Since 2020, all commercial aircraft have been mandated to be equipped with ADS-B Out
transponders. Despite the many advantages of locating an aircraft with openly available and
accessible data, it also has some limitations. Firstly, not all aircraft, such as general aviation, are required to transmit their locations; secondly, due to obstacles such as buildings,
a location is not always transmitted at lower altitudes (75-130 m); thirdly, it is vulnerable to cyberattacks. Therefore, while it is convenient to have ADS-B Out data, creating a
computationally efficient alternative methodology for determining the aircraft location is
advisable. This paper investigates the accuracy, efficiency, and computational cost of two
methods of source localization using data taken by an array of microphones: a global optimization (GO) method called the differential evolution (DE) and the conventional beam-
forming approach (CBF). The real-world data required as input for both methods is obtained
with a 64-microphone phased array placed at a distance of 1.14 km from Rotterdam The
Hague Airport (RTHA). The 2-dimensional flight trajectories, i.e., azimuth, and elevation
relative to the array, obtained from the GO and CBF methods, are compared with the ADS-
B Out data for approaching and departing flyovers. Furthermore, the smallest size of an
array required for satisfactory localization accuracy is investigated.@en

To reduce the growing distrust in aircraft noise models felt by communities around the airport, it is imperative to ensure accurate modelling methodologies validated by appropriately measured noise metrics. This is especially crucial in regions farther from the airport where Lden = 45 - 55 dBA because the amount of affected residents in these areas is large. Currently, there is a lack of measured noise levels at such distances and uncertainty about the assumed procedures, such as the aircraft thrust settings. Regarding the latter, before comparing the model and measured noise levels, it’s thus crucial to first create a robust workflow for obtaining accurate input data for the noise predictions. In this contribution, as a first step, audio files from the noise monitoring stations around Rotterdam The Hague airport (RTHA), combined with dedicated array and single microphone measurements, are considered for extracting fan rotational speed, N1. The 64-microphone array and the single microphone system were co-located with one of the monitoring stations at a distance of 1.14 km away from the RTHA runway. The engine settings are retrieved from the intensity-averaged spectrograms obtained from the microphone array. Using the derived thrust settings, the noise levels measured by the monitoring stations are compared with the single-event noise level prediction made by the European Noise model, Doc.29. The aircraft position, i.e., input for the model, is obtained from ADS-B data, which contains the position vector and velocity of the aircraft at 1-second intervals. In the framework of this study, noise predictions for both arrival and take-off procedures for three aircraft types are presented. Finally, this case study aims to investigate the applicability of the data from monitoring stations for the aim of model-data predictions at the mentioned regions.@en