This work reports the analysis of the time-resolved photoluminescence behaviour on the nanosecond and microsecond time scale of fourteen historical and contemporary titanium white pigments. The pigments were produced with different production methods and post-production treatments, giving rise to a remarkable variability of titanium dioxide powders and, in some cases, to the formation of a complex surface of the crystal agglomerates. The pigments have been further characterized by Raman spectroscopy, scanning transmission electron microscopy coupled with energy dispersive X-ray spectroscopy and inductively coupled plasma atomic emission spectrometry. Our study provides a clear view of the main features of the photoluminescence (PL) emission of anatase- and rutile-based pigments. For both the polymorphs of titanium dioxide the room-temperature photoluminescence emission is complex and involves different relaxation paths, related to shallow levels close to the conduction bands and mid-gap trap states. The PL behaviour appears to be little affected by post-production treatments such as organic and inorganic coatings. Instead, the presence of niobium impurities in the TiO₂ crystal lattice, as residues of the sulphate synthesis process, induce a remarkable quenching of the visible emission of anatase-based pigments. We confirm that rutile-based and anatase-based pigments are significantly different in terms of photoluminescence behaviour. This clear distinction is a valuable point for non-invasive pigment identification by in-situ photoluminescence spectroscopy. In particular, while many organic binding media emit in the visible region, the near-infrared emission of rutile is specific and can likely be used to identify the pigment in more complex materials as paints. This research paves the way to future studies of the photo-physical properties of titanium white pigments, which is imperative to understand the risk of degradation induced by the well-known photocatalytic activity of this widely used 20^th century pigment.

As linseed oil has a longstanding and continuing history of use as a binder in artistic paints, developing an understanding of its degradation mechanism is critical to conservation efforts. At present, little can be done to detect the early stages of oil paint deterioration due to the complex chemical composition of degrading paints. In this work, we use advanced infrared analysis techniques to investigate the UV-induced deterioration of model linseed oil paints in detail. Subdiffraction limit infrared analysis (AFM-IR) is applied to identify and map accelerated degradation in the presence of two different grades of titanium white pigment particles (rutile or anatase TiO₂). Differentiation between the degradation of these two formulations demonstrates the sensitivity of this approach. The identification of characteristic peaks and transient species residing at the paint surface allows infrared absorbance peaks related to degradation deeper in the film to be extricated from conventional ATR-FTIR spectra, potentially opening up a new approach to degradation monitoring.