To investigate energy-saving approaches in wastewater treatment plants and decrease aeration energy consumption, this study successfully established a floc-granule coexistence system in a sequencing batch airlift reactor (SBAR) employing micro-bubble aeration. The analysis focused on granule formation and pollutant removal under various aeration intensities, and compared its performance with a traditional floc-based coarse-bubble aeration system. The results showed that granulation efficiency was positively associated with aeration intensity, which enhanced the secretion of extracellular polymeric substances (EPSs) and facilitated granule formation. The SBAR with the micro-aeration intensity of 30 mL·min-1 showed the best granulation performance (granulation efficiency 52.6%). In contrast to the floc-based system, the floc-granule coexistence system showed better treatment performance, and the best removal efficiencies of NH4+-N, TN, and TP were 100.0, 77.0, and 89.5%, respectively. The floc-granule coexistence system also enriched higher abundance of nutrients removal microbial species, such as Nitrosomonas (0.05-0.14%), Nitrospira (0.14-2.32%), Azoarcus (2.95-12.17%), Thauera (0.43-1.95%), and Paracoccus (0.76-2.89%). The energy-saving potential was evaluated, which indicated it is feasible for the micro-aeration floc-granule coexistence system to decrease the aeration consumption by 14.4% as well as improve the effluent.

Understanding and controlling the composition segregation during powder spreading is of key importance in the additive manufacturing (AM) of composite materials. Under this circumstance, the segregation behavior of WC/316 L composite powders during spreading in laser powder bed fusion (LPBF) AM was numerically investigated by the discrete element method. The effects of process conditions (i.e., spreader velocity and geometry) and powder properties (i.e., size and shape of the WC powder) on the powder bed composition segregation and related characteristics were systematically analyzed. Corresponding mechanisms were identified from microscopic scale in terms of particle velocity, motion trajectory, mechanical behavior, and energy information. Finally, proper solutions in designing and constructing WC/316 L composite materials with desired gradient structures were proposed. The results show that the small blade velocity (V) will enhance the negative segregation, increase the average packing density ρ¯, and decrease uniformity ρ_vc in the WC/316 L composite powder bed. Compared with the blade, the roller can increase the negative segregation (Se_roller = −0.027 < Se_blade = −0.019) and the average packing density (ρ¯_roller = 0.31>ρ¯_blade = 0.20). When the WC/316 L size ratio increases from 25 μm/45 μm to 45 μm/45 μm, the negative segregation becomes weaker, and its value increases from −0.084 to −0.007. When the size ratio increases to 65 μm/45 μm, the powder behaves positive segregation with Se_max = 0.017; in this case, the packing density is the lowest (0.14), and the uniformity is the worst (0.17). In comparison with spherical shape, polyhedral WC powder can reduce the negative segregation of the powder bed (Se_sphere = −0.019 < Se_polyhedron = −0.008), while the WC shape has less effect on the packing density and uniformity. The density difference of the WC and 316 L powders leads to the difference in energy and force, resulting in different motion and segregation behaviors in the composite powder bed. For WC/316 L composite powder with a fixed composition, the condition of V = 0.025 m/s, WC/316 L size ratio = 25 μm/45 μm, roller spreader, and spherical WC can realize the proper composition gradient along the spreading direction in the composite powder bed.

The packing densification of mono-sized equilateral cylindrical particles under mechanical vibration is numerically reproduced using discrete element method (DEM). The influences of vibration frequency, amplitude and container size on the macro property (e.g. packing density) of each packing are studied. Meanwhile, various micro-properties including coordination number (CN), radial distribution function (RDF), local structures, contact types, particle position/orientation distributions, forces/stresses of the vibrated dense packing are characterized and compared with those of the loose initial poured packing. The results show that properly controlling vibration conditions can realize the transition of equilateral cylindrical particles from random loose packing (RLP) to random close packing (RCP). The maximum packing density without wall effects can reach about 0.7166, which agrees with experimental and numerical results in literature. Micro property analyses demonstrate that the average CN increases slightly after vibration. The RDF curves indicate three obvious peaks for both poured and vibrated packings. The distributions of intersection angles imply that the perpendicular arrangements of the cylindrical particles are common in both packing structures. From RLP to RCP, the probability of side-edge, bottom-edge and edge-edge contacts between two particles decreases, while that of side-side, side-bottom and bottom-bottom contacts increases. Both particle position and orientation distributions illustrate that the structure in the center of the vibrated packing is disordered. The distribution of strong forces follows the exponential law, while that of weak forces follows the power law. The static vertical stresses in both packings can be predicted by Janssen model. After vibration, a much denser and more stable structure with a larger saturation stress is obtained due to the reducing inter-particle friction effects.