In the last two decades, the province of Groningen, located in the North-East of the Netherlands, has been subjected to an increasing number of earthquakes induced by gas extractions. The existing building stock is mainly composed by unreinforced masonry (URM) buildings not conceived to resist seismic loads. The need of reducing the vulnerability of these buildings by means of retrofit interventions, led to the development and adoption of a new guideline (NPR9998:2018). As regards the seismic assessment of URM buildings using nonlinear static analysis, the guideline includes significant differences with respect to Eurocode 8, which is adopted in other European countries. The more significant differences lay in the description of failure mechanisms and constitutive laws of piers and spandrels, in the identification of limit states and in the calculation of seismic demand. In the last years, the assessment and retrofit in the region has been carried out using software based on an equivalent-frame strategy: among these, the 3Muri software has been widely adopted. The solver of this program is the research software TREMURI. In this work, a new version of the solver adopted by the software 3Muri, complying with the requirements of the new Dutch guideline, was developed; the tool was then validated with simple examples. To illustrate the specificities of the new guideline, the seismic assessment of a building representative of one of the most widely diffused URM building typologies in the area was performed.@en

In this paper, a dataset collecting the results of in-plane cyclic tests on unreinforced masonry piers, carried out within different research projects, is presented. The dataset includes brick and block walls with different materials, bed-and head-joint typologies, dimensions, boundary conditions and vertical applied loads. The development of such dataset aims at providing a tool for the improvement of the understanding and the evaluation of the main parameters that may influence and govern the lateral response of the URM piers under seismic excitation. A preliminary investigation on the in-plane lateral strength and displacement capacity, being two of the most significant parameters used in seismic analyses for the design and assessment of masonry buildings, has been proposed. The dataset, that already groups several specimens, is freely shared and might be continuously updated. This source of information of consistent and reliable test results represents a necessary step into the process of definition of shared rules within the scientific and technical community, in particular for the improvement of codified criteria, analytical and numerical models and testing procedures.

@en

The lateral resistance represents one of the most significant wall parameters to be used in the seismic analyses for the design/assessment of masonry buildings. In this article, an investigation on in-plane lateral strength of URM piers has been proposed thorough a comparison between the results from codified criteria and the outcomes of several experimental in-plane cyclic tests on masonry walls. In this context, a new database collecting the results of in-plane cyclic tests on unreinforced masonry piers, carried out within different research projects, has been devel-oped. The database consists of walls with bricks and blocks with different masonry materials (clay, lightweight aerated concrete, AAC, calcium silicate), bed-and head-joint typologies, di-mensions, boundary conditions, vertical applied loads and horizontal loading history. This source of information of consistent and reliable test results represents a necessary step into the process of definition of shared rules in the European context.@en

In this paper, a database collecting the results of 188 in-plane cyclic tests on unreinforced masonry piers with bricks and blocks, constituted of different masonry materials, bed- and head-joint typologies, dimensions, boundary conditions, applied vertical loads and horizontal loading history, is presented. The database, which will be freely shared, is organized in eight sections regarding general information and reference, information on masonry type, units and mortar, information on masonry walls, test conditions, estimated lateral resistances, experimental results of the cyclic tests, parameters of the bilinear curves and drift capacities. A preliminary investigation on the in-plane displacement capacity of the walls is also proposed since it represents one of the main parameter to be used in the global seismic analyses for the design/assessment of masonry buildings. Particular attention has been dedicated to the evaluation of the displacement capacity at different limit states in relation with European codes. Although the database, at the present stage, already contains several specimens, it will be continuously updated since this source of information of consistent and reliable test results represents a necessary step into the process of definition of shared rules in the European context, with particular reference to the definition of specific performance limit states and related capacity models for the in-plane seismic response of structural masonry walls. Keywords: URM piers; bricks and blocks; in-plane cyclic tests; database; displacement capacity @en