Within this research, a one-stage hybrid dual internal circulation airlift A2O (DCAL-A2O) bioreactor was designed and operated to simultaneously remove carbon, nitrogen and phosphorous (CNP) from milk processing wastewater (MPW) in different operational circumstances. The substantial operating variables monitored in this work were including hydraulic retention time (HRT), airflow rate (AFR) and aeration volume ratio (AVR) ranged from 7 to 15 h, 1–3 L/min and 0.324–0.464, respectively. From the view point of economics and process function, the optimum conditions were obtained at the HRT, AFR and AVR of 10 h, 2 L/min and 0.464, respectively. At the optimum conditions TCOD, TN, TP removal efficiencies and effluent turbidity were reported to be 97 %, 90 %, 92 % and 9 NTU, respectively. The impact of wastewater biodegradability (BOD5/COD) was evaluated on the bioreactor performance using two other wastewaters i.e. soft drink (SDW) and soybean oil plant wastewaters (SOW) in comparison with the MPW. Removal efficiencies for TCOD and TN exceeding 80 % were observed. The feeding location revealed a prominent impact on the TN and phosphorous removal efficiencies (both ≥80 %) related to the availability degree of the readily biodegradable organic substrate to denitrifiers and PAOs. The rise in HRT, AFR and AVR resulted in reducing microbial secretions as SMP present in sludge and bioreactor effluent as well as loosely bounded EPS (LB-EPS), reported to be 26, 28, 32.5 and 194.4 mg/L TOC, respectively. Different bacteria species were present at optimum conditions confirming concurrent CNP removal in a single body. Finally, the operating cost evaluation verified the effectiveness of the hybrid airlift A2O treating the MPW.@en

The objective of this study was to treat different types of industrial wastewaters (milk processing wastewater, soft drink wastewater, and soybean oil plant wastewater) using modified configurations of a bioreactor called one-stage internal dual circulation airlift A2O (DCAL-A2O) bioreactor. The modification involved the use of physical barriers (baffle and packing media) to enhance the anoxic zone of the bioreactor. The study investigated the performance of bioreactors in simultaneously removing carbon, nitrogen, and phosphorus. The bioreactor was designed in three configurations: ordinary, baffled, and hybrid DCAL-A2O bioreactors, depending on the type of manipulation. Different operating conditions, such as hydraulic retention time (HRT), air flow rate (AFR), and anaerobic volume ratio (AVR), were examined simultaneously. The hybrid DCAL-A2O bioreactor was found to be highly suitable for wastewater treatment due to its superior biological performance, ease of operation, and cost-effectiveness when compared to two other bioreactors. The chosen bioreactor demonstrated high performance in terms of TCOD, TN, phosphorus removal efficiencies, and effluent turbidity. Specifically, it achieved removal efficiencies of 97.0% for TCOD, 92% for TN (with a concentration of 179.4 mg/L), 90% for phosphorus (with a concentration of 50.33 mg/L), and an effluent turbidity of 9 NTU. These results were obtained under optimal conditions, which included a HRT of 10 h, an AFR of 2 L/min, and an AVR of 0.464. The unique setup of the bioreactor demonstrated its undeniable ability to effectively treat wastewater from different feeding points. PCR tests confirmed the co-existence of multiple functional bacterial species, including AOB, NOB, denitrifying bacteria, anammox, PAOs, DPAOs, and GAOs. This provides strong evidence for concurrent removal of organics and nutrients in all three configurations of the integrated unit. In summary, this study emphasizes the need for ongoing research in energy efficiency to safeguard our environmental resources.@en

This study focuses on the development of an air-lift bio-electrochemical reactor (ALBER) with a continuous feeding regime. The objective is to enhance nitrogen removal from synthetic wastewater with a low carbon-to-nitrogen (C/N) ratio. The chemical oxygen demand (COD) and total nitrogen (TN) of the influent wastewater were 500 and 200 mg/L, respectively. The effect of four independent variables, i.e., temperature, hydraulic retention time (HRT), N−NH₄⁺/TN ratio and current density in the range of 16–32 °C, 6–12 h, 25–75%, and 2–10 A/m², respectively, at three levels on the bio–electrochemical reactor performance were investigated during the bio–electrochemical reactor operation. The Face Center Cube (FCC) of response surface methodology (RSM) was used for design of experiments and model of obtained data. The ALBER achieved the maximum TN removal of 73% (146 mg/l) using external voltage and zeolite/plastic medium at temperature of 16 °C, HRT of 6 h, current density of 2 A/m² and N−NH₄⁺/TN ratio of 75%. The results indicated that shortening the HRT from 12 to 6 h, reducing the temperature from 32 °C to 24 °C, increasing the current density from 2 to 6 A/m² and the reduction of nitrate concentration caused an increase in the TN removal. The results indicated that the performance of air-lift bio-electrochemical for nitrogen removal could be attributed to autotrophic denitrification (AD) and simultaneous nitrification/denitrification (SND). The research findings suggest that the ALBER should be further studied for potential use in treating industrial wastewater at low temperatures.

@en

In this work, a one-stage dual internal circulation airlift anaerobic/anoxic/aerobic (DCAL-A2O) bioreactor was continuously operated for concurrent removal of nutrients and organics from milk processing wastewater (MPW). Special configuration of the airlift A2O bioreactor created possibility of the formation of desired anaerobic, anoxic and aerobic zones in a single unit. The process functionality of the bioreactor was examined under three influential operating variables i.e. hydraulic retention time (HRT; 7–15 h), air flow rate (AFR; 1–3 L/min) and aerobic volume ratio (AVR; 0.324–0.464). The optimum region was identified at HRT of 13h, AFR of 2L/min and AVR of 0.437, leading to TCOD, TN and TP removal efficiency of 94.5 %, 59.6 %, and 62.2 %, respectively, and effluent turbidity of 8 NTU. The impact of feed biodegradability on the process performance of the bioreactor treating the MPW, soft drink wastewater (SDW) and soybean oil plant wastewater (SOW) was also assessed. From the results, the feed characteristics affected significantly the nutrients removal. Moreover, the feeding location played an effective role in the nutrient removal while treating the MPW at optimum operating conditions. In this study, the change in residual organic matters as soluble microbial products (SMP) was monitored at various operating conditions. In addition, the impact of SMP extracted from sludge, extracellular polymeric substances (EPS) comprising of loosely bound EPS (LB-EPS) and tightly bound EPS (TB-EPS) was analyzed on sludge characteristics as bio-flocculation and settleability properties. According to the obtained data, the increase in operating variables led to the reduction in contents of effluent SMP, sludge SMP, LB-EPS, turbidity, and SVI, thereby, the enhancement in the sludge characteristics. Meanwhile, analysis of microbial communities verified the presence of various functional bacterial species. The cost operating evaluation confirmed the cost effectiveness of the airlift A2O bioreactor in reduction of energy consumption for the MPW treatment.

@en