Distillation remains the leading and most frequently adopted technique for the separation and purification of condensable mixtures in numerous industries. However, the inherently poor thermal efficiency of distillation requires a large amount of thermal energy, making it the chief factor in total process energy usage and a significant emitter of carbon dioxide due to the combustion of fossil fuels. To address this issue, electrification has arisen as a popular approach to reduce carbon emissions in different processes by primarily replacing the energy source with electricity derived from renewable energy resources. This review is designed to thoroughly explore the electrification concept in decarbonizing distillation and present a detailed analysis and summary of the cutting-edge technologies used in various distillation operations. The focus is on creating electrified distillation processes and their associated utility systems, making use of a range of power-to-heat and intensification strategies, to achieve simultaneous carbon reduction and energy savings. With the increasing variety of operating environments that incorporate renewable power, this review additionally encompasses the control and operation aspects to ensure efficient management of electrified distillation processes. To further delve into the advantages of incorporating electrification into distillation, this work proposes future directions from the viewpoints of technological advancement, design optimization, operation, and real-time scheduling of electrified distillation processes. Furthermore, this review highlights the enormous potential of electrification in dramatically lowering carbon emissions and promoting sustainable practices in the distillation industry.@en

In industrial processes there are instances where heat pump assisted distillation falls short of full electrification, necessitating an auxiliary reboiler. To solve this limiting issue, this short communication proposes a new method using flash vapour circulation (FVC) to recuperate the waste heat within the heat pump cycle. This method incorporates a flash drum after the throttling valve to generate flash vapour. Rather than employing an auxiliary cooler for condensing the mixed vapour-liquid in a conventional heat pump system, the produced flash vapour is circulated back to the compressor inlet to enhance the recycled heat in the reboiler. With proper energy match, this approach has the potential to realise full electrification of distillation. The distillation of methanol/water serves as an illustrative case study, showcasing the viability of FVC which allows additional 22% energy savings, as compared to mechanical vapour recompression. Yet, this strategy may not be advantageous if the waste heat is already maximally utilised in preheating both the compressor and column inlet feed. The separation of tetrahydrofuran/water is used as case study to demonstrate the limitations of this approach.@en

As an important consideration in the chemical industry, chemical process safety has received notable attention in China. However, catastrophic chemical accidents still occur. To better understand why accidents continue to occur, this paper presented a diagnostic analysis of 14 major chemical accidents in China from 2012 to 2022 based on VOSviewer software. The authors analysed the correlation between the accident causation and their relationship with the safety management elements. The study observed that inferior process safety culture, intentional violation (rule-breaking) of procedure, inadequate safety training, and illegal operations were the most frequent causes of accidents. These causes highlighted the prominent gaps in PSM in China in the process safety culture, compliance with standards, the conduct of operations, process safety competency, and training & performance assurance. The results based on co-occurrence analysis indicated a strong correlation between these gaps in PSM. Enterprises should pay attention to collaborative management among them. These deficiencies in the enterprise's PSM system showed that the essential defects in China's chemical industry are a poor safety culture, inadequate accident investigation, inadequate training, and a lack of chemical safety personnel. The study recommended that the chemical industry establish superior process safety culture and competency for all personnel, monitor leading and lagging process safety indicators, apply inherent safety, and practice advanced safety management concepts. We hope that the findings can provide China's perspectives and strengths for global chemical safety.@en

The chemical process industry (CPI) in China is developing rapidly with installations becoming more complicated and integrated to meet people's rising demands for chemical-related products. However, the fast-growing CPI has caused catastrophic consequences and bad social influence due to accidents occurred in the last decades, which has threatened its sustainable development. As one of the solutions, the Chinese government is promoting chemical process safety education to train interdisciplinary graduates who understand both chemical process and loss prevention, who are skilled in technology, and how to manage risk. In this paper, we reviewed the development of chemical process safety education in China by researching syllabuses of accredited undergraduate Chemical Engineering and Safety Engineering majors in higher education institutions, discussed the associated shortcomings by analyzing the current discipline construction of the newly established major Chemical Safety Engineering, including education methodologies, resources, faculties, curriculum provision, and professional accreditation. Based on the analysis results, suggestions were provided to encourage institutions to strengthen chemical process safety education, thereby inherently reducing human errors and consequently improving the safety of the entire CPI.@en