Real-world route navigation data indicate that nontrivial portion of drivers do not prefer the system-recommended best routes. Current navigation systems have simplified assumptions about drivers’ route choice preferences and do not adequately accommodate drivers’ heterogeneous route choice preferences, mainly because of: (i) difficulty in acquiring exogenous criteria (e.g., sociodemographic information) that are typically used to differentiate drivers’ preferences in behavioral modeling; and (ii) difficulty in capturing preference of individuals due to limited preference data at the individual level. To address these, this paper introduced a human-centric machine learning technique named Multi-Task Linear Classification Model Adaption (MT-LinAdapt). It can capture drivers’ common aspects of route choice preferences and yet adapts to each driver’s own preference. In addition, any evolvement of individual drivers’ preferences can be simultaneously integrated to update the common preference for further individual drivers’ preference adaptation. This paper evaluated MT-LinAdapt against two state-of-the-art route recommendation strategies including an aggregate-level and an individual-level data-based strategies, which are categorized based on the data used for modeling. With a real-world dataset containing 30,837 drivers’ navigation usage data in Daegu City, South Korea, MT-LinAdapt was compared to existing strategies for its performance at different levels of data availability, and showed at least the same performance with existing strategies when minimum preference data is available and achieves up to 7% higher prediction accuracy as more data becomes available. Higher prediction accuracies are expected to bring better user satisfaction and compliance rates which can further help with transportation system control and management strategies.@en

This study evaluated the performance of an eco-approach control system at signalized intersections under a partially connected and automated vehicle (CAV) environment. This system has the first eco-approach controller able to function with the existence of surrounding human-driven traffic. A previous evaluation only confirmed its benefits. The purpose of this study was to conduct a further extensive test on the controller to identify room for improvement. Two different networks were tested, including an isolated signalized intersection and a corridor with two signalized intersections. The measures of effectiveness (MOEs) adopted were throughput and fuel consumption. All the before-and-after MOEs were compared using t-tests. The results indicate that the controller generally improved the fuel efficiency without harm to the mobility, and its environmental performance was affected by the minimum CAV speed, green ratio, congestion level, and marker penetration rate of CAVs. A detailed investigation revealed that no significant environmental benefit was generated under high congestion levels when the minimum speed of CAVs was more than 20 mph, and the shockwaves caused by the eco-approach control may result in a gating effect that reduces the throughput at the upstream intersection of the corridor under high congestion levels.

@en

This research proposed an eco-driving system for an isolated signalized intersection under partially Connected and Automated Vehicles (CAV) environment. This system prioritizes mobility before improving fuel efficiency and optimizes the entire traffic flow by optimizing speed profiles of the connected and automated vehicles. The optimal control problem was solved using Pontryagin's Minimum Principle. Simulation-based before and after evaluation of the proposed design was conducted. Fuel consumption benefits range from 2.02% to 58.01%. The CO₂ emissions benefits range from 1.97% to 33.26%. Throughput benefits are up to 10.80%. The variations are caused by the market penetration rate of connected and automated vehicles and v/c ratio. No adverse effect is observed. Detailed investigation reveals that benefits are significant as long as there is CAV and they grow with CAV's market penetration rate (MPR) until they level off at about 40% MPR. This indicates that the proposed eco-driving system can be implemented with a low market penetration rate of connected and automated vehicles and could be implemented in a near future. The investigation also reveals that the proposed eco-driving system is able to smooth out the shock wave caused by signal controls and is robust over the impedance from conventional vehicles and randomness of traffic. The proposed system is fast in computation and has great potential for real-time implementation.

@en