The study of the internal component geometries (i.e. perforated elements) is relevant for the acoustic performance optimisation of a silencer. During the design phase, the evaluation of the properties of a silencer is performed by numerical analysis. In the literature, there is a lack of general guidelines and comparisons among different modelling strategies. So, in this study, the influence of grid type (i.e. trimmed vs tetrahedral) on the numerical prediction of the flow inside a reactive silencer is analysed. Moreover, using a porous baffle interface to model the perforated pipe is investigated, searching for a faster and easier way to model perforated elements. The simulations are carried out with the commercial CFD software STAR-CCM+. The comparison of the obtained axial velocity with a literature case study assesses the numerical model reliability. The analysis highlights that velocity and pressure predicted with both the mesh typologies does not significantly differ, but the trimmed mesh allows to save cells number, reducing the computational cost. Instead, obtain a reliable flow description using the porous baffle interface is strictly correlated to the settings of the resistance coefficient. This assumption does not provide accurate results for the analysed perforated pipe. On the other hand, using a simplified model allows to easily perform a comparison between different muffler geometries, as the holes have not to be drowned and meshed after each modification.

In recent years, green shipping becomes one of the fundamental challenges for the marine industry: the limits imposed on ship emissions by IMO (International Maritime Organization) are increasingly stringent, especially in terms of SOx (sulfur oxides). The installation on board of scrubbers has proved to be a helpful solution to SOx abetment, in particular for the ships already in navigation: it allows to respect the limits imposed by the IMO even with the use of HFOs (Heavy Fuel Oils), so without the need to carry out a complete refitting of the propulsion system. However, such systems, usually installed in the funnels, have large dimensions. The integration between components is the best method to optimize the spaces, facilitating the installation of the scrubbers on board. The present work investigates a combined CFD-FEM (Computational Fluid Dynamics-Finite Element Method) methodology to evaluate the acoustic performances of a model-scale scrubber. Some papers in the literature consider the acoustic properties of SCRs (Selective Catalytic Reduction systems) for marine applications, while a thorough study on scrubbers' performances is missing. Independent CFD or FEM calculations may evaluate the acoustic properties of the scrubber. However, the combined methodology reduces the computational burden by about 90% compared to the CFD modelling. Moreover, it gives the advantage of considering the influence of flow on acoustic properties, which is impossible for a fully FEM approach

Scrubber systems abate the sulphur oxide emissions of engines when cheap fuel oils that are high in sulphur content are employed as combustibles. However, the ships with these voluminous devices installed on board is space demanding. This work analyses the feasibility of incorporating the acoustic abatement of the exhaust gas noise functionality into the scrubber design to provide a combined scrubber–silencer system. For this purpose, a finite element analysis is performed on a simple expansion chamber, which is assessed using both analytical and experimental data. The transmission loss is the acoustic parameter chosen in this work. The numerical model depicts a good correlation with the transmission loss measured on a model scale scrubber. Finally, scrubber geometry modifications alter the transmission loss, changing and/or enhancing its featuring. These abilities indicate the feasibility to confer to scrubber silencing effects.