Laboratory investigations of beach morphology change under wave action are undertaken to gain insight into coastal processes, design coastal structures and validate the predictions of numerical models. For the results of such experiments to be reliable, it is necessary that they are repeatable. The equilibrium beach concept, that beach morphology will evolve to a quasi-static equilibrium shape for a given forcing suggests that experiments should be repeatable to some degree. However, sediment transport in turbulent breaking and broken waves is complex and highly variable and the level of repeatability at different temporal and spatial scales is challenging to measure, as such, previous work has restricted comparisons to small numbers of waves. Here we use the results of two identical, 20-h large-scale wave flume experiments to investigate the repeatability of sediment transport and beach morphology change under waves at timescales down to individual swash events. It is shown that while flow characteristics from identical swash events are very repeatable, the sediment transported can be very different in both magnitude and direction due to differences in turbulence, sediment advection and morphological feedback. Over longer periods containing multiple matching swash events however, the beach responds in a very similar manner, with the level of morphological repeatability increasing with time. The results also demonstrate that gross swash zone sediment transport remains high even as a beach profile approaches quasi-equilibrium, but the proportion of individual swash events that cause large sediment fluxes (>±7.5 kg/event/m) reduces with time. The results of this laboratory study indicate that beach morphology change has a level of determinism over timescales of several minutes and longer, giving confidence in the results from physical modelling studies. However, the large differences in sediment transport from apparently identical swash events questions the value in pursuing numerical predictions of sediment transport at the wave-by-wave timescale unless the reversals in sediment transport between apparently near identical swash events can also be predicted.

@en

The swash zone is a highly dynamic region of the nearshore in terms of both hydro- and sediment dynamics. Previous work has demonstrated that the majority of swash events transport only small amounts of sediment and net beachface volume change over several hours tends to be small. However, a small number of individual swash events can deposit or remove hundreds of kilograms of sediment per metre width of beach. These events are typically associated with swash flows that involve one or more highly turbulent swash-swash interactions, causing enhanced suspension and transport of sediment (Blenkinsopp et al. 2011). The timing and location of these interactions is complex and small changes in either can lead to very different local flow conditions. The complexity of these flows make sediment transport prediction on a swash-by-swash basis very challenging, and raises the question whether deterministic physical and numerical modelling of swash sediment transport is warranted.@en

High quality laboratory measurements of nearshore waves and morphology change at, or near prototype-scale are essential to support new understanding of coastal processes and enable the development and validation of predictive models. The DynaRev experiment was completed at the GWK large wave flume over 8 weeks during 2017 to investigate the response of a sandy beach to water level rise and varying wave conditions with and without a dynamic cobble berm revetment, as well as the resilience of the revetment itself. A large array of instrumentation was used throughout the experiment to capture: (1) wave transformation from intermediate water depths to the runup limit at high spatio-temporal resolution, (2) beach profile change including wave-by-wave changes in the swash zone, (3) detailed hydro and morphodynamic measurements around a developing and a translating sandbar.

@en