This paper presents an accurate technique to extensively analyze the impact of time-zero (i.e., global and local variation) and time-dependent (i.e., voltage, temperature, workload, and aging) variation on the offset voltage specification of a memory sense amplifier design using 45 nm predictive technology model (PTM) high performance library. The results show that increasing the supply voltage both for time-zero and time-dependent reduces the offset voltage specification marginally, irrespective of the process corners. In contrast, the offset voltage specification is very sensitive to the temperature and the workload, i.e., the applied voltage patterns. The results also show that a balanced workload results in a significantly lower offset voltage specification. The above results can be used to estimate the required offset voltage accurately for a given lifetime, and operational conditions such as workload, temperature, and voltage; hence, enable the designer to take appropriate measures for a high quality, robust, optimal and reliable design.

@en

This paper proposes an appropriate method to estimate and mitigate the impact of aging on the read path of a high performance SRAM design; it analyzes the impact of the memory cell, and sense amplifier (SA), and their interaction. The method considers different workloads, technology nodes, and inspects both the bit-line swing (BLS) (which reflect the degradation of the cell) and the sensing delay (SD) (which reflects the degradation of the sense amplifier); the voltage swing on the bit lines has a direct impact on the proper functionality of the sense amplifier. The results with respect to the quantification of the aging, show for the considered SRAM read-path design that the cell degradation is marginal as compared to the sense amplifier, while the SD degradation strongly depends on the workload, supply voltage, temperature, and technology nodes (up to 41% degradation). The mitigation schemes, one targeting the cell and one the sense amplifier, confirm the same and show that sense amplifier mitigation (up to 15.2% improvement) is more effective for the SRAM read path than cell mitigation (up to 11.4% improvement).

@en

To compensate for time-zero (due to process variation) and time-dependent (due to e.g. Bias Temperature Instability (BTI)) variability, designers usually add design margins. Due to technology scaling, these variabilities become worse, leading to the need for bigger design margins. Typically, only worst-case scenarios are considered, which will not present the actual workload of the targeted application. Alternatively, mitigation schemes can be used to counteract the variability. This paper presents a run-time design-for-reliability scheme for memory Sense Amplifiers (SAs); SAs are an integral part of any memory system and are very critical for high performance. The proposed scheme mitigates the impact of time-dependent variability due to aging by using an on-line control circuit to create a balanced workload. The simulation results show that the proposed scheme can reduce the most critical figures-of-merit, namely the offset voltage shift and the sensing delay of the SA with up to ~40% and ~10%, respectively, depending on the stress conditions (temperature, voltage, workload).@en