We have successfully demonstrated three 4×2 hot electron bolometer (HEB) mixer arrays, designed to operate between 4.2 and 5.5 K, with local oscillator (LO) frequencies of 1.4, 1.9, and 4.7 THz, respectively. These arrays consist of spiral antenna coupled NbN HEB mixers combined with elliptical lenses. These are to date the highest pixel count arrays using a quasi-optical coupling scheme at supra-THz frequencies. At 1.4 THz, we obtained an average double sideband mixer noise temperature of 330 K, a mixer conversion loss of 5.2 dB, and an optimum LO power of 210 nW. The array at 1.9 THz has an average mixer noise temperature of 425 K, a mixer conversion loss of 6.4 dB, and an optimum LO power of 190 nW. For the array at 4.7 THz, we obtained an average mixer noise temperature of 715 K, a mixer conversion loss of 8.9 dB, and an optimum LO power of 240 nW. We found the arrays to be uniform regarding the mixer noise temperature with a standard deviation of 3% to 4%, the conversion loss with a standard deviation of 8% to 11%, and optimum LO power with a standard deviation of 5% to 6%. The noise bandwidth was also measured, being 3.5 GHz for the three arrays. These performances are comparable to previously reported values in the literature for single pixels and also other detector arrays at similar frequencies. Our arrays met the instrument requirements and were employed in the Galactic/Extra-Galactic ULDB Spectroscopic Terahertz Observatory (GUSTO), a NASA balloon-borne observatory. GUSTO launched from Antarctica on the 31st of December 2023 having a successful flight of 57 days, the longest ever recorded by NASA for such a mission profile.@en

The High-Resolution Receiver (HiRX) is one of two instruments of the Single Aperture Large Telescope for Universe Studies (SALTUS), a mission proposed to NASA's 2023 Astrophysics Probe Explorer. SALTUS employs a 14 m aperture, leading to a 16-fold increase in collecting area and a factor of 4 increase in the angular resolution with respect to the Herschel Space Telescope. It will be radiatively cooled to ≤45 K and has a planned duration of >5 years. HiRX consists of four bands of cryogenic heterodyne receivers with a high sensitivity and high spectral resolution, being able to observe the gaseous components of objects across the far-IR. HiRX is going to detect water, HD, and other relevant astrophysical lines while resolving them in velocity. HiRX covers the following frequency ranges: Band 1 from 455 to 575 GHz, Band 2 from 1.1 to 2.1 THz, Band 3 from 2.475 to 2.875 THz, and Band 4 for both 4.744 and 5.35 THz. Bands 1 to 3 contain single, high-performance mixers. Band 4 consists of an array of seven hexagonally packed pixels, where the central pixel operates as a heterodyne mixer. Band 1 utilizes superconducting-insulator-superconducting mixers (SIS), whereas Bands 2 to 4 use superconducting hot electron bolometers (HEB) mixers. The local oscillator (LO) system uses frequency-multiplier chains for Bands 1 and 2, and quantum cascade lasers for Bands 3 and 4. Autocorrelator spectrometers are used to process the intermediate frequency (IF) signals from each science band, providing instantaneous frequency coverage of 4 to 8 GHz for Band 1 and 0.5 to 4 GHz for Bands 2 to 4. SALTUS will also fly a chirp transform spectrometer system for high spectral resolution observations in Band 1.@en

We have simulated and measured the beam properties of lens-antenna coupled hot electron bolometer mixers at a few supra-terahertz frequencies between 1.4 and 5.3 THz. The quasi-optical structures consist of an elliptical lens and a logarithmic spiral antenna. The model used for our simulations consists of a finite-element analysis to simulate the far-field radiation pattern of the antenna, geometrical optics to map the antenna radiation to the lens surface, and physical optics to calculate an arbitrary far field. We perform a thorough study of the beam properties, such as beam waist radius, phase center location and axial ratio by varying the diameter and extension of the lens, and misalignments of the antenna relative to the lens, at different operating frequencies. The simulation results are applied to the design and optimization of three different lenses for mixers to be operated at 1.4, 1.9, and 4.7 THz, respectively, which will be used in the heterodyne array receivers on board of NASA's balloon borne GUSTO observatory. The beam properties were verified experimentally by measuring the beam patterns in amplitude at multiple planes using a heterodyne technique. We found that the experimental results show good agreement with those from the simulations. Our work has delivered the mixers with the required beam characteristics for GUSTO.

@en

We report a high accuracy pointing technique for quasi-optical hot electron bolometer (HEB) mixers in focal-plane arrays designed to operate at 1.4, 1.9, and 4.7 THz. The high accuracy pointing is achieved by prealignment of a HEB chip to a lens, measuring the angular error of each mixer in an array assembly, and then realignment of the chip to the same lens to correct the error. The realigned mixers, using 5 mm diameter Si elliptical lenses designed for operation at 4.7 THz, show a final pointing error distribution with an average (μ) = 0.13° and standard deviation (σ) = 0.06°, with respect to the normal direction of the respective array plane. Those using 10 mm diameter lenses designed for operation either at 1.4 or 1.9 THz, show μ = 0.08° and σ = 0.03°. We demonstrated our pointing technique in five 4×2 HEB focal plane arrays developed for NASA's balloon borne GUSTO THz observatory. Our results corroborate the simulated beam steering factors used to calculate the realignment corrections. With the unprecedented pointing accuracy at the high frequencies, our technique can significantly facilitate the use of lens-antenna, quasi-optical mixers for future focal-plane arrays, which is able to compete with traditional feedhorn-waveguide mixer arrays, operated typically below 1 THz, for astronomical instrumentation.

@en

A full demonstration of the Fourier phase grating used as 4.7 THz local oscillator (LO) multiplexer for Galactic/Extragalactic ULDB Spectroscopic Terahertz Observatory (GUSTO) is presented in this paper, including its design, modeling, tolerance analysis, and experimental characterizations of the angular and intensity distributions among 2 × 4 output beams and the power efficiency. A quantum cascade laser (QCL) is used to generate the input beam for evaluation of the grating performance in its all relevant aspects with an accuracy level never reported before, where good agreements with modeling results are found. This is the first asymmetric-profile grating fully modelled and characterized at a THz frequency, that further confirms the versatility of this technology for providing an intermediate optical element for feeding multiple array detectors with a single radiation source at such a scientifically interesting frequency regime.

@en