When identifying electrical, mechanical, or biological systems, parametric continuous-time identification methods can lead to interpretable and parsimonious models when the model structure aligns with the physical properties of the system. Traditional linear system identification may not consider the most parsimonious model when relying solely on unfactored transfer functions, which typically result from standard direct approaches. This paper presents a novel identification method that delivers additive models for both open and closed-loop setups. The estimators that are derived are shown to be generically consistent, and can admit the identification of marginally stable additive systems. Numerical simulations show the efficacy of the proposed approach, and its performance in identifying a modal representation of a flexible beam is verified using experimental data.

@en

Accurately modeling nonlinearities is becoming increasingly important for mechanical systems, particularly in the context of system design, model-based control and monitoring systems for fault diagnosis. In the nonlinear modeling process, a pivotal phase involves pinpointing the physical locations and quantifying the magnitude of nonlinearities. This paper introduces a data-driven approach for nonlinearity location and quantification by analyzing nonparametric frequency response functions. To achieve this objective, measurement locations in mechanical systems are interpreted as nodes arranged in a dynamic network, and linearization techniques are employed on the frequency response functions formed from node to node. The efficacy of the proposed approach and the concept of nonlinearity localization and quantification are illustrated by numerical simulations and experiments on a flexible beam setup.

@en

Block coordinate descent is an optimization technique that is used for estimating multi-input single-output (MISO) continuous-time models, as well as single-input single output (SISO) models in additive form. Despite its widespread use in various optimization contexts, the statistical properties of block coordinate descent in continuous-time system identification have not been covered in the literature. The aim of this letter is to formally analyze the bias properties of the block coordinate descent approach for the identification of MISO and additive SISO systems. We characterize the asymptotic bias at each iteration, and provide sufficient conditions for the consistency of the estimator for each identification setting. The theoretical results are supported by simulation examples.

@en

Cross-coupled iterative learning control (ILC) can improve the contour tracking performance of manufacturing systems significantly. This paper aims to develop a framework for norm-optimal cross-coupled ILC that enables intuitive tuning of time- and iteration-varying weights of the exact contour error and its tangential counterpart. This leads to an iteration-varying ILC algorithm for which convergence conditions are developed. In addition, a resource-efficient implementation is developed that reduces the computational load significantly and enables the use of long reference signals. The approach is experimentally validated on an industrial flatbed printer.

@en

The performance of fault detection filters relies on a high sensitivity to faults and a low sensitivity to disturbances. The aim of this paper is to develop an approach to directly shape these sensitivities, expressed in terms of minimum and maximum singular values. The developed method offers an alternative solution to the H_-/H_∞ synthesis problem, building upon traditional multiobjective synthesis results. The result is an optimal filter synthesized via iterative convex optimization and the approach is particularly useful for fault diagnosis as illustrated by a numerical example.

@en

The condition of mechatronic production equipment slowly deteriorates over time, increasing the risk of failure and associated unscheduled downtime. A key indicator for an increased risk for failures is the shifting of resonances. The aim of this paper is to track the shifting resonances of the equipment online and during normal operation. This paper contributes to real-time parametric fault diagnosis by applying and comparing parameter estimators in this new context, highly relevant for next-generation mechatronic systems. The proposed fault diagnosis systems consist of recursive least squares algorithms and the effectiveness is illustrated on an overactuated and oversensed flexible beam setup, allowing to artificially manipulate its effective resonances in a controlled manner.

@en

Cross-coupled iterative learning control (ILC) can achieve high performance for manufacturing applications in which tracking a contour is essential for the quality of a product. The aim of this paper is to develop a framework for norm-optimal cross-coupled ILC that enables the use of exact contour errors that are calculated offline, and iteration-and time-varying weights. Conditions for the monotonic convergence of this iteration-varying ILC algorithm are developed. In addition, a resource-efficient implementation is proposed in which the ILC update law is reframed as a linear quadratic tracking problem, reducing the computational load significantly. The approach is illustrated on a simulation example.@en