In the above article [1], Table I, III, and IV should show 'N/m' instead of 'kN/m' and they should also show 'Ns/m' instead of 'kNs/m.' The revised tables are shown below. Also, in (1), “k_pw ” should be changed to “k_pw.” And on page 2952, first line, in the left column, “They also found…” should be changed to “We also found…”.

A novel data-driven framework to monitor the health status of high-speed rail suspension system by measuring train vibrations is proposed herein. Unlike existing methods, this framework does not rely on sophisticated dynamic models or high-fidelity simulations; it combines the power of data and domain knowledge to generate a model that can be trained quickly and adapted easily to different rail systems. In addition, the framework includes a module to generate a training dataset, tackling a typical challenge in real-world system monitoring, namely, the lack of labeled data due to practical limits. Based on the multi-output support vector regression (MSVR), the proposed framework can monitor the stiffness and damping coefficients of the suspension system using vibration signals measured on trains in real time. The framework comprises three modules. First, a simple suspension system dynamics model is built to generate a training dataset. Furthermore, key features are extracted from frequency response curves to reflect the impact of spring and damper degradation. Subsequently, a supervised learning model based on the MSVR is built to predict the stiffness and damping coefficients of suspension systems from features extracted in the second module. Once the model is built, real-time monitoring can be achieved by feeding the vibration signals as they are collected during operations. The proposed framework was evaluated on simulation data for its accuracy and tested on real-world operational data for its practicability.

Condition monitoring, as part of the intelligent infrastructure concept, can significantly improve the reliability, safety and efficiency of rail operations. Degradation in infrastructure can be detected before a problem occurs, without interrupting normal operations. This paper contributes to the development of analytics tools and methods for condition monitoring using sensor data. A data-driven method is proposed to monitor the wheel wear of high-speed trains using onboard vibration sensors. In this method, a number of signal processing techniques and statistical methods are applied and extended to extract useful information from multi-location vibration data and estimate the wheel wear. We test the method using real operational data collected from high-speed trains in China over half a year. Preliminary results show that the method is accurate and can be easily applied to real world operations. The method can be extended to provide fault or degradation predictions, which reduces the in-service failures, and enables predictive maintenance.