The PISA Joint Industry Research Project was concerned with the development of improved design methods for monopile foundations in offshore wind applications. PISA involved large-scale pile tests in overconsolidated glacial till at Cowden, north-east England, and in dense, normally consolidated marine sand at Dunkirk, northern France. This paper describes the experimental set-up for pile testing, with unique features of load-application mechanisms and built-in fibre optic strain gauges. New procedures are described for the interpretation of pile loading data, and specifically for providing precise interpretation of pile displacements.

@en

The PISA project explored the development of improved design methods for offshore wind turbine monopile foundations. Medium scale field pile testing for the project took place at Cowden in the UK, where the soil consists of a heavily over-consolidated glacial till, and Dunkirk in France, where the soil consists of a dense marine sand. The main focus of the testing was on monotonic capacity. However, results were also obtained for cyclic loading tests on medium scale piles of two different diameters (0.762 m and 2.0 m), and a length to diameter (L/D) ratio of 5.25. The testing consisted of uniform one-way cycling on 7 separate piles across the two sites at different amplitudes, including tests of over 20000 cycles, as well as two-way cycling on one pile at each site at different amplitudes and frequencies. The one-way tests explored ratcheting phenomena and associated effects, whilst the two-way tests explored stiffness and damping at increasing load amplitudes. This paper presents a summary of the cyclic pile tests that were completed, illustrated by results from the Dunkirk site. Comparisons are made to the PISA monotonic test results, as well as to observations from model testing reported in the literature. These field measurements support the development of new cyclic modelling approaches for offshore monopile foundations.@en

The results obtained from a field testing campaign on laterally loaded monopiles, conducted at a dense sand site in Dunkirk, northern France are described. These tests formed part of the PISA project on the development of improved design methods for monopile foundations for offshore wind turbines. Results obtained from monotonic loading tests on piles of three different diameters (0·273 m, 0·762 m and 2·0 m) are presented. The piles had length-to-diameter ratios (L/D) of between 3 and 10. The tests consisted principally of the application of monotonic loads, incorporating periods of held constant load to investigate creep effects. The influence of loading rate was also investigated. Data are presented on the overall load-displacement behaviour of each of the test piles. Measured data on bending moments and inclinations induced in the piles are also provided. Inferences are made for the displacements in the embedded length of the piles. These field data will support the development of a new one-dimensional modelling approach for the design of monopile foundations for offshore wind turbines. They also form a unique database of field measurements in a dense sand, from lateral loading of piles at a vertical distance above the ground surface.

@en

This paper describes the results obtained from a field testing campaign on laterally loaded monopiles conducted at Cowden, UK, where the soil consists principally of a heavily overconsolidated glacial till. These tests formed part of the PISA project on the development of improved design methods for monopile foundations for offshore wind turbines. Results obtained for monotonic loading tests on piles of three different diameters (0·273 m, 0·762 m and 2·0 m) are presented. The piles had length-to-diameter ratios (L/D) of between 3 and 10. The tests included the application of monotonic loading incorporating periods of constant load to investigate creep effects, and investigations on the influence of loading rate. Data are presented on measured bending moments and inclinations induced in the piles. Inferred data on lateral displacements of the embedded section of the piles are determined using an optimised structural model. These field data support the development of a new one-dimensional modelling approach for the design of monopile foundations for offshore wind turbines. They also form a unique database of field measurements in an overconsolidated clay, from lateral loading of piles at a vertical distance above the ground surface.

@en