Geothermal energy is a green source of power that could play an important role in climate-conscious energy portfolios; enhanced geothermal systems (EGS) have the potential to scale up exploitation of thermal resources. During hydraulic fracturing, fluids injected under high-pressure cause the rock mass to fail, stimulating fractures that improve fluid connectivity. However, this increase of pore fluid pressure can also reactivate pre-existing fault systems, potentially inducing earthquakes of significant size. Induced earthquakes are a significant concern for EGS operations. In some cases, ground shaking nuisance, building damages, or injuries have spurred the early termination of projects (e.g., Basel, Pohang). On the other hand, EGS operations at Soultz-sous-Forêts (France), Helsinki (Finland), Blue Mountain (Nevada, USA), and Utah FORGE (USA) have adequately managed induced earthquake risks. The success of an EGS operation depends on economical reservoir enhancements, while maintaining acceptable seismic risk levels. This requires state-of-the-art seismic risk management. This article reviews domains of seismology, earthquake engineering, risk management, and communication. We then synthesize “good practice” recommendations for evaluating, mitigating, and communicating the risk of induced seismicity. We advocate for a modular approach. Recommendations are provided for key technical aspects including (a) a seismic risk management framework, (b) seismic risk pre-screening, (c) comprehensive seismic hazard and risk evaluation, (d) traffic light protocol designs, (e) seismic monitoring implementation, and (f) step-by-step communication plans. Our recommendations adhere to regulatory best practices, to ensure their general applicability. Our guidelines provide a template for effective earthquake risk management and future research directions.

@en

Geothermal energy is a source of clean, renewable, and sustainable power that could play an important role in future energy portfolios. Enhanced Geothermal Systems (EGS) in particular have the potential to scale up accessibility to thermal resources. Seismic events of significant size associated with the development of EGSs display a negative socio-economic impact, posing a risk to the local infrastructure and the public, undermining the public acceptance of pending and future projects. To achieve a sustainable exploitation of geothermal resources using EGS, reservoir productivity needs to be enhanced while keeping seismic risk at an acceptable level during all stages of the project. In this document, we recommend good practices to evaluate, mitigate and communicate the risk of induced seismicity for EGS projects. This document is produced by the DEEP consortium, with input from more than 17 experts, with expertise in geophysics, seismology, earthquake engineering, risk management and communication. We advocate for a modular approach, providing recommendations on (1) seismic risk pre-screening, (2) data acquisition and research, (3), communication and outreach, (4) comprehensive seismic risk analysis, (5) seismic monitoring, (6) traffic light protocols, and (7) operational mitigation strategies. Our framework is designed to facilitate various stakeholders, such as regulators, operators, independent experts and affected communities.
@en

Firn densification profiles are an important parameter for ice-sheet mass balance and palaeoclimate studies. One conventional method of investigating firn profiles is using seismic refraction surveys, but these are difficult to upscale to large-area measurements. Distributed acoustic sensing (DAS) presents an opportunity for large-scale seismic measurements of firn with dense spatial sampling and easy deployment, especially when seismic noise is used. We study the feasibility of seismic noise interferometry (SI) on DAS data for characterizing the firn layer at the Rutford Ice Stream, West Antarctica. Dominant seismic energy appears to come from anthropogenic noise and shear-margin crevasses. The DAS cross-correlation interferometry yields noisy Rayleigh wave signals. To overcome this, we present two strategies for cross-correlations: (a) hybrid instruments—correlating a geophone with DAS, and (b) stacking of selected cross-correlation panels picked in the tau-p domain. These approaches are validated with results derived from an active survey. Using the retrieved Rayleigh wave dispersion curve, we inverted for a high-resolution 1D S-wave velocity profile down to a depth of 100 m. The profile shows a “kink” (velocity gradient inflection) at ∼12 m depth, resulting from a change of compaction mechanism. A triangular DAS array is used to investigate directional variation in velocity, which shows no evident variations thus suggesting a lack of azimuthal anisotropy in the firn. Our results demonstrate the potential of using DAS and SI to image the near-surface and present a new approach to derive S-velocity profiles from surface wave inversion in firn studies.

@en

Prospects for geothermal energy in the Netherlands have renewed concerns around induced earthquakes. Risks from induced earthquakes are managed by traffic light protocols (TLPs), where the red-light is chosen as the stop-point before exceeding a tolerance to risk. Here, we simulate post-shut-in earthquake scenarios based on realistic information for the Netherlands. We focus on three risk metrics: aggregates like nuisance and damage impacts and also local personal risk (LPR) – a likelihood of building collapse fatality for an individual. Our results show that the severity of these risks varies spatially by orders of magnitude. Prior induced seismicity (e.g., the 2012 Huizinge event) provides a reference baseline to calibrate the Dutch earthquake risk tolerances. We find that these calibrated risk tolerances are similar to those observed in North America, suggesting an underlying sociological ‘license to operate.’ Furthermore, the use of calibrated risk tolerances results in nuisance concerns completely eclipsing the other two metrics. We compare our results to a hypothetical Groningen geothermal operation and find that our approach sets red-light thresholds approximately one magnitude unit below the M_L 3.6 Huizinge event. Overall, our results provide a first-order recommendation for red-light thresholds and proactive management of Dutch enhanced geothermal induced seismicity.

@en

In this study, we show that passively recorded data of nearby passing trains by a deep borehole geophone array could be linked to fluctuations of the gas-water contact in the Groningen reservoir in The Netherlands. During a period of 1.5 months, changes of inter-geophone P-wave travel times were detected by deconvolution interferometry of the recorded train signals. P-to-S converted waves, obtained by deconvolution of the horizontal component by the vertical component at individual geophones, showed simultaneous variations. The observed travel-time changes could be related to fluctuations of the gas-water contact in the observation well caused by pressure variations at a well drilling 4.5 km away. The ∼ 3.5 day delay between drilling in the reservoir and the seismic response yields a hydraulic diffusivity of approximately 5 m²/s and suggests that the pressure front is effectively propagated over such a long distance. Our observations illustrate that downhole geophone arrays can be used to monitor changes in the subsurface if repeating noise sources are available, and that unexpected effects may occur due to drilling.

@en