The development of epoxy resin formulations from renewable feedstocks has been thoroughly explored in the chemical literature. A simple one-pot chemical reaction involving sustainable phenolic molecules and epichlorohydrin results in the production of renewable epoxy monomers. These monomers can be cured with amines or anhydrides to yield cross-linked thermosetting resins. Although a wide variety of recipes exist, there is a notable gap in the application of these sustainable resin formulations to engineering contexts. This gap is primarily due to the lack of comprehensive, standardized analyses of these resin recipes, which impede their potential use in advanced composite applications. In this study, we reveal a high-performance resin formulation utilizing epoxidized phloroglucinol derived from brown algae in combination with an aerospace-grade amine hardener. The resin processing and thermomechanical properties are investigated using ASTM standard tests including tensile strength, flexural strength, fracture toughness, and interlaminar shear strength. Given the detailed comparative analysis, the partially renewable resin recipe outperforms petroleum derived analogues.

The present study describes the development of cure kinetics and chemo-rheological models for an epoxy vitrimer based on polyimine exchange to elucidate the potential in terms of processing and accurate process selection. Reaction kinetics is investigated using differential scanning calorimetry. A good agreement between the model and data can be demonstrated for different stoichiometries by selecting a parallel reaction approach consisting of an nth-order and an autocatalytic approach. The suggested chemo-rheological model captures the intrinsically high viscosity of the resin over a broad temperature and curing range, even after the gelation point. The Di-Benedetto equation represents the glass transition temperature advancement with cure while combining the rheological Winter-Chambon criterion and the kinetic model determines the degree of cure at the gelation. These results give important advice for improved process modeling of vitrimeric resins, facilitate accurate process selection, and pave the way towards the development of composites based on the matrix system investigated in this work.