In the long-term mining of geothermal resources in hot dry rock (HDR), the change of thermal stress and pore pressure will increase fracture conductivity evolution, further improving production performance. The optimization and decision-making of the development scheme based on the impact of damage from fractures have yet to be reported. The damage to fractures is essential in designing and adjusting geothermal resource development schemes, particularly in selecting optimal schemes. Therefore, the production performances of HDR resources under different parameters are analyzed to establish a database. Then, minimizing flow resistance, maximizing net power, and maximizing economic benefits are set as optimization goals. Various injection-mining parameters and fracture characteristics are treated as decision variables. Multi-objective optimization and multi-attribute decision analysis is conducted to obtain optimal schemes. Finally, optimal schemes are evaluated and compared, considering damage and non-damage scenarios. Results show that the NSGA-II algorithm is more suitable for optimizing geothermal development questions. Net power and economic benefits of the optimal scheme considering damage increase by 45.84 % and 21.35 % compared to the control scheme with damage. For the non-damage scenario, the above values increased by 31.55 % and 5.15 %, respectively. Compared to not considering the damage, higher mass flow and well spacing of optimal scheme can be selected for the case when damaged. Moreover, the parametric design of the optimal scheme becomes more conservative as the production cycle increases.

The fractures are the main flow and heat transfer channel for fluids in deep high-temperature enhanced geothermal systems (EGS). The deformation of the fracture controlled by reactive flow is a common phenomenon during geothermal development, which might lead to a reduction in the system's thermal performance and operating life. While most previous research focuses on the influence of fracture deformation on system heat extraction performance, conversely the fracture deformation mechanism caused by the reactive flow is ignored. In this paper, a coupled thermal-hydraulic-chemical-deformation (THCD) model is established to investigate the fracture deformation mechanism. The deformation behavior of quartz and anorthite is compared, and the Damkohler number (Da) is adopted to explore the reaction mechanism. Meanwhile, the influence mechanism of concentration and temperature on fracture deformation is also analyzed. Results show that the Da at the fracture surface is 10⁻¹² -10⁻⁸, which means that the deformation of the fracture is controlled by the reaction rate. Compared with the concentration, the influence of temperature on fracture deformation is complex, and there is an inflection point. The inflection point is governed by the mineral reaction kinetics. These results provide significant references for the efficient heat extraction of the EGS.

Geothermal is an important renewable energy source, but the high cost of drilling limits its popularization. The oilfield area is rich in geothermal resources and has a large number of high-temperature abandoned wells. It is an economic and effective method to transform the abandoned wells into geothermal wells. At present, the heat extraction research of abandoned wells mostly focuses on single-well closed systems, while the most common in oilfields is the well patterns open system, which involves the flow and heat extraction of oil-water multiphase. More, the main utilization mode of oilfield geothermal is heating, which is an intermittent operation, and the existence of the heat recovery period makes the solution process more complicated compared to continuous production. Therefore, the numerical simulation of oil-water two-phase and the scheme optimization under intermittent operation are the key problems in the current oilfields geothermal research, that is, it should be made clear what the effects of operation parameters are and how to get the optimization design for the intermittent mining of heat-oil cogeneration from abandoned wells. For this reason, the oil-water two-phase heat-flow coupling model and economic evaluation model are established. Then, database is established through parameter sensitivity analysis, and multi-objective optimization research is carried out on the lifetime and economic benefits using Non Sorting Genetic Algorithm II (NSGA-II). The results show that economic benefit and end-point temperature of the optimized scheme are enhanced by 6.75 million US dollars and 7.10 K after 15-year production, respectively. The heat-oil cogeneration performance is superior, so the influence of oil phase cannot be ignored in the heating process of the well patterns system for oilfield geothermal production.

The multi-physics coupling process during the heat extraction from enhanced geothermal system, encompassing thermo(T)-hydro(H)-mechanical(M)-chemical(C) interactions, plays a pivotal role in changing geothermal reservoir characteristics. However, a comprehensive quantitative assessment of these multi-physics behaviors has been lacking. In this study, a novel approach was proposed to calculate the magnitude of mechanical, chemical, strong mechanical-chemical coupling, and weak mechanical-chemical coupling effects on the variations of reservoir characteristics. In particular, mechanical-chemical coupling effects are quantified for the first time. They are obtained by the fracture aperture difference results across five distinct coupling models (thermo-hydro, thermo-hydro-chemical, thermo-hydro-mechanical, partially-coupled four-field, and fully-coupled four-field models). The findings indicate that mechanical effects lead to an increase in fracture aperture, while chemical effects contribute to its reduction under underbalanced injection conditions. Strong mechanical-chemical coupling effects, exhibiting a negative correlation with chemical effects, conversely result in a diminished fracture aperture. The influences of these effects are investigated from the temporal and spatial perspectives. Temporally, mechanical effects dominate early production while chemical effects become prominent in later stages. Spatially, there mainly exists two zones when stable production: a mechanical-controlled region surrounding injection wells, and a chemical-controlled area distant from the injection wells. Furthermore, sensitivity analysis of injection concentration indicates its alternation changes the reservoir traits and production performance by modifying the magnitudes of chemical and mechanical-chemical coupling effects. This quantification of multi-physics effects offers insights into optimizing injection strategies for better geothermal development. The approach could hold promising potential in other geo-energy scenarios like carbon and hydrogen storage in reservoirs.