The present study describes the thermodynamic assessment of three pseudo-binary systems relevant to CsI solubility in molten iodide salts: KI-CsI, NaI-CsI, and NaF-CsI. The motivation for this study was to corroborate a single previously reported data set of the NaI-CsI system, resolve inconsistencies reported by two different data-sets of the KI-CsI system, and generate new experimental data on the NaF-CsI system. Equilibrium data for all systems were obtained using Differential Scanning Calorimetry. Thermodynamic treatments of the three pseudo-binary systems were revised using the CALPHAD method with the thermodynamic software FactSage and Thermochimica. Both experimental and computational investigations provide increased confidence in the thermochemical behaviour of CsI in Molten Salt Reactor nuclear systems.

The Thermodynamics of Advanced Fuels – International Database (TAF-ID) was developed using the Calphad method to provide a computational tool to perform thermodynamic calculations on nuclear fuel materials under normal and off-normal conditions. Different kinds of fuels are considered: oxide, metallic, carbide and nitride fuels. Many fission products are introduced as well as structural materials (e.g., zirconium, steel, concrete, SiC) and absorbers (e.g., B₄C), in order to investigate the thermochemistry of irradiated fuels and to predict their chemical interaction with the surrounding materials. The approach to develop the database and the models implemented in the database are described. Examples of models for key chemical systems are presented. Finally, a few examples of application calculations on severe accidents with UO₂ fuels, irradiated fuel chemistry of MOX and metallic fuels and metallic fuel/cladding interaction show how this tool can be used. To validate the database, the calculations are compared to the available experimental data. A good agreement is obtained which gives confidence in the maturity degree and quality of the TAF-ID database. The working version is only accessible to the participants of the TAF-ID project (Canada, France, Japan, the Netherlands, Republic of Korea, United Kingdom, USA). A public version is accessible by all the NEA countries. The current version contains models on the Am–Fe, Am–Np, Am-O-Pu, Am–U, Am–Zr, C–O–U-Pu, Cr–U, Np–U, Np–Zr, O–U–Zr, Re–U, Ru–U, Si–U, Ti–U, U-Pu-Zr, U–W systems. It is progressively extended with our published assessments. Information on how to join the project is available on the website: https://www.oecd-nea.org/science/taf-id/.