The current literature on solid oxide fuel cell and internal combustion engine (SOFC-ICE) integration is focused on the application of advanced combustion technologies operating as bottoming cycles to generate a small load share. This integration approach can pose challenges for ships such as restricted dynamic capabilities and large space and weight requirements. Furthermore, the potential of SOFC-ICE integration for marine power generation has not been explored. Consequently, the current work proposes a novel approach of SOFC-ICE integration for maritime applications, which allows for high-efficiency power generation while the SOFC anode-off gas (AOG) is blended with natural gas (NG) and combusted in a marine spark-ignited (SI) engine for combined power generation. The objective of this paper is to investigate the potential of the proposed SOFC-ICE integration approach with respect to system efficiency, emissions, load sharing, space and weight considerations and load response. In this work, a verified zero-dimensional (0-D) SOFC model, engine experiments and a validated AOG-NG mean value engine model is used. The study found that the SOFC-ICE integration, with a 67–33 power split at 750 kWe power output, yielded the highest efficiency improvement of 8.3% over a conventional marine natural gas engine. Simulation results showed that promising improvements in efficiency of 5.2%, UHC and NOx reductions of about 30% and CO₂ reductions of about 12% can be achieved from a 33–67 SOFC-ICE power split with comparatively much smaller increments in size and weight of 1.7 times. Furthermore, the study concluded that in the proposed SOFC-ICE system for maritime applications, a power split that favours the ICE would significantly improve the dynamic capabilities of the combined system and that the possible sudden and large load changes can be met by the ICE.

@en

With increasingly stringent emission regulations, marine natural gas engines need to improve their performance. Various proven advantages of hydrogen-natural gas (H-NG) blends make them a promising enhanced fuel solution. Although modelling of H-NG combustion has been investigated before, mostly using CFD models, the literature on the modelling capabilities of Seiliger-based and Wiebe-based zero-dimensional (0-D) models is limited for H-NG combustion. Especially for the application of marine lean-burn spark-ignited (SI) engines. Therefore, the aim of this paper is to compare the capabilities of Seiliger-based and double Wiebe function-based 0-D models to capture H-NG combustion in a marine SI engine for different H-NG fuel blends, engine leaning (lean-burn operation) and engine loads. In this work, measurements on a turbocharged, SI marine natural gas engine were used to develop a heat release rate model, which was subsequently used as a basis for the Seiliger and double Wiebe function-based H-NG combustion characterization models. Results from the two combustion modelling approaches were compared for different H-NG fuel blends, engine leaning (lean-burn operation) and engine loads. The modelling results were also compared against engine measurements for different experimental conditions. This paper shows that the Seiliger modelling approach can be used to define different physical phenomenon in H-NG combustion, while accurately capturing the effects of hydrogen addition and engine leaning on the H-NG combustion process at varying engine loads. This research also found that the variations in late burn phase present in lean-burn NG and H-NG combustion can be captured using the double-Wiebe modelling approach, however, clear trends of the Wiebe combustion parameters for varying fuel blends and engine loads could not be identified to accurately capture the H-NG combustion process. Furthermore, Wiebe-based modelling approach produced larger errors in the estimations of work output and combustion heat for all test conditions.

@en

A novel ship propulsion concept employs natural gas to reduce ship emissions and improve overall ship propulsion efficiency. This concept proposes a serial integration of Solid Oxide Fuel Cell (SOFC) and a natural gas engine, while anode-off gas (gas at the fuel cell exhaust) is used in the natural gas engine. This study focusses on SOFC-gas engine integration by experimentally analyzing the effects of adding hydrogen, which is the main combustible component of the fuel cell anode-off gas, in marine natural gas engines. The overall challenge is to employ the anode-off gas to improve the performance of marine natural gas engines. To study the effects of anode-off gas combustion in natural gas engines, experiments with hydrogen addition in a marine natural gas engine of 500 kW rated power were performed. Natural gas was replaced with 10 % and 20 % of hydrogen, by volume, without any penalties in terms of output power. We found that the high combustion rate of hydrogen improved combustion stability, which allowed for better air-excess ratio control. Thus allowing leaning to higher air-excess ratios and extending the, otherwise, limited operating window. Hydrogen addition also improved brake thermal efficiency by 1.2 %, while keeping NOx emissions below the maritime emission regulations. The improvement in engine efficiency with a larger operating window may help improve the load-taking capabilities of marine natural gas engines.@en