Distillation is widely used for separating liquid mixtures, but its high heating demand poses challenges for achieving net-zero emissions. This study presents an innovative approach to electrifying distillation for load adaptability and flexible operation, aligning with dynamic electricity markets driven by renewables. The approach integrates flash vapor circulation and thermal storage into the distillation to optimize power usage and capitalizes on economic opportunities from load-flexible operation in response to fluctuating electricity pricing. A methanol/water distillation case study, using two typical electricity pricing scenarios, demonstrates that the proposed approach is more economically efficient than mechanical vapor recompression distillation, especially in lowering operational costs when the latter operates under fixed electricity pricing. However, compressor capital costs significantly impact overall costs, with sensitivity analysis examining different cost models. This approach can be applied to general distillation, allowing integration with the power sector and demand response programs, while enhancing flexibility, decarbonization, and efficiency.

@en

Distillation remains the leading and most frequently adopted technique for the separation and purification of condensable mixtures in numerous industries. However, the inherently poor thermal efficiency of distillation requires a large amount of thermal energy, making it the chief factor in total process energy usage and a significant emitter of carbon dioxide due to the combustion of fossil fuels. To address this issue, electrification has arisen as a popular approach to reduce carbon emissions in different processes by primarily replacing the energy source with electricity derived from renewable energy resources. This review is designed to thoroughly explore the electrification concept in decarbonizing distillation and present a detailed analysis and summary of the cutting-edge technologies used in various distillation operations. The focus is on creating electrified distillation processes and their associated utility systems, making use of a range of power-to-heat and intensification strategies, to achieve simultaneous carbon reduction and energy savings. With the increasing variety of operating environments that incorporate renewable power, this review additionally encompasses the control and operation aspects to ensure efficient management of electrified distillation processes. To further delve into the advantages of incorporating electrification into distillation, this work proposes future directions from the viewpoints of technological advancement, design optimization, operation, and real-time scheduling of electrified distillation processes. Furthermore, this review highlights the enormous potential of electrification in dramatically lowering carbon emissions and promoting sustainable practices in the distillation industry.@en

In industrial processes there are instances where heat pump assisted distillation falls short of full electrification, necessitating an auxiliary reboiler. To solve this limiting issue, this short communication proposes a new method using flash vapour circulation (FVC) to recuperate the waste heat within the heat pump cycle. This method incorporates a flash drum after the throttling valve to generate flash vapour. Rather than employing an auxiliary cooler for condensing the mixed vapour-liquid in a conventional heat pump system, the produced flash vapour is circulated back to the compressor inlet to enhance the recycled heat in the reboiler. With proper energy match, this approach has the potential to realise full electrification of distillation. The distillation of methanol/water serves as an illustrative case study, showcasing the viability of FVC which allows additional 22% energy savings, as compared to mechanical vapour recompression. Yet, this strategy may not be advantageous if the waste heat is already maximally utilised in preheating both the compressor and column inlet feed. The separation of tetrahydrofuran/water is used as case study to demonstrate the limitations of this approach.@en