Scrubber systems abate the sulphur oxide emissions of engines when cheap fuel oils that are high in sulphur content are employed as combustibles. However, the ships with these voluminous devices installed on board is space demanding. This work analyses the feasibility of incorporating the acoustic abatement of the exhaust gas noise functionality into the scrubber design to provide a combined scrubber–silencer system. For this purpose, a finite element analysis is performed on a simple expansion chamber, which is assessed using both analytical and experimental data. The transmission loss is the acoustic parameter chosen in this work. The numerical model depicts a good correlation with the transmission loss measured on a model scale scrubber. Finally, scrubber geometry modifications alter the transmission loss, changing and/or enhancing its featuring. These abilities indicate the feasibility to confer to scrubber silencing effects.

Nowadays, fire-doors optimization is approached by using consolidated design guidelines and traditional materials, such as rock wool. Then, selected solution is directly tested in a mandatory fire-test. Unfortunately, few pieces of information could be retrieved either if the test succeeds or fails, which makes both improvements in the design and use of innovative materials difficult. Thus, in this work, a self-consistent finite element method (FEM) analysis is developed and assessed against experimental fire-test results, highlighting the critical parameters affecting the numerical simulations. Using this tool, a new fiberglass-containing foam, with improved acoustic and mechanical properties, as compared to the rock-wool, is studied as a potential insulating material for on-board fire-doors. The assessment of the performance of the new material demonstrates that, contrary to common believe, the effective thermal insulation capacity is not necessarily the critical factor in determining the fire-resistance of a fire-door. Using the validated FEM analysis, it has been proven that the reduction of the thermal bridges originated at the door edges allows, firstly, for the attainment of a fire-door 37% thinner and 61% lighter with respect to a traditional one, and, secondly, the use of new material as insulator in fire-doors that, even if less thermally capable, could improve other properties of the door, as an example its soundproofing.