The butanediols (BDOs), 2,3-, 1,4- and 1,3-butanediol, are platform chemicals that are mainly produced from fossil hydrocarbons but may be obtained through fermentation. However, low product concentration, by-product formation and high boiling temperatures of BDOs hinder downstream processing and increase overall fermentation costs. This study increases the competitiveness of industrial biotechnology by designing a large-scale process (broth processing capacity of 160 ktonne/y) for the final purification of BDOs after fermentation (recovery >99 %). It includes an initial preconcentration step in a vacuum distillation column to remove most water and light impurities. The initial removal of most of the water and the use of a heat pump system allowed significant energy reduction. At the heart of the process is an integrated dividing-wall column that can efficiently purify BDO from the remaining light and heavy impurities. Moreover, a single process design was proven effective in purifying different BDOs to > 99.4 wt%. This was cost-effective (total purification costs of 0.208 – 0.243 $/kgBDO) and energy-efficient (with primary energy requirements of 1.854 – 2.176 kWthh/kgBDO). The proposed purification sequence can be used for each BDO type, which offers flexibility in developing sustainable bioprocesses for BDO production.@en

Ethyl acetate is a platform chemical conventionally obtained through fossil fuel routes, but more recently its production by fermentation from carbohydrates has been scaled up to a pilot scale. Yet, the complexity of downstream processing (low product concentrations in liquid broth and in off-gas, azeotrope formation, and the presence of microorganisms) may complicate industrial application. This original theoretical study is the first to develop advanced downstream processing, based on process intensification principles, for large-scale recovery (~10 kton/year) of ethyl acetate after fermentation. To minimize product losses, ethyl acetate is separated from both the liquid broth and off-gas. The final purification is performed in a highly integrated azeotropic dividing-wall column. The economic and sustainability analysis shows that using refrigeration for initial product separation from the gas phase is more cost-effective (~0.61 $/kg) and less energy-intensive (2.20–2.40 kW_thh/kg) than compression combined with high-pressure condensation using chilled water (1.09 $/kg and 9.98 kW_thh/kg).

@en

Pass-through distillation (PTD) is a novel separation technology that can effectively overcome challenges related to using vacuum distillation in bio-based processes (defined temperature limit for evaporation that might result in very low condensation temperature). This method allows evaporation and condensation to be performed at different pressures by decoupling them using an absorption-desorption loop with an electrolyte absorption fluid. This original paper presents a process design for large-scale bioethanol recovery from fermentation broth (production capacity ~100 ktonne/y) by PTD. The flexibility of the novel PTD technology is expanded by combining it with heat pumps (PTD-HP) and multi-effect distillation (PTD-MED). Total cost and energy requirements for the recovery of high-purity bioethanol (99.8 wt%) are respectively 0.122 $/kgEtOH and 1.723 kWthh/kgEtOH for PTD-HP, and 0.131 $/kgEtOH and 1.834 kWthh/kgEtOH for PTD-MED, proving the effectiveness of the newly designed recovery processes for concurrent alcohol recovery and fermentation.@en

Propionic acid is a valuable platform chemical that is usually produced via fossil routes. As these are energy-intensive and eco-unfriendly processes, fermentative production of propionic acid is becoming more attractive. However, the complex downstream processing (due to low achievable product concentrations, high water content, presence of by-products and thermodynamic constraints), presents a potential barrier to scale-up this technology. This original research proposes a novel intensified large-scale (production capacity of ∼ 20 ktonne/y) process for the final recovery of propionic acid after the initial biomass and counterion removal. Vacuum distillation steps ensure the recovery of a high-purity succinic acid product (>99.9 wt%) and a water stream that may be recycled to the fermentation to reduce the fresh water requirements. The main unit that follows is a highly integrated heat pump-assisted dividing-wall column (DWC), which allows the effective separation of propionic (>99.9 wt%) and acetic acid (99.4 wt%) products. Alternatively, it can serve as a reactive DWC that performs the esterification and separation of methyl propionate (99.8 wt%), methyl acetate (91.0 wt%) as higher added value products, and water by-product. If needed, extractive distillation can be implemented additionally to recover methyl acetate at higher purity (99.9 wt%). Overall, both options are proven to be economically interesting (recovery costs of 0.399 – 0.469 $/kg considering the product price of 1.349 – 1.802 $/kg) and environmentally attractive (3.206 – 3.678 kWthh/kg).@en

Distillation is the most used separation technology at industrial-scale, but using distillation in bio-based processes (e.g. fermentation processes to produce bioethanol) is quite challenging when mild temperatures are needed to keep the microbes alive. Vacuum distillation can be used to perform evaporation at low temperatures, but setting a low distillation pressure fixes also the condensation temperature to very low values that may require expensive refrigeration. Pass-through distillation (PTD) is an emerging hybrid separation technology that effectively combines distillation with absorption in a sorption-assisted distillation process that decouples the evaporation and condensation steps. This is achieved by inserting between the evaporation and condensation steps an absorption-desorption loop that passes through the component to be separated and allows the use of different pressures and types of heating and cooling utilities. This paper is the first to present the process design and rigorous simulation (implemented in Aspen Plus) of a new pass-through distillation process for bioethanol (∼100 ktonne/y plant capacity), proving its effectiveness in concurrent alcohol recovery and fermentation (CARAF). Combining PTD with heat pumps leads to low recovery costs of 0.122 $/kg_EtOH and energy requirements of only 1.723 kW_thh/kg_EtOH. Alternatively, combining PTD with multi-effect distillation resulted in 0.131 $/kg_EtOH recovery costs and 1.834 kW_thh/kg_EtOH energy intensity.

@en

Even though industrial biotechnology is successfully used for the production of some chemicals, for many other chemicals it is not yet competitive with conventional petrochemical production. Usually, fermentation as well as downstream processing requires improvement. Downstream processing has to deal with low product concentrations, microorganisms, impurities and thermodynamic constraints (e.g., azeotropes), which often makes it very challenging and expensive, especially on a large scale. However, downstream processing of biochemicals has not attracted as much attention as upstream fermentation processes. In that context, this perspective paper offers a lightly referenced scholarly opinion about the downstream processing performance of different bioalcohols after fermentation. Due to the stronger toxicity effects on microbes, the achievable concentrations of monohydric aliphatic alcohols in the fermentation broth decrease with the increasing chain length. Specifically, the concentrations used here are 6.14, 5.00, 1.61 and 0.24 wt% of ethanol, isopropanol, isobutanol and hexanol, respectively. More dilute fermentation broths lead to more complex recovery processes. According to our previous work, the total purification costs increase from 0.080 USD kg−1 for ethanol, 0.109 USD kg−1 for isopropanol and 0.161 USD kg−1 for isobutanol to 0.529 USD kg−1 for hexanol. A similar trend is noticeable for the energy usage (0.960, 1.348, 2.018 and 3.069 kWthh kg−1, respectively) and the related CO2 emissions (0.164, 0.221, 0.449 and 0.555 kgCO2 kg−1, respectively). This work shows that advanced separation and purification based on process intensification principles are crucial for overall efficient production processes. The achievable product concentration in the fermentation broth – and not so much the alcohol chain length – has the biggest influence on the performance of downstream processing. Therefore, simultaneous development of both upstream and downstream processing is necessary to ensure the competitiveness and viability of industrial fermentation processes. © 2024 The Author(s). Journal of Chemical Technology and Biotechnology published by John Wiley & Sons Ltd on behalf of Society of Chemical Industry (SCI).@en

Isobutanol is a highly attractive renewable alternative to conventional fossil fuels, with superior fuel properties as compared to ethanol and 1-butanol. Even though the isobutanol production by fermentation has significant potential, complex downstream processing is limiting the wide-spreading of this technology. Accordingly, this original research significantly contributes to the advancement in industrial biofuel production by developing two eco-efficient downstream processes for the industrial-scale recovery of isobutanol (production capacity 50 ktonne_IBUT/y), from a highly dilute fermentation broth (>98 wt% water). Vacuum distillation and a novel hybrid combination of gas stripping and vacuum evaporation were coupled with atmospheric azeotropic distillation to recover over 99.9 % of isobutanol as a high-purity product (100 wt%). Advanced heat pumping and heat integration techniques were further implemented to allow the complete electrification of these recovery processes. Furthermore, implementation of these techniques significantly decreased total annual costs (0.131–0.161 $/kg_IBUT), reduced energy requirements (0.488–0.807 kW_eh/kg_IBUT) and lowered CO₂ emissions (0.303–0.449 kg_CO2/kg_IBUT), resulting in highly competitive purification processes. In addition to efficiently recovering isobutanol, the designed downstream processes provide the potential to enhance the fermentation process by recycling all present microorganisms and reducing water demand. Therefore, the results of this original research substantially contribute to the advancement in industrial biotechnology and the wide-spreading of biofuel production.

@en

PDO (1,3-propanediol) is a platform chemical that is obtained by petrochemical routes and by fermentation. The latter needs relatively complex downstream processing after fermentation, due to the modest concentration of the high-boiling product, and the presence of microorganisms and many impurities in the fermentation medium. This novel research proposes an original large-scale (production capacity of 23 – 32 ktonne/y) process for the final purification of PDO and dominant by-products, from the fermentation of glucose or glycerol. Following the initial microfiltration, diafiltration, ultrafiltration and ion exchange steps, heat pump-assisted vacuum distillation was implemented to remove most of the water from the broth. Afterwards, an advanced highly-integrated dividing-wall column was designed to allow the final purification of PDO (product purity > 99.9 wt%) from light and heavy by-products. Fermentation by-products that are present in significant amounts can also be recovered and valorized. Overall, the developed final purification processes demonstrate cost-effectiveness (0.150 – 0.274 $/kg) and energy-efficiency (1.258 – 3.175 kWthh/kg) which contributes to the competitiveness of the overall downstream processing (0.256 – 0.384 $/kg and 1.487 – 3.496 kWthh/kg).@en

Isopropanol-butanol-ethanol (IBE) fermentation is a superior biofuel production technology as compared to acetone-butanol-ethanol (ABE) fermentation due to the better fuel properties of the obtained products. However, low product concentrations, thermodynamic constraints and the presence of microorganisms lead to complex downstream processing that limits the competitiveness of this biofuel production method. Thus, this original research proposes a novel thermally self-sufficient and eco-efficient downstream process for industrial-scale recovery after IBE fermentation (74 ktonne/y capacity), from a highly dilute broth (>97 wt% water). Gas stripping and heat pump-assisted vacuum evaporation were implemented to separate valuable products from most of the broth. Furthermore, an advanced highly integrated heat pump-assisted azeotropic dividing-wall column was designed to recover high-purity (99 wt%) butanol biofuel and isopropanol – ethanol fuel supplement (89 wt%). The proposed purification process recovers over 99 % of biofuel products in a cost-effective (0.130 $/kg_IBE) and energy-efficient way (0.673 kW_eh/kg_IBE) while allowing full recycle of biomass and most of the separated water. Besides improving yield by continuously recovering the inhibitory products, fermentation can be further enhanced by avoiding biomass loss and reducing water requirements. Lastly, the implemented energy-saving techniques ensure complete electrification of the proposed IBE recovery process. Therefore, the original results of this research study significantly contribute to the development of sustainable biofuel production processes.

@en

BACKGROUND: Isopropanol and acetone production by syngas fermentation is a promising alternative to conventional fossil carbon-dependent production. However, this alternative technology has not yet been scaled up to an industrial level owing to the relatively low product concentrations (about 5 wt% in total). This original research aims to develop cost-effective and energy-efficient processes for the recovery of isopropanol and acetone from highly dilute fermentation broth (>94 wt% water) for large-scale production (about 100 kt_IPA+AC y⁻¹). RESULTS: Vacuum distillation and pass-through distillation enhanced with heat pumps or multi-effect distillation were efficiently coupled with regular atmospheric distillation and extractive distillation in several innovative intensified downstream processes. Over 99.2% of isopropanol and 100% of acetone were recovered as high-purity end-products (>99.8 wt%). Advanced heat pumping (mechanical vapor recompression) and heat integration techniques were implemented to decrease total annual costs (0.109–0.137 USD kg_IPA+AC⁻¹), reduce energy requirements (1.348–2.043 kW_th h kg_IPA+AC⁻¹) and lower CO₂ emissions (0.067–0.191 kg_CO2 kg_IPA+AC⁻¹), resulting in highly competitive recovery processes. CONCLUSION: The proposed three novel isopropanol and acetone recovery processes from dilute broth significantly contribute to the expansion of sustainable industrial fermentation. Furthermore, this original research is the first one to develop novel pass-through distillation technology for the complex isopropanol–acetone–water system. All the designed processes are highly economically competitive and environmentally viable. In addition to recovering efficiently both isopropanol and acetone, the designed downstream processes offer the possibility to enhance the fermentation process by recycling all the present microorganisms and reducing fresh-water requirements.

@en

This original research contributes to enhancing the viability of biorefineries through recovering valuable by-products from the liquid remaining after the biomass pretreatment by hot liquid water. A novel downstream processing method is developed for the recovery of acetic acid, formic acid, furfural and 5-hydroxymethylfurfural (HMF) by enhanced distillation. The major challenge in this research is the processing of the highly diluted initial solution (>96 wt% water) and the thermodynamic limitations owing to possible formation of several azeotropes. This new process recovers 78.7% of the acetic acid (99.8 wt%), while the rest of it is recycled back to the biomass pretreatment step together with most of the separated water from the initial solution. Over 99.5% of formic acid, furfural and HMF is also recovered, at purities of 74.7, 98.0 and 100 wt%, respectively. Vapor recompression and heat integration are implemented to decrease the energy use. The results demonstrate a 77.4% decrease in total annual costs (from $3.44 to 0.78/kg_product), a 75.0% reduction in minimum average selling price (from $3.50 to 0.87/kg_product), an 81.1% reduction in energy requirements (from 77.41 to 14.66 kW_thh/kg_product) and an up to 99.7% decrease in CO₂ emissions (from 11.17 to 0.03 kg_CO2/kg_product).

@en

Syngas fermentation is used industrially to produce diluted bioethanol (about 1–6 wt%). This research study proposes a novel downstream process that recovers bioethanol in an energy-efficient and cost-effective manner, improves fermentation yield by recycling all fermentation broth components (microbes, acetate and water), and is designed for full-scale industrial-level application. Therefore, vacuum distillation at fermentation temperature was conceptually studied as an initial ethanol recovery step, leading to a bottom stream that may be recycled. Advanced separation and purification techniques were designed to recover 99.5% of initially present ethanol as high-purity product (99.8 wt%). Mechanical vapor recompression and heat integration methods were used to maximize sustainability and eco-efficiency of the proposed recovery process. Implementation of these techniques on a process using 6 wt% ethanol feed stream decreased the total annual costs by 54.2% (from 0.175 to 0.080 $/kg_EtOH), reduced the primary energy requirement by 66.1% (from 2.82 to 0.96 kW_thh/kg_EtOH), lowered the CO₂ emission by up to 82.6% (from 0.414 to 0.072 kg_CO2/kg_EtOH), and reduced the fresh water usage by 62.6% (from 0.242 to 0.091 m³_W/kg_EtOH). Sensitivity analysis for ethanol concentrations ranging from 6 to 1 wt% showed that the recovery costs and energy use increased to 0.336 $/kg_EtOH and 1.78 kW_thh/kg_EtOH respectively. Since ethanol recovery performs better but fermentation will perform worse at higher ethanol concentration in fermentation broth, there is a trade-off concentration for the overall process. The current analysis is an important step toward determining this trade-off.

@en

Lignocellulosic biomass potentially represents a great feedstock for biofuel production, but its’ pretreatment needs to be enhanced in order to make biorefineries competitive with fossil fuel based alternatives. One way to make biorefineries more economically viable is to recover and valorize all generated by-products during the biomass pretreatment step. The main goal of this original research is to design an optimal process for recovering valuable by-products after hot-liquid water pretreatment of poplar biomass. Rigorous models for all operations included in the recovery process are developed using Aspen Plus as a CAPE tool. An optimal downstream processing sequence, consisting of multiple distillation steps, is designed to recover several valuable components, such as acetic acid, formic acid, furfural and 5-hydroxymethylfurfural (HMF).

@en

Increasing concerns over environmental pollution, climate change and energy security are driving a necessary transition from fossil carbon sources to more sustainable alternatives. Due to lower environmental impact, biochemicals are rapidly gaining significance as a potential renewable solution, particularly of interest in Europe. In this context, process systems engineering (PSE) helps with the decision-making at multiple scales and levels, aiming for optimum use of (renewable) resources. Fermentation using waste biomass or industrial off-gases is a promising way for the production of these products. However, due to the inhibitory effects or low substrate concentrations, relatively low product concentrations can be obtained. Consequently, significant improvements in downstream processing are needed to increase the competitiveness of the overall bioprocesses. This paper supports sustainable development by providing new PSE perspectives on the purification of volatile bioproducts from dilute fermentation broths. Since purification significantly contributes to the total cost of biochemical production processes (20%–40% of the total cost), enhancing this part may substantially improve the competitiveness of the overall bioprocesses. The highly advanced downstream process offers the possibility of recovering high-purity products while enhancing the fermentation step by continuously removing inhibitory products, and recycling microorganisms with most of the present water. Besides higher productivity, the upstream process can be greatly improved by avoiding loss of biomass, enabling closed-loop operation and decreasing the need for fresh water. Applying heat pumping, heat integration and other methods of process intensification (PI) can drastically reduce energy requirements and CO2 emissions. Additionally, the opportunity to use renewable electricity instead of conventional fossil energy presents a significant step toward (green) electrification and decarbonization of the chemical industry.@en