% could be achieved with inter-connectivity at tier 5 level as compared to standalone SHS to meet the same power availability threshold. Finally, a Geo-Information System (GIS)-based methodology is presented that takes into account the spatial spread of the households while utilizing graph theory-based approaches to arrive at the optimal microgrid topology in terms of network length. The research carried out in this dissertation underlines the technological limitations of SHS in aiming towards universal electrification, while highlighting the benefits of moving towards a bottom-up approach in building (rural) DC microgrids through SHS, which can enable the climb up the so-called electrification ladder. @en

Solar Home Systems (SHS) have proven to be an effective means to tackle the global energy poverty that still affects around 1 billion people. However, present-day SHS (which are standalone systems with usually a purely dc architecture) have a limited power rating (usually up to 100 Wp). To enable higher power levels of electricity access in an economically viable way, energy sharing between these individual SHS through interconnectivity is a logical progression. The interconnectivity has to be implemented at a higher voltage level in order to reduce the conduction losses and cable costs. Existing control schemes do not take into account the multi-voltage dc microgrids. In this paper, the state of charge (SOC) balancing in such an interconnected SHS-based dc microgrid is addressed. In particular, the adaptive droop-based SOC control is extended for multiple voltage levels in a dc microgrid without any means of active communication. This is achieved through the creation of a voltage dead-band, SOC-based droop resistances, and the use of voltage ratios in dc-dc converters.

@en

Given the complementary nature of photovoltaic (PV) generation and energy storage, the combination of a solar panel and a battery pack in one single device is proposed. To realize this concept, the PV Battery-Integrated Module (PBIM), it is fundamental to analyze the system architecture and energy management. This paper focuses on selecting a suitable architecture among the different options, while also indicating the control strategy that the converters must follow to ensure appropriate performance. Also, several modes of operation for the complete system are introduced to implement energy management. For the selected DC architecture, two case studies, viz. off-grid and peak-shaving for a grid-tied system, were employed to characterize the response of the model demonstrating its utility to perform maximum power-point tracking, excess solar power curtailment, and battery charging and discharging. The proposed control and system architecture prove to be feasible for a PV battery-integrated device such as PBIM.@en

The fluctuating nature of solar power generation makes the coupling of energy storage and solar energy inevitable. This paper explores the integration of all the typical components of a PV-battery system in one single module, introducing a prototype of the so-called PV-Battery Integrated Module (PBIM).
The electrical and thermal performance of the prototype were studied in order to analyse its behaviour under severe testing conditions. The prototype exhibited an appropriate charging efficiency of 95.7% on average, while the battery pack operated safely (at less than 45◦C). When compared to a conventional system (battery and charge controller in a separated manner), the mean solar panel temperature of the prototype was 9.34% higher. However, in terms of power, the thermal losses in the PBIM resulted in an average increase of just 1.3 W (4.6%) in comparison to a conventional system. The testing validated the applicability of the integrated concept in harsh conditions, providing valuable information for future design improvements. @en

The past few years have seen strong growth of solar-based off-grid energy solutions such as Solar Home Systems (SHS) as a means to ameliorate the grave problem of energy poverty. Battery storage is an essential component of SHS. An accurate battery model can play a vital role in SHS design. Knowing the dynamic behaviour of the battery is important for the battery sizing and estimating the battery behaviour for the chosen application at the system design stage. In this paper, an accurate cell level dynamic battery model based on the electrical equivalent circuit is constructed for two battery technologies: the valve regulated lead-acid (VRLA) battery and the LiFePO₄ (LFP) battery. Series of experiments were performed to obtain the relevant model parameters. This model is built for low C-rate applications (lower than 0.5 C-rate) as expected in SHS. The model considers the non-linear relation between the state of charge (SOC) and open circuit voltage (V_OC) for both technologies. Additionally, the equivalent electrical circuit model for the VRLA battery was improved by including a 2nd order RC pair. The simulated model differs from the experimentally obtained result by less than 2%. This cell level battery model can be potentially scaled to battery pack level with flexible capacity, making the dynamic battery model a useful tool in SHS design.

@en

Solar road technology provides an opportunity to harvest the vast, albeit dispersed, photovoltaic (PV) energy, while maximizing the land utilization. Deriving experience from the pioneering 70-m solar bike path installed in the Netherlands, this paper highlights the operational challenges and performance parameters using the first-year measured data. The theoretically predicted energy yield is compared with the measured energy yield. Based on the best performing module, the benchmark annual energy yield is set to 85&#x2013;90&#x00A0;kWh/m<formula><tex>$^2$</tex></formula> specific to the installation site. It is shown that this value can be bettered by about 1.5 times if different cell technology such as monocrystalline is used. With different installation sites around the world, thermal behavior as well as annual energy yield changes. Theoretical proof is offered that it is not unreasonable to expect an annual energy yield in the upwards of 150&#x00A0;kWh/m<formula><tex>$^2$</tex></formula> with solar road energy harvesting technology. For example, the annual yield is found to be 213&#x00A0;kWh/m<formula><tex>$^2$</tex></formula> if the same model is simulated for a solar road PV installation in India, which increased further with the use of monocrystalline to almost 300&#x00A0;kWh/m<formula><tex>$^2$</tex></formula>.

@en

Due to the variable nature of the photovoltaic generation, energy storage is imperative, and the combination of both in one device is appealing for more efficient and easy‐to‐use devices. Among the myriads of proposed approaches, there are multiple challenges to overcome to make these solutions realistic alternatives to current systems. This paper classifies and identifies previous efforts to achieve integrated photovoltaic storage devices. Moreover, the gaps and future perspectives are analysed to give an overview of the field, paying attention to low‐power devices (<10 W) as well as high‐power devices (>10 W). We focus on devices that combine solar cells with supercapacitors or batteries, providing information about the structure, materials used, and performance. On the one hand, small power devices must concentrate on including power electronics to increase the efficiency of the system as well as ensuring a safe operation; likewise, more attention should be drawn to validate the feasibility of novel concepts by carrying out more realistic and standardised tests, including long‐term testing. On the other hand, high‐power devices must be researched thoroughly to evaluate the impact of high temperatures on energy storage and solar module ageing; furthermore, optimum system sizing is a relevant topic that deserves attention and its relation to modular solutions. This critical literature review serves as a guide to understand the characteristics of the approaches followed to integrate photovoltaic devices and storage in one device, shedding light on the improvements required to develop more robust products for a sustainable future. @en

The rapid increase in the adoption of Solar Home Systems (SHS) in recent times hopes to ameliorate the global problem of energy poverty. The battery is a vital but usually the most expensive part of an SHS; owing to the least lifetime among other SHS components, it is also the first to fail. Estimating battery lifetime is a critical task for SHS design. However, it is also a complex task due to the reliance on experimental data or modelling cell level electrochemical phenomena for specific battery technologies and application use-case. Another challenge is that the existing electrochemical models are not application-specific to Solar Home Systems. This paper presents a practical, non-empirical battery lifetime estimation methodology specific to the application and the available candidate battery choices. An application-specific SHS simulation is carried out, and the battery activity is analyzed. A practical dynamic battery lifetime estimation method is introduced, which captures the fading capacity of the battery dynamically through every micro-cycle. This method was compared with an overall non-empirical battery lifetime estimation method, and the dynamic lifetime estimation method was found to be more conservative but practical. Cyclic ageing of the battery was thus quantified and the relative lifetimes of 4 battery technologies are compared, viz. Lead-acid gel, Flooded lead-acid, Nickel-Cadmium (NiCd), and Lithium Iron Phosphate (LiFePO₄) battery. For the same SHS use-case, State-of-Health (SOH) estimations from an empirical model for LiFePO₄ is compared with those obtained from the described methodology, and the results are found to be within 2.8%. The relevance of this work in an SHS application is demonstrated through a delicate balance between battery sizing and lifetime. Based on the intended application and battery manufacturer's data, the practical methodology described in this paper can potentially help SHS designers in estimating battery lifetimes and therefore making optimal SHS design choices.

@en

Solar Home Systems (SHS) have recently gained prominence as the most promising solution for increasing energy access in remote, off-grid communities. However, the higher than standard testing conditions (STC) temperatures have a significant impact on the SHS components like PhotoVoltaic (PV) module and battery. A modeling methodology is described in this study for quantifying the temperature impact on SHS. For a particular location with high irradiation and temperatures and a given load profile, an SHS model was simulated, and the temperature-impact was analyzed on the performance and lifetime of the SHS components. Different PV module temperature estimation models were applied, and the corresponding dynamic PV outputs were compared. The nominal operating cell temperature (NOCT) model was found inadequate for estimating PV module temperatures under high irradiance conditions. The PV yield was found to be affected by almost 10% due to thermally induced losses. When different levels of temperature variations were considered, the battery lifetime was seen to be up to 33% less than that at 25 ° C. The modeling methodology presented in this paper can be used to include the thermal losses in SHS for rural electrification, which can further help accordingly in system sizing.

@en

The coupling of solar panels and energy storage is inevitable and especially pertinent in places with no access to the electricity grid. This combination must be modular, providing the opportunity to scale up the system if energy demand increases, but also easy to install and user-friendly. These requirements validate the PV-Battery Integrated Module (PBIM) as a potential solution for stand-Alone applications. In this paper, we assess the performance of directly integrating a battery system at the back of a PV panel in comparison to a typical solar home system (SHS) with all the components in a separated manner. The study is carried out using data from a community in the countryside of Stung Treng (Cambodia). First, the optimum battery size and PV panel rating were determined using the loss of load probability metric. Second, the extra PV power losses in the case of (PBIM) were calculated, finding that it is 2.16% less efficient than a normal SHS due to the poorer heat dissipation induced by integrating the converter and batteries at the back of the PV panel. Third, the battery capacity faded by 1% after a year of simulation. Although when compared to a typical SHS PBIM results in slightly higher system losses, the losses are moderated and their impact is minimum when considering the expected benefits derived from using PBIM in SHS. Therefore in this paper, we validate the feasibility of PBIM as a solution for standalone systems in developing countries.

@en

Solar Home Systems (SHS) have recently shown an abundant growth in the developing world, which has also largely improved the energy access situation for the un(der)-electrified. Battery storage is the most important component of the SHS, because of both its higher cost and lower lifetime compared to other SHS components. In this study, we show that the upfront battery cost is only half the picture, and that lifetime evaluation can be equally important. Four battery technologies are assessed for their techno-economic feasibility in the context of a given SHS application. The battery's upfront and replacement costs per technology are bundled together in the form of total energy costs, which gives a more realistic measure of the choice of battery size in the system design phase. The methodology presented here can be extended and applied to specific battery technologies and products, and other PV-battery applications in general.@en

Solar Home Systems (SHSs) can fulfil the basic energy needs of the globally unelectrified population. With costs as one of the biggest barriers for SHS uptake, optimizing the system size with energy needs is crucial. Where most solutions focus only on the present needs, this work also addresses the future energy needs. The methodology includes extensive mapping of the current electricity needs in rural Cambodia through data analysis on existing SHSs in the field. Additionally, a 2-month field research was carried out in Cambodia to assess the qualitative state of electricity usage and investigate the future (2021) energy needs. A data analysis was performed on 111 SHSs (100 Wp, 1200 Wh).
SHS users were found to have a mean energy consumption of 310 Wh/day, with σ = 159 Wh. Most energy was consumed at night. The field research showed a clear demand for more energy and more appliances. The appliances attached to SHS in the future will be more diverse in power consumption and usage duration, resulting in a wide variety of energy consumption and high power peaks, causing fast and deep battery discharges. Three load profiles are presented. Solutions are discussed that can be applied to ensure the SHSs fit with future energy needs.@en

The proliferation of Solar Home Systems (SHS) in recent times hopes to provide an alleviating solution to the global problem of energy poverty. Battery is usually the most expensive but important part of an SHS; it is also normally the first part to fail. Estimating the battery lifetime can help make informed system design choices, and it is therefore an important exercise for an SHS designer. Battery lifetime modelling is often a complex task requiring empirical data or reliance on modelling cell level electrochemical phenomena. This paper presents a simple battery lifetime estimation method specific to the application and candidate battery choices at hand. An SHS application specific simulation is carried out for a year and the effect of microcycles on the battery activity is analyzed. The concept of active Depth-of-Discharge (DOD) is introduced. Cyclic ageing of the battery is thus quantified and relative cycle lives of 2 battery technologies are compared. A delicate trade-off is demonstrated between battery sizing and lifetime. The described methodology is also compared with an empirical model and the lifetime results are found to be within 3.85%. The methodology described in this paper can potentially help SHS designers in making quick, reasonable estimations of battery lifetimes based on the intended application and battery manufacturer's data.@en

The paper provides a comparison of four PV-battery architectures with dc and ac backbones, in terms of autarky, energy efficiency, battery size and reduction of annual electricity cost. The comparison is conducted based on the residential load and irradiation data from the Netherlands. The effect of different PV generation is also analyzed by comparing the results with irradiation data from Costa Rica. The results show that the ac coupled architecture gives the best performance.@en