Person | TU Delft Repository

Hardness, melting reactions and heat treatment of Al-Si-Cu-Mg alloys reinforced with aluminiumoxide particles

Conference paper (1992) - M.J. Starink, V. Jooris, P. van Mourik

Precipitation in a solid-quenched, particle-reinforced Al-Si-Cu-Mg alloy

Conference paper (1991) - M.J. Starink, V. Jooris, P. van Mourik

A calorimetric study of precipitation in an Al-Cu alloy with silicon particles

Journal article (1991) - M.J. Starink, P. van Mourik

Note on relaxation of cooling induced strains in two-phase AlSi-alloys at room temperature

Journal article (1991) - JGM van Berkum, R. Delhez, Th.H de Keijser, EJ Mittemeijer, P. van Mourik

Precipitatieverschijnselen en spanningseffecten in geavanceerde aluminiumlegeringen

Journal article (1990) - P. van Mourik, M van Rooijen

A comparative study on heat effects in an Al-Cu alloy reinforced with silicon particles and in a binary Al-Cu alloy

Conference paper (1990) - M.J. Starink, P. van Mourik

Precipitation effects in an aluminium-copper alloy reinforced with silicon particles

Conference paper (1989) - M.J. Starink, P. van Mourik, BM Korevaar

Precipitation in liquid-quenched Al-Mg alloys; a study by use of X-ray diffraction line shift and line broadening

Journal article (1989) - P. van Mourik, N.M. Maaswinkel, Th.H de Keijser, EJ Mittemeijer

On misfit-induced lattice spacing variations in two-phase-alloys: the case of cooling-induced microstrains in the Al-matrix of fully aged AlSi alloys

Journal article (1988) - P. van Mourik, Th.H de Keijser, N.M. van der Pers, EJ Mittemeijer

Ageing of liquid-quenched and solid-quenched aluminium base alloys; analysis of lattice parameter variations

Doctoral thesis (1988) - P. van Mourik

Kinetics of precipitation and of relaxation of precipitation-induced stresses in aluminium-silicon alloys

Journal article (1987) - P. van Mourik, Th.H de Keijser, EJ Mittemeijer

Misfit strains and excess vacancies in liquid-quenched and solid-quenched AlSi alloys on aging

Abstract (1986) - P. van Mourik, Th.H de Keijser, EJ Mittemeijer

Excess vacancies in rapidly quenched aluminium alloys

Abstract (1985) - P. van Mourik, Th.H de Keijser, EJ Mittemeijer

Precipitation of silicon in a solid-quenched aluminium-silicon (1.3 at%) alloy studied by position annihilation

Journal article (1984) - D Seegers, P. van Mourik, MH van Wijngaarden, BM Rao

Rapidly solidified (melt-spun) aluminium alloys: morphology, texture and excess vacancies

Poster (1984) - P. van Mourik, M van Rooijen, N.M. van der Pers, Th.H de Keijser, EJ Mittemeijer

Consolidation and resulting tensile strength of melt-spun AlMg and AlSi alloys

Poster (1984) - M van Rooijen, J van der Hoeven, L. Katgerman, P. van Mourik, Th.H de Keijser, EJ Mittemeijer

Structural and compositional variations in aluminium alloys rapidly quenched from the melt

Journal article (1983) - J van der Hoeven, P. van Mourik, EJ Mittemeijer

On precipitation in rapidly solidified aluminium-silicon alloys

Journal article (1983) - P. van Mourik, EJ Mittemeijer, Th.H de Keijser

Structural inhomogenaties of AlSi alloys rapidly quenched from the melt

Journal article (1982) - R. Delhez, Th.H de Keijser, EJ Mittemeijer, P. van Mourik, N.M. van der Pers, L. Katgerman, WE Zalm

Unusual lattice parameters in two-phase systems after annealing

Journal article (1981) - EJ Mittemeijer, P. van Mourik, Th.H de Keijser

P. van Mourik

Authored