Wind turbine wake and modelling is crucial to optimizing future wind farm layouts and hence reducing the cost of energy. This paper presents the first phase of a blind test on modelling controlled and uncontrolled wind turbine wakes. The blind test is based on wind tunnel experiments of two model scale wind turbines (D = 1.1 m) one downstream of the other. The exercise is split into two phases and the first one is presented here, where participants are invited to simulate the baseline case, in which both turbines are aligned with the flow and there is no control on the either turbine. The objective of this phase is to ensure all participants can benchmark their numerical approach against a baseline open data set, where no wake control is applied. Experimental measurements include inflow velocity, turbine power and loads for a range of tip speed ratios. In the second phase, not presented here, the wake of the upstream turbine will be controlled and the performance of the downstream one will be recorded. This will be a blind test with the data not released prior to submissions. The present paper gives an overview of the initial, open benchmark case, including its objectives, methodology and experimental results.

A small didactic wind tunnel demonstrator has been designed and manufactured at the von Karman Institute for Fluid Dynamics to illustrate the physical principles at stake in flow-induced noise generation, offer an audible perception of the effectiveness of noise-mitigation strategies, and serve as a practical test bench for aeroacoustic education and research. Seven mitigation technologies are embedded in a single facility, which addresses the noise generation by an airfoil, noise propagation in a duct, and noise transmission through a flexible panel. A challenging objective of this facility was to offer a perceptible impression of various aeroacoustic noise mechanisms at low flow speeds and a live assessment of the effectiveness of the noise-reduction technologies. Different approaches combining multiple microphones, advanced signal-processing techniques, and real-time audio feedback have been implemented to this end. The results establish that the demonstrator enables a clear perception of the effectiveness of the noise-mitigation technologies. The facility is also suitable for fast and inexpensive preliminary investigations of future noise-reduction concepts, taking advantage of rapid prototyping techniques.

A small didactic wind tunnel demonstrator has been designed and manufactured at the von Karman Institute for Fluid Dynamics to illustrate the physical principles at stake in flow-induced noise generation, offer an audible perception of the effectiveness of noise-mitigation strategies, and serve as a practical test bench for aeroacoustic education and research. Seven mitigation technologies are embedded in a single facility, which addresses the noise generation by an airfoil, noise propagation in a duct, and noise transmission through a flexible panel. A challenging objective of this facility was to offer a perceptible impression of various aeroacoustic noise mechanisms at low flow speeds and a live assessment of the effectiveness of noise-reduction technologies. Different approaches combining multiple microphones, advanced signal-processing techniques, and real-time audio feedback have been implemented to this end. A digital twin has been developed to assist the design of the facility and test the concepts implemented in it. The results establish that the demonstrator enables a clear perception of the effectiveness of the noise-mitigation technologies. The facility is also suitable for fast and inexpensive preliminary investigations of future noise-reduction concepts, taking advantage of rapid prototyping techniques.