Additively manufactured Nitinol (NiTi) architectured materials, designed with unit cell architectures, hold promise for customisable applications. However, the common assumption of homogeneity in modeling and additive manufacturing of these architectured materials needs further investigation because geometric-dependent melt pool behaviour results in inhomogeneous microstructure and thermomechanical properties. This study shows that property inhomogeneity at the mesoscale is one reason for pseudo-linear response and partial superelasticity of the fabricated NiTi body-centered cubic (BCC) architectured materials. We modeled using a phenomenological constitutive relation and additively manufactured NiTi architectured materials with varying relative densities. These fabricated samples showed distinct microstructural textures and compositions that affected their local recoverability. The edge effects and laser turn regions were identified as the causes underlying the observed microstructural inhomogeneity. The dimensionless Fourier number is used to describe the transition of printing modes. This study provides valuable information on rigorous experimental/computational consistency in future work.

@en

Sub-size specimen testing offers a potentially elegant solution to accompany fatigue life assessments in determining vital fatigue parameters such as effective fatigue crack growth propagation thresholds (ΔK_th,eff). Additively manufactured parts stand to benefit from this in potential build-by-build fatigue validation without foregoing process-inherent material saving and low lead times. In this study, sub-size Laser Powder Bed Fusion (LPBF) produced Ti-6Al-4 V SENB specimens built in two orientations with stress relieved and annealed material states are considered. Scanning electron microscopy with electron backscatter diffraction is used to consider both meso- and microstructural features, complimented by digital image correlation (DIC) for determining local stress intensity and triaxiality around the crack tip. Results show inconsistent near-threshold fatigue behaviour linked to the microstructure of annealed material, where the fatigue threshold in sub-size specimens is reduced. Furthermore, reducing specimen size influences both in- and out-of-plane crack tip constraint, with higher constraint experienced by the sub-size specimens. Overall, this study presents and discusses the domain and suitability in using sub-size specimen FCGR threshold testing for LPBF produced Ti-6Al-4 V builds considering their unique meso- and microstructural features.

@en

This study investigated the in-situ gaseous (under 150 bar) hydrogen embrittlement behaviour of additively manufactured (AM) Inconel 718 produced from sustainable feedstock. Here, sustainable feedstock refers to the Inconel 718 powder produced by vacuum induction melting inert gas atomisation of failed printed parts or waste from CNC machining. All Inconel 718 samples, namely AM-as-processed, AM-heat-treated and conventional samples showed severe hydrogen embrittlement. Additionally, it was found that despite its higher yield strength (1462 ± 8 MPa) and the presence of δ phase, heat-treated AM Inconel 718 demonstrates 64% lower degree of hydrogen embrittlement compared to the wrought counterpart (Y.S. 1069 ± 4 MPa). This was linked to the anisotropic microstructure induced by the AM process, which was found to cause directional embrittlement unlike the wrought samples showing isotropic embrittlement. In conclusion, this study shows that AM Inconel 718 produced from recycled feedstock shows better hydrogen embrittlement resistance compared to the wrought sample. Furthermore, the unique anisotropic properties, seen in this study for Inconel 718 manufactured by laser powder bed fusion, could be considered further in component design to help minimise the degree of hydrogen embrittlement.@en

In this work, the hydrogen fatigue of pipeline steel X60, its girth welds and weld defects were investigated through in situ fatigue testing. A novel in situ gaseous hydrogen charging fatigue set-up was developed, which involves a sample geometry that mimics a small-scale pipeline with high internal hydrogen gas pressure. The effect of hydrogen was investigated by measuring the crack initiation and growth, using a direct current potential drop (DCPD) set-up, which probes the outer surface of the specimen. The base and weld metal specimens both experienced a reduction in fatigue life in the presence of hydrogen. For the base metal, the reduction in fatigue life manifested solely in the crack growth phase; hydrogen accelerated the crack growth by a factor of 4. The crack growth rate for the weld metal accelerated by a factor of 8. However, in contrast to the base metal, the weld metal also experienced a reduction of 57% in resistance to crack initiation. Macropores (>500 µm in size) on the notch surface reduced the fatigue life by a factor of 11. Varying the pressure from 70 barg to 150 barg of hydrogen caused no difference in the hydrogen fatigue behavior of the weld metal. The fracture path of the base and weld metal transitioned from transgranular and ductile in nature to a mixed-mode transgranular and intergranular quasi-cleavage fracture. Hydrogen accelerated the crack growth by decreasing the roughness- and plasticity-induced crack closure. The worst case scenario for pipelines was found in the case of weld defects. This work therefore highlights the necessity to re-evaluate pipelines for existing defects before they can be reused for hydrogen transport.@en

In energy absorption applications, architectured metallic materials generally suffer from unrecoverable deformation as a result of local yield damage or inelastic buckling. Nitinol (NiTi) offers recoverable deformation and energy dissipation due to its unique superelasticity, which can change the way we design and additively manufacture energy-absorbing architectured materials. The interplay between microstructure, mesoscopic deformation, and macroscopic thermomechanical response of NiTi architectured materials is still not studied in depth. In this work, NiTi architectured materials featuring anisotropic superelastic response, recoverable energy absorption and damping were successfully modeled and manufactured using laser powder bed fusion (L-PBF). Extensive numerical models demonstrated that NiTi architectured materials exhibit temperature-dependent superelasticity and effective transformation stress which can be controlled by the relative density and cell architecture. An effective transformation surface was developed based on the extended Hill's model, illustrating anisotropy is temperature-independent. Stable cyclic behavior with 2.8 % of reversible strain and damping behavior was successfully achieved in cyclic compressive tests without yielding damage or plastic buckling, which further illustrates that the progressive martensitic transformation is the main deformation and energy dissipation mechanism. A comparative study between designed herein body centered cubic (BCC) and octet structures showed that local microstructures significantly affect the deformation modes. The integrated computational and experimental study enables tailoring the superelasticity by combining structural design and microstructural control. Architectured materials designed in this study are potentially applicable as reusable impact absorbers in aerospace, automotive, maritime and vibration-proof structures.

@en