The increasing prevalence of calcium pyrophosphate dihydrate (CPPD) deposition disease, a form of arthritis with high inflammatory potential, has triggered considerable interest in the search for additives to prevent CPPD crystal formation, particularly in the field of biomineralization. In this context, CPPD crystallization in aqueous solution with and without glycine, glutamic acid, or glycyl-L-glutamic acid as crystal-growth modifier was experimentally investigated. The produced crystals were characterized structurally, morphologically, and in terms of their surface charge. In addition, the thermal degradation profiles of CPPD crystals obtained with and without the modifiers were characterized by TGA-FTIR, and the major volatile product was H₂O.

Large amounts of carbon monoxide are produced by industrial processes such as biomass gasification and steel manufacturing. The CO present in vent streams is often burnt, this produces a large amount of CO₂, e.g., oxidation of CO from metallurgic flue gasses is solely responsible for 2.7% of manmade CO₂ emissions. The separation of N₂ from CO due to their very similar physical properties is very challenging, meaning that numerous energy-intensive steps are required for CO separation, making the CO separation from many process streams uneconomical in spite of CO being a valuable building block in the production of major chemicals through C1 chemistry and the production of linear hydrocarbons by the Fischer-Tropsch process. The development of suitable processes for the separation of carbon monoxide has both industrial and environmental significance. Especially since CO is a main product of electrocatalytic CO₂ reduction, an emerging sustainable technology to enable carbon neutrality. This technology also requires an energy-efficient separation process. Therefore, there is a great need to develop energy efficient CO separation processes adequate for these different process streams. As such the urgency of separating carbon monoxide is gaining greater recognition, with research in the field becoming more and more crucial. This review details the principles on which CO separation is based and provides an overview of currently commercialised CO separation processes and their limitations. Adsorption is identified as a technology with the potential for CO separation with high selectivity and energy efficiency. We review the research efforts, mainly seen in the last decades, in developing new materials for CO separation via ad/bsorption and membrane technology. We have geared our review to both traditional CO sources and emerging CO sources, including CO production from CO₂ conversion. To that end, a variety of emerging processes as potential CO₂-to-CO technologies are discussed and, specifically, the need for CO capture after electrochemical CO₂ reduction is highlighted, which is still underexposed in the available literature. Altogether, we aim to highlight the knowledge gaps that could guide future research to improve CO separation performance for industrial implementation.

Electrochemical carbon dioxide (CO₂) reduction is a promising route to convert intermittent renewable energy into fuels and valuable chemical products. Separation of CO₂ reduction products by ion-selective electrochemical technology may play a decisive role in the pursuit of commercially viable CO₂ reduction processes. Selective separation of formate, one of the main CO₂ reduction products, is assessed in the present study in an electrochemical flow cell with symmetric redox-active polyvinyl ferrocene (PVF) functionalized graphene oxide (GO) electrodes. First, experimental parameters such as the PVF/GO ratio, sonication time, and ultrasonic amplitude, were optimized in the electrode preparation process to improve the formate adsorption efficiency on a lab scale (1 × 2 cm electrodes) under static conditions. The electrochemical and morphological characteristics of the electrodes were investigated by cyclic voltammetry and scanning electron microscopy. To demonstrate continuous-flow operation, an electrosorption flow cell (8 × 8 cm) providing inline measurements was constructed. The flow cell results showed selectivity at > 5.5 toward the removal of formate from an electrolyte containing perchlorate at an excess of 30 times the normal value. The performance of the electrosorption cell was also tested using a mixture of methanol, ethanol, formate, and acetaldehyde produced in a CO₂ reduction electrolyzer. In this demonstration, formate separation was achieved with a selectivity of > 4.0. The results suggest that the optimized design of the electrochemical cell and operation conditions of the flow platform pave the way for scaling up selective formate separation with PVF/GO electrodes.

Elevated humidity levels in medical, food, and pharmaceutical products may reduce the products' shelf life, trigger bacterial growth, and even lead to complete spoilage. In this study, we report a humidity indicator that mechanically bends and rolls itself irreversibly upon exposure to high humidity conditions. The indicator is made of two food-grade polymer films with distinct ratios of a milk protein, casein, and a plasticizer, glycerol, that are physically attached to each other. Based on the thermogravimetric analysis and microstructural characterization, we hypothesize that the bending mechanism is a result of hygroscopic swelling and consequent counter diffusion of water and glycerol. Guided by this mechanism, we demonstrate that the rolling behavior, including response time and final curvature, can be tuned by the geometric dimensions of the indicator. As the proposed indicator is made of food-grade ingredients, it can be placed directly in contact with perishable products to report exposure to undesirable humidity inside the package, without the risk of contaminating the product or causing oral toxicity in case of accidental digestion, features that commercial inedible electronic and chemo-chromatic sensors cannot provide presently.

Selective ion separation is a fundamental challenge with applications ranging from the manufacturing of pharmaceuticals & industrial salts to water desalination. In particular, the separation of formate, a primary product of electrochemical carbon dioxide reduction, has attracted attention not only to reduce carbon emissions and energy costs but to provide new routes to value-added chemicals. In the present study, selective formate separation from an aqueous solution is demonstrated using an electrochemical flow cell with symmetric redox-active polyvinyl ferrocene electrodes. An electrosorption system equipped with an electrosorption cell, inline conductivity, and pH sensors was constructed to provide real-time measurements of the formate adsorption performance in continuous flow mode while varying operating conditions such as the flow rate, cell voltage, and electrolyte concentration. These parameters were optimized using a Box–Behnken experimental design to improve the formate adsorption selectivity. The flow cell results showed a selectivity higher than 6.0 toward the removal of formate in an electrolyte containing a 30-fold excess of perchlorate under optimal operation conditions (i.e., 0.5 mL/min flow rate, 1.0 V, and 15 mM electrolyte concentration). The performance of the flow cell was also tested using a solution that contained different liquid CO₂ reduction products, and formate separation was achieved. The results suggest that the proper design of the electrochemical cell and efficient operation of the flow platform pave the way for scaling up the technology for selective formate separation.

The struvite crystals constitute one of the common types of urinary stones. Such stones are also referred as “infection stones” due to their tendency to cause infections in urinary tract. A considerable effort has been placed to identify natural or synthetic crystal-growth modifiers for this kind of urinary stone in literature, yet macromolecules commonly found in urine have been underexplored. In the present study, we experimentally focus on how hyaluronic acid, a protein commonly found in urine, alters the struvite crystallization in aqueous solution and in an artificial urine media. By gradually adding ammonium dihydrogen phosphate to a solution containing magnesium chloride hexahydrate, reactive crystallization is carried out in a well-mixed and thermostated vessel at 37 °C. The resulting struvite crystals are characterized structurally by XRD and FTIR as well as morphologically and in terms of their surface charge. In addition, the thermal decomposition behavior of the struvite with and without hyaluronic acid and released volatile products were simultaneously investigated using a TGA/FTIR system. The average activation energy calculated using the Friedman method was 49.2 ± 5.1 kJ/mol. The results of the kinetic and thermodynamic analyses showed that decomposition of the struvite crystals was endothermic and followed the multiple stage reaction mechanism.

The selective separation of ions is a major technological challenge having far-ranging impacts from product separation in electrochemical production of base chemicals from CO₂ to water purification. In recent years, ion-selective electrochemical systems leveraging redox-materials emerged as an attractive platform based on their reversibility and remarkable ion selectivity. In the present study, we present an ultrasound-intensified fabrication process for polyvinyl ferrocene (PVF)–functionalized electrodes in a carbon nanotube (CNT) matrix for selective electro-adsorption of formate ions. To this end, a response surface methodology involving the Box–Behnken design with three effective independent variables, namely, PVF to CNT ratio, sonication duration, and ultrasonic amplitude was applied to reach the maximum formate adsorption efficiency. The fabricated electrodes were characterized using cyclic voltammetry, X-ray diffraction, Raman spectroscopy, and scanning electron microscopy (SEM). SEM images revealed that an optimized ultrasonic amplitude and sonication time provided remarkable improvements in electrode morphology. Through a sedimentation study, we qualitatively demonstrate that the main optimized conditions improved PVF/CNT dispersion stability, consequently providing the highest number of active surface sites for adsorption and the highest adsorption efficiency. The highest percentage of active electrode surface sites and the maximum adsorption efficiency were 97.8 and 90.7% respectively at a PVF/CNT ratio of 3, ultrasonication time of one hour, and 50% ultrasonic amplitude.

Pathological crystallization of calcium oxalate (CaOx), the most common constituent of kidney stones, has attracted much attention due to recent surge in reported natural and synthetic additives effectively inhibiting its nucleation and growth. The aim of this study is to investigate the effect of L-alanyl–glycine (Ala–Gly), a dipeptide commonly found in human urine, on CaOx crystallization and its phase transformation in the presence of an artificial urine media. The nucleated CaOx crystals are characterized by XRD, FTIR, SEM, and dynamic light scattering in terms of changes in their crystalline form, morphology, and size. XRD and FTIR results revealed that Ala–Gly inhibited the formation of the thermodynamically most stable phase of CaOx, calcium oxalate monohydrate (COM) crystals. SEM images revealed that hexagonal plate-shaped COM crystals are transformed into the smaller tetragonal bipyramidal calcium oxalate dihydrate (COD) crystals with increasing additive concentrations. At 125 ppm Ala–Gly concentration more pronounced aggregation of CaOx crystals is observed accompanied with higher negative zeta potential value of −27.1 ± 2.9 mV. Moreover, the phase transformation from COM to COD is also confirmed through thermogravimetric analysis. Consequently, these results suggest that Ala–Gly has a profound effect on preventing the formation of COM crystals and helping to stabilize the COD crystals, a CaOx phase that is reported to have a lower tendency to stick to kidney cells thus decreasing the risk of stone formation. The reported suppression of COM in the presence of Ala–Gly might be significant to clinicians in their attempt to develop a long-term effective treatment for kidney stones.

Recent surge in reports describing new additives that inhibiting the growth and nucleation of calcium oxalate (CaOx), the most common component of renal calculi or kidney stones, have rekindled interest in CaOx crystallization. In this in vitro study, the effect of hyaluronic acid (HA), a protein commonly found in urine, on the morphology and phase of the CaOx crystals is investigated. CaOx crystals were crystallized at pH 5.8 and 37 °C with a [Ca²⁺]:[C₂O₄^2-] ratio of 20:1, which is close to physiological conditions, in aqueous solution and artificial urine media. The obtained crystals were characterized structurally, morphologically and in terms of their surface charge. The crystals precipitated in aqueous solution without the HA additive were pure phase calcium oxalate monohydrate (COM) crystals with typical hexagonal morphology. The addition of HA partially promotes the transformation of COM into calcium oxalate dihydrate (COD) in aqueous solution. However, the only solid phase to form in artificial urine media with and without HA was identified as COD with tetragonal bipyramidal morphology. The results of this investigation will contribute to the understanding of the role HA plays on the morphology, structure, and thermal characteristics of CaOx and ultimately facilitate the development of effective treatments for kidney stones.