The evolution of the particle size distribution and the surface composition of silicon carbide and titanium carbide nanoparticle (NP) dispersions were studied. The pre-dispersions were prepared using two commonly used protocols for dispersion: stirring and sonication. Two dispersants were investigated (water and Pluronic F108 1 %) at two stages: predispersion and during in vitro assays. Our data show that for each tested condition, different time-dependent results for the surface chemical composition as well as size and percentage of the agglomerates and the primary particles are observed. De-agglomeration and successive or simultaneous cleaning-wrapping cycles of the nanomaterial are observed and are related to the dispersion method and the medium as well as to the chemical stability of the NP surface. Biological response during in vitro assessment was also performed for one given pre-dispersion time condition and demonstrates that the preparation method significantly alters the results.@en

Multi-walled carbon nanotubes (MWCNTs) were dispersed in water and in a Pluronic F108 solution by four different dispersion methods (stirring, bath sonication, stirring followed by bath sonication, and sonication probe). The effect of the dispersion methods were evaluated in terms of the particle size distribution, the agglomerates size, and the exfoliated fraction produced, as well as in terms of the surface and bulk chemical composition. Energy dispersive X-ray, X-ray photoelectron spectroscopy, and centrifugal liquid sedimentation techniques were used to characterize pristine MWCNTs and their dispersion. It is shown that, irrespective of the dispersion methods used, the MWCNTs are strongly wrapped with the biocompatible surfactant Pluronic F108, thereby modifying the external surface of the MWCNTs. Some shortening of MWCNTs and more wrapping are also observed when sonication methods are used. These observations raise questions as to the validity of results obtained in toxicology tests, in vitro and in vivo, were such methods of dispersion procedures are used.@en