Since 2021, national standards of South Korea for industrial wastewater discharge to surface water have changed from chemical oxygen demand to total organic carbon for the organic matter. Conventional organic matter parameters (e.g., biochemical oxygen demand, chemical oxygen demand and total organic carbon) are limited means of understanding the behavior of dissolved organic matter in industrial wastewater treatment processes. Thus, the current study used advanced dissolved organic matter characterization tools (e.g., fluorescence excitation emission matrix and size exclusion chromatography-organic carbon detection) to scrutinize industrial wastewater characteristics from three full-scale industrial wastewater treatment plants (IWTPs). The tools were conducive to tracking industrial wastewater sources of total organic carbon, influencing the overall performance of IWTPs, and proposing alternative processes to lower total organic carbon concentration in the effluent. The results of this study suggest that the diagnosis of IWTPs based on dissolved organic matter characteristics could be a useful tool for providing more insight into total organic carbon management.

From 2022, industrial wastewater discharge regulations in South Korea will replace chemical oxygen demand (COD_Mn) with total organic carbon (TOC). A shift from COD_Mn to TOC is a pioneering change in protecting water bodies from organic contaminants. However, several industries are struggling to meet these TOC requirements even though their effluents met the COD_Mn limits. Effluent COD_Mn/TOC ratios (1.28 ± 0.64) found in our study were lower than the COD_Mn/TOC coefficients (1.33–1.80) suggested by the Ministry of Environment in South Korea. Aliphatic and particulate organic matter contents in effluents likely influenced the COD_Mn/TOC ratio. Regardless of the industrial category, dissolved organic carbon often consists of low molecular weight neutrals, hydrophobic organic carbon, and protein-like substances in raw and treated industrial wastewaters. The present study also revealed that TOC and COD_Mn represented different organic matter fractions in the paper mill and oil refinery wastewater, whereas the industrial park wastewater showed similar dissolved organic matter characteristics. Specifically, COD_Mn was effective in the determination of humic content in paper mill wastewater but was underestimated in oil refinery wastewater. Additionally, only paper mill effluents exceeded the TOC requirements (4 of 6 samples) and required an additional post-treatment process owing to higher organic loads.

Biofilm formation on membrane surfaces causes many operational problems such as a decrease in permeate flux and an increase in hydraulic resistance. In this study, the ability of bacteria to pass through microfiltration (MF) membranes and the growth potential of microfilterable bacteria were investigated in order to understand biofouling in MF-reverse osmosis (RO) integrated membrane systems. Growth of microfilterable bacteria in MF permeate was observed, indicating that not all MF membranes can guarantee the total rejection of bacteria. Changes in natural organic matter (NOM) characteristics and growth potential of bacteria during the treatment process are important factors in the occurrence of biofilm development in water treatment systems. Analysis of protein-like and humic-like substances in NOM of two successive RO stages revealed an increase in the concentrations of both biopolymers and humic substances of RO concentrates. Unexpectedly, the use of antiscalants was seen to enhance the growth of bacteria in the RO feed water in this study. Bacterial 16s rRNA pyrosequencing revealed that passing source water through the MF membranes dramatically changed bacterial community structure. The bacterial communities that passed through the MF steps primarily belonged to the family Comamonadaceae. However, several bacteria groups including Flavobacteriaceae, Sphingobacteriaceae and Sphingomonadaceae selectively composed the biofilm community formed on the RO membranes. Thus, understanding the selectivity and filterability of MF towards microorganisms involved in biofouling on RO membrane surfaces is crucial for the improvement of membrane-related operational processes.

The influences of natural organic matter (NOM) and bacteriological characteristics on the biological stability of water were investigated in a full-scale drinking water treatment plant. We found that prechlorination decreased the hydrophobicity of the organic matter and significantly increased the high-molecular-weight (MW) dissolved organic matter, such as biopolymers and humic substances. High-MW organic matter and structurally complex compounds are known to be relatively slowly biodegradable; however, because of the prechlorination step, the indigenous bacteria could readily utilise these fractions as assimilable organic carbon. Sequential coagulation and sedimentation resulted in the substantial removal of biopolymer (74%), humic substance (33%), bacterial cells (79%), and assimilable organic carbon (67%). Rapid sand and granular activated carbon filtration induced an increase in the low-nucleic-acid content bacteria; however, these bacteria were biologically less active in relation to enzymatic activity and ATP. The granular activated carbon step was essential to securing biological stability (the ability to prevent bacterial growth) by removing the residual assimilable organic carbon that had formed during the ozone treatment. The growth potential of Escherichia coli and indigenous bacteria were found to differ in respect to NOM characteristics. In comparison with E. coli, the indigenous bacteria utilised a broader range of NOM as a carbon source. Principal component analysis demonstrated that the measured biological stability of water could differ, depending on the NOM characteristics, as well as on the bacterial inoculum selected for the analysis.