Understanding telescope pointing (i.e. line of sight) is important for observing the cosmic microwave background (CMB) and astronomical objects. The Moon is a candidate astronomical source for pointing calibration. Although the visible size of the Moon (30^{`</sup>) is larger than that of the planets, we can frequently observe the Moon once a month with a high signal-to-noise ratio. We developed a method for performing pointing calibration using observational data from the Moon. We considered the tilts of the telescope axes as well as the encoder and collimation offsets for pointing calibration. In addition, we evaluated the effects of the nonuniformity of the brightness temperature of the Moon, which is a dominant systematic error. As a result, we successfully achieved a pointing accuracy of 3.3<sup>`}. This is one order of magnitude smaller than an angular resolution of 36^`. This level of accuracy competes with past achievements in other ground-based CMB experiments using observational data from the planets.

Cosmic microwave background (CMB) radiation is an afterglow from the Big Bang. CMB contains rich information about the early stage of the universe. In particular, odd-parity patterns (B-mode) in the CMB polarization on a large angular scale would provide an evidence of the cosmic inflation. The aim of the GroundBIRD experiment is to observe the B-mode on large angular scales from the ground. One of the most novel characteristics of the telescope used for this experiment is its rapid rotational scanning technique. In addition, the telescope uses cold optics and microwave kinetic inductance detectors. We have developed a telescope mount with a three-axis rotation mechanism (azimuth, elevation, and boresight) and measured the vibration at the focal plane stage at 20 RPM scan rotation rate. We also performed focal plane detector tests on this mount. The tests confirmed the expected response from the geomagnetism associated with the mount rotation. We have also developed a design for the magnetic shields and a detector array on a 3-in wafer. The preparations to begin the observations at the Teide Observatory in the Canary Islands in 2018 are proceeding smoothly.