In this study, the impact of water-to-cement (w/c) ratios of belite calcium sulfoaluminate cement (BCSA) on the hydration kinetics and the electrochemical impedance spectroscopy (EIS) parameters is studied. According to the analysis of classic hydration measurements, such as calorimetry tests, chemical shrinkage content, and chemically bound water content, it can be concluded that a higher w/c ratio clearly accelerates the hydration of BCSA cement paste. The electrical resistivity of BCSA0.35 cement paste is more than 4.5 times that of BCSA0.45 and BCSA0.5, due to the gradually densified micropore structure blocking the electrical signal transmission rather than the free charged-ion content. The porosity of BCSA0.5 is 27.5% higher than that of BCSA0.35 and 7.8% higher than that of BCSA0.45, which proves the resistivity is clearly related to the variation in microstructure, especially for the porosity and pore size distribution. The novelty of this study is the linear regression with logarithm terms of electrical resistivity and classic hydration parameters such as chemical shrinkage, cumulative hydration heat, and chemically bound water is established to extend the classical expression of cement hydration degree. It indicates that the electrochemical impedance spectroscopy can be taken as a nondestructive testing measurement to real-time monitor the cement hydration process of cement-based materials.@en

Operation and maintenance (O&M) costs account for a large proportion of the total costs for offshore wind energy. Performing a reasonable maintenance strategy is an effective approach to reduce O&M costs and gain more profits. In this paper, an opportunistic maintenance strategy for offshore wind turbine systems considering maintenance intervals of each subsystem is proposed to minimize the total maintenance cost. First, a Non-homogeneous Continuous-Time Markov Process based state transition model is established to study degradation process of subsystems. The influence of maintenance time schedule on the maintenance cost is studied to obtain the optimal maintenance intervals of each subsystems. Then, an opportunistic maintenance model considering economic dependencies between multiple subsystems is proposed to optimize the maintenance strategy by combining maintenance activities of individual subsystems to a grouping maintenance activity. A numerical example is used to indicate the significant effectiveness of the maintenance model. The result shows that the total maintenance cost of an offshore wind turbine system will be reduced by adopting the opportunistic maintenance strategy when compared with conventional preventive maintenance strategy.

@en

Identification of protein complex is very important for revealing the underlying mechanism of biological processes. Many computational methods have been developed to identify protein complexes from static protein-protein interaction (PPI) networks. Recently, researchers are considering the dynamics of protein-protein interactions. Dynamic PPI networks are closer to reality in the cell system. It is expected that more protein complexes can be accurately identified from dynamic PPI networks. In this paper, we use the undulating degree above the base level of gene expression instead of the gene expression level to construct dynamic temporal PPI networks. Further we convert dynamic temporal PPI networks into dynamic Temporal Interval Protein Interaction Networks (TI-PINs) and propose a novel method to accurately identify more protein complexes from the constructed TI-PINs. Owing to preserving continuous interactions within temporal interval, the constructed TI-PINs contain more dynamical information for accurately identifying more protein complexes. Our proposed identification method uses multisource biological data to judge whether the joint colocalization condition, the joint coexpression condition, and the expanding cluster condition are satisfied; this is to ensure that the identified protein complexes have the features of colocalization, coexpression, and functional homogeneity. The experimental results on yeast data sets demonstrated that using the constructed TI-PINs can obtain better identification of protein complexes than five existing dynamic PPI networks, and our proposed identification method can find more protein complexes accurately than four other methods.

@en

Identifying protein complexes in static protein-protein interaction (PPI) networks is essential for understanding the underlying mechanism of biological processes. Proteins in a complex are co-localized at the same place and co-expressed at the same time. We propose a novel method to identify protein complexes with the features of joint co-localization and joint co-expression in static PPI networks. To achieve this goal, we define a joint localization vector to construct a joint co-localization criterion of a protein group, and define a joint gene expression to construct a joint co-expression criterion of a gene group. Moreover, the functional similarity of proteins in a complex is an important characteristic. Thus, we use the CC-based, MF-based, and BP-based protein similarities to devise functional similarity criterion to determine whether a protein is functionally similar to a protein cluster. Based on the core-attachment structure and following to seed expanding strategy, we use four types of biological data including PPI data with reliability score, protein localization data, gene expression data, and gene ontology annotations, to identify protein complexes. The experimental results on yeast data show that comparing with existing methods our proposed method can efficiently and exactly identify more protein complexes, especially more protein complexes of sizes from 2 to 6. Furthermore, the enrichment analysis demonstrates that the protein complexes identified by our method have significant biological meaning.@en