It is a global ambition to realize sustainable development goals (SDGs) by 2030 following the aspiring climate change and pollution alleviation, and thus, the notion of sustainable biorefinery has emerged as an indispensable asset for worldwide sustenance and economy. Animal derived materials are biopolymers that are produced in nature during the life cycles of animals and usually considered as versatile, biocompatible, non-toxic, stable, and cheap feedstock with a promising closed-loop life cycles in the industrial ecology of future materials. Such materials could produce a severe hazard to the environment and its occupants if not ditched appropriately. Conversely, animal derived wastes are complex molecules in which manifold structure and heterogeneous networks of inter- and intra-molecular clutches endure unresolved challenges to sustainable processing and purification of these valuable waste matrices into biomaterials with numerous applications. Utilizing ionic liquids (ILs), which are environmentally safe and recyclable alternatives to organic solvents, greatly facilitates the handling and processing of biopolymers obtained from animals. ILs have been used progressively for the use of biopolymers. Compared to customary techniques, ILs assisted processing of animal-based biopolymers is superior as ILs are noncorrosive, possess extremely low vapor pressure, exhibit high thermal solidity and superb dissolution capabilities under relatively moderate conditions. Currently, a broad spectrum of various techniques has been studied to further tune up the proficiency of ILs processing of animal derived biopolymers for sustainable product development. The primary aim of this review is to illustrate the latest advancements in technology wherein the ILs leverages as processing media for animal-based biopolymers for the manufacturing of a plethora of sustainable materials have been progressively recognized. In addition to examining how various ILs serve as solvents, reagents and/or (co)solvents, we also look at the larger process and system context in which the ILs are used. It is anticipated that the current review will infuse new thoughts and reconciliation in ILs-mediated processing of animal waste resources for a promising paradigm of sustainable biorefinery.

@en

The thermal kinetic modeling is crucial for development of sustainable processes where lignocellulosic fuels are a part of chemical system and their thermal degradation eventuates. In this paper, thermal decomposition of three lignocellulosic materials (bagasse, rice husk, and wheat straw) was obtained by the thermogravimetric (TG) technique and kinetics was analyzed by both model-fitting and isoconversional (model-free) methods to compare their effectiveness. Two models selected from each class include Arrhenius and Coats–Redfern (model-fitting), and Kissinger–Akahira–Sunose (KAS) and Flynn–Wall–Ozawa (FWO) (model-free). The formal model-fitting approach simulating the thermal decomposition of solids by assuming a fixed mechanism was found to be unduly facile. However, activation energy (E) values calculated from two model-fitting techniques were considerably different from each other with a percentage difference in the range of 1.36% to 7.65%. Particularly, both model-fitting methods predicted different reaction mechanism for thermal disintegration of lignocellulosic materials (two-dimensional diffusion (D2) by Arrhenius and one-dimensional diffusion (D1) by Coat–Redfern method). Conversely, the model-free routine offers a transformation of mechanism and activation energy values throughout reaction and is, therefore, more authentic to illustrate the complexity of thermal disintegration of lignocellulosic particles. Based on the model-free kinetic analysis, the lignocellulosic materials may be devised in following order of activation energy: rice husk > bagasse > wheat straw, by both KAS and FWO methods with a percentage difference no more than 0.84% for fractional conversion up to 0.7. Isoconversional approach could be recommended as more realistic and precise for modeling non-isothermal kinetics of lignocellulosic residues compared to model-fitting approach.

@en

Glycerol pretreatment is a promising method for the environmentally-friendly transformation of lignocellulosic materials into sustainable cellulose-rich raw materials (i.e., biopolymer) to fabricate biocomposites. Here, a comparison of aqueous acidified glycerol (AAG) pretreatment of wheat straw (WS) with alkaline, hot water, and dilute acid pretreatments on the thermal and mechanical characteristics of their fabricated composite board is presented. A comparison of total energy expenditure during WS pretreatment with AAG and other solutions was estimated and a comparative influence of AAG processing on lignocellulosic constituents and thermal stability of WS fiber was studied. Results imply that AAG pretreatment was superior in generating cellulose- rich fiber (CRF) as compared to other pretreatments and enhanced the cellulose contents by 90% compared to raw WS fiber. Flexural strength of acidic (40.50 MPa) and hot water treated WS composite (38.71 MPa) was higher compared to the value of 33.57 MPa for untreated composite, but AAG-treated composites exhibited lower values of flexural strength (22.22 MPa) compared to untreated composite samples. Conversely, AAG pretreatment consumed about 56% lesser energy for each kg of WS processed as compared to other pretreatments. These findings recognize that glycerol pretreatment could be a clean and new pretreatment strategy to convert agricultural waste into high-quality CRF as a sustainable raw material source for engineered biocomposite panels.

@en

Ionic liquids (ILs) are liquid salts at ambient or lower temperatures and consist of ions and short-lived ion pairs. They are potential alternatives to toxic, hazardous, highly flammable, and volatile solvents for preparing solutions, dispersions, gels, composites, and polymeric melts. ILs have some very interesting and unique characteristics like good chemical and thermal stability and very low vapor pressures. They have good solvation interactions with a wide range of organic, inorganic, and polymeric compounds. They can enhance colloidal stability and the elasticity range of polymers. ILs are environmental friendly, easily recyclable, and structurally similar to the conventional solvents. For optimal performance, it is necessary to fully understand the rheological properties of ILs and their different systems for academic interests such as understanding the ability of ILs as processing AIDS particularly in film casting, fiber spinning and spraying, comprehension of thermodynamics and dynamics of polymer chains in ILs, analyzing the hydrodynamic volume of dispersed polymer, polymer-ILs interactions, characterizing the viscoelastic properties and nanophase-ILs interactions in nanocomposite systems, analyzing the plasticization efficiency, and the final properties of the composite system. The rheological analysis is also important for industrial purposes particularly for designing processing techniques and suitable operating conditions for IL based systems. The aim of this review is to give an overview of the rheological properties of pure ionic liquids and solutions, dispersions, gels, composites, and melts based on ionic liquids.@en

A primitive element for the development of sustainable pyrolysis processes is the study of thermal degradation kinetics of lignocellulosic waste materials for optimal energy conversion. The study presented here was conducted to predict and compare the optimal kinetic parameters for pyrolysis of various lignocellulosic biomass such as wood sawdust, bagasse, rice husk, etc., under both isothermal and non-isothermal conditions. The pyrolysis was simulated over the temperature range of 500–2400 K for isothermal process and for heating rate range of 25–165 K/s under non-isothermal conditions to assess the maximum pyrolysis rate of virgin biomass in both cases. Results revealed that by increasing the temperature, the pyrolysis rate was enhanced. However, after a certain higher temperature, the pyrolysis rate was diminished which could be due to the destruction of the active sites of char. Conversely, a decrease in the optimum pyrolysis rate was noted with increasing reaction order of the virgin biomass. Although each lignocellulosic material attained its maximum pyrolysis rate at the optimum conditions of 1071 K and 31 K/s for isothermal and non-isothermal conditions, respectively, but under these conditions, only wood sawdust exhibited complete thermal utilization and achieved final concentrations of 0.000154 and 0.001238 under non-isothermal and isothermal conditions, respectively.

@en