Formation cycling is a critical process aimed at improving the performance of lithium ion (Li-ion) batteries during subsequent use. Achieving highly reversible Li-metal anodes, which would boost battery energy density, is a formidable challenge. Here, formation cycling and its impact on the subsequent cycling are largely unexplored. Through solid-state nuclear magnetic resonance (ssNMR) spectroscopy experiments, we reveal the critical role of the Li-ion diffusion dynamics between the electrodeposited Li-metal (ED-Li) and the as-formed solid electrolyte interphase (SEI). The most stable cycling performance is realized after formation cycling at a relatively high current density, causing an optimum in Li-ion diffusion over the Li-metal-SEI interface. We can relate this to a specific balance in the SEI chemistry, explaining the lasting impact of formation cycling. Thereby, this work highlights the importance and opportunities of regulating initial electrochemical conditions for improving the stability and life cycle of lithium metal batteries.

The development of commercial solid-state batteries has to date been hindered by the individual limitations of inorganic and organic solid electrolytes, motivating hybrid concepts. However, the room-temperature conductivity of hybrid solid electrolytes is still insufficient to support the required battery performance. A key challenge is to assess the Li-ion transport over the inorganic and organic interfaces and relate this to surface chemistry. Here we study the interphase structure and the Li-ion transport across the interface of hybrid solid electrolytes using solid-state nuclear magnetic resonance spectroscopy. In a hybrid solid polyethylene oxide polymer–inorganic electrolyte, we introduce two representative types of ionic liquid that have different miscibilities with the polymer. The poorly miscible ionic liquid wets the polymer–inorganic interface and increases the local polarizability. This lowers the diffusional barrier, resulting in an overall room-temperature conductivity of 2.47 × 10⁻⁴ S cm⁻¹. A critical current density of 0.25 mA cm⁻² versus a Li-metal anode shows improved stability, allowing cycling of a LiFePO₄–Li-metal solid-state cell at room temperature with a Coulombic efficiency of 99.9%. Tailoring the local interface environment between the inorganic and organic solid electrolyte components in hybrid solid electrolytes seems to be a viable route towards designing highly conducting hybrid solid electrolytes.