We propose a new modeling strategy based on hybrid elements for virtual fiber modeling (also known as the digital element method) to predict both kinematics as well as mechanics of woven fabrics. In virtual fiber modeling, yarns are modeled consisting of a number of discrete fibers. We show that through the development of a modeling strategy based on hybrid elements, we are able to impose correct properties in the fiber direction, as well as out-of-plane properties thanks to the inclusion of fiber bending stiffness. This approach accurately predicts the through thickness compression of a 2x2 twill glass fiber woven fabric. Both kinematically, as well as mechanically, good agreement between experiment and simulation is obtained. Ultimately, these kinds of models could allow faster virtual prototyping as the amount of experimental input is very low and can usually be found in the datasheet. @en

The through-thickness compressive behavior of fabric reinforcements is crucial in liquid composite molding manufacturing processes. Predictive simulations of the compressive response are thus necessary to enable a virtual processing workflow. These are complex however, as the compressive behavior of the reinforcement fabrics is non-linear. Altough virtual fiber modeling has proven to be a strong kinematical tool, it cannot predict the compressive response due to the lack of bending stiffness in the virtual fibers. Here, we describe a solution that enables predictive compressive simulations through hybrid virtual fibers. It is based on an overlay mesh-element technique, combining both (i) finite elements that determine the in-plane fiber properties as well as (ii) finite elements that determine out-of-plane fiber bending. Using these hybrid virtual fibers, the through-thickness compression of a twill woven fabric ply is simulated and experimentally validated using both μCT-based as compliance-based measurements. Excellent agreement between simulation and experiment is obtained for the right set of input parameters.

@en