In order to improve the survival capability of passenger and ro-ro ships in event of fire or flooding, in the last few years a set of international Regulations has been issued. In particular, the Regulation SOLAS “Safe Return to Port” is addressed towards design criteria able to guarantee adequate functionality of the ship when a casualty occurs. The Regulation requires the evacuation of the ship when a given threshold of damage (i.e., fire and flood) is exceeded. The evacuation analysis has become of primary importance even in the early-stage design. Indeed, the new amendments to SOLAS Regulation II-2/13.3.2.7 makes the evacuation analysis mandatory for both new and existing passenger and ro-ro ships since the early steps of the project. In this paper, the current IMO Guidelines have been analysed, and a case study for the evacuation of a 3600-person cruise ship has been carried out by means of both a simplified and an advanced method. To perform advanced calculations, two different software, based on virtual reality, have been used and the results have been compared with simplified method ones.

Passenger ships evacuation analysis is nowadays a required step in the ship design process. In this sense, a new set of international Regulations has been issued to improve the survival ability of passenger and ro-ro ships. The 'Safe Return to Port' Regulation is referring to the need to grant adequate ship functionality when a casualty occurs (e.g. fire or flooding), requiring the ship evacuation when damage exceeds a given threshold. For such a reason, the evacuation analysis is mandatory for both new and existing passenger and ro-ro ships, since the early stages of design. The International Maritime Organisation Guidelines prescribe the examination of additional scenarios besides the standard ones. The present work presents a case study for the evacuation of a 4906-person cruise ship, considering the specific example of the open deck, which is one of the additional scenarios required by regulations. The advanced calculation method has been used to simulate the evacuation process, using software EVI.

The continuous increasing attention to environmental sustainability and air pollution reduction for transport systems, requires not only to adopt new technologies and innovative solutions to limit vehicles emissions, but also to study their life-cycle. In case of inland navigation, the operation close to urban areas or in natural protected environments requires the adoption of a green propulsion. Moreover, especially for small crafts, the problem of ship disposal at the end of life is of high importance, even once plastic materials should be disposed, due to high costs and process complexities. For such a reason the design of a new generation green passenger craft requires the analysis and knowledge of multiple engineering fields, that could lead to a fast and successful design only by means of an integrated approach. In the present work, this approach will be applied to the design of a passenger craft, adopting an hybrid electric powering system and build with strip planking process for wooden ships. The description of the construction process will be here described together with the on-board electric power system. The integrated approach allowed also to directly evaluate the vessel operative profile and asses whether the vessel could perform a Zero Emission Mode navigation.