Understanding pore-scale flow and transport processes is important for understanding flow and transport within rocks on a larger scale. Flow experiments on small-scale micromodels can be used to experimentally investigate pore-scale flow. Current manufacturing methods of micromodels are costly and time consuming. 3D printing is an alternative method for the production of micromodels. We have been able to visualise small-scale, single-phase flow and transport processes within a 3D printed micromodel using a custom-built visualisation cell. Results have been compared with the same experiments run on a micromodel with the same geometry made from polymethyl methacrylate (PMMA, also known as Perspex). Numerical simulations of the experiments indicate that differences in experimental results between the 3D printed micromodel and the Perspex micromodel may be due to variability in print geometry and surface properties between the samples. 3D printing technology looks promising as a micromodel manufacturing method; however, further work is needed to improve the accuracy and quality of 3D printed models in terms of geometry and surface roughness.

Three-dimensional (3-D) printing provides a fast, cost-effective way to produce and replicate complicated designs with minimal flaws and little material waste. Early use of 3-D printing for engineering applications in the petroleum industry has stimulated further adoption by geoscience researchers and educators. Recent progress in geoscience is signified by capabilities that translate digital rock models into 3-D printed rock proxies. With a variety of material and geometric scaling options, 3-D printing of nearidentical rock proxies provides a method to conduct repeatable laboratory experiments without destroying natural rock samples. Rock proxy experiments can potentially validate numerical simulations and complement existing laboratory measurements on changes of rock properties over geologic time scales. A review of published research from academic, government, and industry contributions indicates a growing community of rock proxy experimentalists. Three-dimensional printing techniques are being applied to fundamental research in the areas of multiphase fluid flow and reactive transport, geomechanics, physical properties, geomorphology, and paleontology. Further opportunities for geoscience research are discussed. Applications in education include teaching models of terrains, fossils, and crystals. The integration of digital data sets with 3-D printed geomorphologies supports communication for both societal and technical objectives. Broad benefits that could be realized from centralized 3-D printing facilities are also discussed.